| http://etasmt.com/te_news_bulletin/2021-08-31/23575.chtml
. Typically we measure intermetallic growth over months and years. However, during the reflow process, the intermetallic growth is somewhat accelerated due to the high thermal excursions
| http://etasmt.com:9060/te_news_industry/2021-09-01/24565.chtml
density of the components. Reflow the board and measure the real time thermal profile simultaneously. Check the solder joint quality, PCB and component status
| http://etasmt.com/te_news_industry/2021-09-01/24565.chtml
density of the components. Reflow the board and measure the real time thermal profile simultaneously. Check the solder joint quality, PCB and component status
| http://etasmt.com:9060/te_news_bulletin/2021-09-02/24962.chtml
. To demonstrate the repeatability of the process conditions, specific tests were conducted to measure the performance of the I.C.T Oven under several process loading conditions
| http://etasmt.com:9060/te_news_industry/2021-09-15/26567.chtml
. The best way to do this is to first designate a production team to measure performance and understand where improvements are needed
| http://etasmt.com/te_news_bulletin/2020-10-08/19761.chtml
. Before using the reflow oven, use a temperature measuring instrument to measure whether the temperature of each temperature zone of the reflow oven is consistent and uniform; 5
| http://etasmt.com/te_news_industry/2021-09-15/26567.chtml
. The best way to do this is to first designate a production team to measure performance and understand where improvements are needed
| http://etasmt.com:9060/te_news_bulletin/2020-11-07/20361.chtml
. Measure temperature: insert the sensor into the receiving socket of the tester one by one, turn on the power switch of the tester, put the tester in the reflow soldering and reflow soldering with the old PCB board, take
| http://etasmt.com/te_news_bulletin/2020-11-07/20361.chtml
. Measure temperature: insert the sensor into the receiving socket of the tester one by one, turn on the power switch of the tester, put the tester in the reflow soldering and reflow soldering with the old PCB board, take
| http://etasmt.com:9060/te_news_industry/2021-09-01/24361.chtml
In order to create a reflow profile thermocouples are connected to a sample assembly (usually with high temperature solder) in a number of locations to measure the range of temperatures across the PCB
