PCB Libraries, Inc. | https://www.pcblibraries.com/forum/sot236p65-footprint-and-padstack_topic2896_post11544.html
. You can change this in Tools > Options > Pad Stack Rules > SMD Minimum Trim and Spacings > Minimum Trim Stand-off Height. > 0.03 Change to 0.00 if you want to leave the pads under a package that has no standoff
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/topic2896&OB=ASC.html
0.03. You can change this in Tools > Options > Pad Stack Rules > SMD Minimum Trim and Spacings > Minimum Trim Stand-off Height. > 0.03 Change to 0.00 if you want to leave the pads under a package that has no standoff
| http://etasmt.com/cc?ID=te_news_industry,3361&url=_print
(lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the smaller lead inductance。 Disadvantages Manual prototype assembly or component-level repair is more difficult and requires skilled operators and more expensive tools, due to the small sizes and lead spacings of many SMDs
| http://etasmt.com/te_news_industry/2013-03-23/3361.chtml
(lower radiated emissions) due to the smaller radiation loop area (because of the smaller package) and the smaller lead inductance。 Disadvantages Manual prototype assembly or component-level repair is more difficult and requires skilled operators and more expensive tools, due to the small sizes and lead spacings of many SMDs
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/pdf-print-output-feature_topic760_post2708.html
. Then you insert the component package outline around (or inside the hole pattern) and save to a PKG file format. The hole locations can be on many different grid spacings and various hole sizes and plating options
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/pdf-print-output-feature_topic760.html
. Then you insert the component package outline around (or inside the hole pattern) and save to a PKG file format. The hole locations can be on many different grid spacings and various hole sizes and plating options
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/pdf-print-output-feature_topic760_post2704.html
. Then you insert the component package outline around (or inside the hole pattern) and save to a PKG file format. The hole locations can be on many different grid spacings and various hole sizes and plating options
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/topic760&OB=ASC.html
. Then you insert the component package outline around (or inside the hole pattern) and save to a PKG file format. The hole locations can be on many different grid spacings and various hole sizes and plating options
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/footprint-land-pattern-naming-convention_topic29_post1963.html
: 152 Post Options Post Reply Quote Mattylad Report Post Thanks(0) Quote Reply Posted: 05 Oct 2012 at 12:58pm I find that components always need to be created in mm, however for track/gap spacings, track widths etc thou is fine and there are no problems. Using mils (or thou as we use
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/footprint-land-pattern-naming-convention_topic29_post1969.html
find that components always need to be created in mm, however for track/gap spacings, track widths etc thou is fine and there are no problems. Using mils (or thou as we use) is a much easier number to remember as I do not need to remember something point
