ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/products/solder-paste/fluxplus-paste-flux
Iron / Alloy42 Nickel Silver Palladium Platinum Silver Solder Plated Stainless Steel Tin Titanium Non-solderable Zinc Flux Types Recommended Use RMA Rosin mildly activated Recommended RA Rosin activated Wets clean surfaces NC No clean Alloy specific (contact EFD
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/polymer-processing-systems/information/screw-materials
. These grades usually contain either lead or are re-sulphurized. This makes them, for all practical purposes, impossible to rebuild by hard surface welding due to extreme porosity and stress cracks
| https://www.eptac.com/ask/j-std-001f-4-5-1-gold-removal-class-2-requirement-changed/
)? Connectors and surface mount oscillators are only available in Gold over Nickel terminations and are difficult to tin and re-package. Answer: The reasoning for the change was due to the failures happening in the field with these types of components
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/products/efd-products/fluxplus-paste-flux
Iron / Alloy42 Nickel Silver Palladium Platinum Silver Solder Plated Stainless Steel Tin Titanium Non-solderable Zinc Flux Types Recommended Use RMA Rosin mildly activated Recommended RA Rosin activated Wets clean surfaces NC No clean Alloy specific (contact EFD
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/products/adhesive-dispensing-systems-products/unity-ic-series-dispensers
) Unity IC 30 applicator Supply voltage 200-240 VAC, 1 phase, 50/60 Hz, 250 W (supplied from controller) Sensor type 120 ohm nickel or 100 ohm platinum Unity IC300 applicators Supply voltage 200-240 VAC, 1 phase, 50/60 Hz, 700 W
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/resource-center/solder-selection-guide
Monel Nichrome Nickel Nickel Iron / Alloy42 Nickel Silver Palladium Platinum Silver Solder Plated Stainless Steel Tin Titanium Non-solderable Zinc Key Recommended Alloy Specific (contact EFD
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=5255
today’s lead-free soldering applications. A series of soldering dissolution experiments, modeled on Bader’s, were conducted using SAC305 solder with gold, silver, palladium, platinum, copper and nickel samples
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/resources/solder-selection-guide
Monel Nichrome Nickel Nickel Iron / Alloy42 Nickel Silver Palladium Platinum Silver Solder Plated Stainless Steel Tin Titanium Non-solderable Zinc Key Recommended Alloy Specific (contact EFD
| https://www.eptac.com/ask/gold-wire-bond-failing-pull-test/
: We have a situation where we have gold boards which accept gold wire bonding, but are failing a pull test. Other than making sure the boards are clean with a quick trip into the degreaser, is there any other way to refresh gold plating to help these boards pass pull testing
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/ipc-standards-for-manufacturing-assembly_topic877_post9030.html
and Flexible Adhesive Bonding Films IPC-4204 - Flexible Metal-Clad Dielectrics for Use in Fabrication of Flexible Printed Circuitry IPC-4552 - Specification for Eletroless Nickel/Immersion Gold (ENIG
