Technical Library | 2023-08-14 09:06:53.0
In the operation of SMT mounter, the process and integrity of the nozzle of the mounter will have a significant impact on the performance of the machine. As one of the important components of the SMT machine, it is necessary for us to carry out daily maintenance and upkeep of the SMT nozzle. To ensure that the suction nozzle of the SMT machine is intact before operation, how should we do a good job of maintaining the suction nozzle of the SMT machine during normal use? KINGSUN technical team analysis operation has the following main points: 1.Wipe the surface of the SMT nozzle with a dust-free cloth. 2.The small aperture nozzle can be passed through with a thin steel wire and then blown with an air gun. 3.The surface of the nozzle should not be soaked with corrosive solution such as alcohol, as this may cause the surface to fall off. 4.HOLDER should use a cotton swab to wipe the cavity and not damage the filter screen. 5.Regular addition of special grease to HOLDER claws. 6.According to production, it is best to regularly maintain and do other maintenance regularly. (* Suitable for Yamaha SMT machine nozzles , JUKI SMT machine nozzles, Samsung SMT machine nozzles, Panasonic SMT machine nozzles, Fuji SMT machine nozzles, Siemens SMT machine nozzles etc.) Regarding the SMT machine nozzle daily maintenance operation instructions, KINGSUN share with you here , hoping to be helpful to you. More information about Products please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com , thanks.
Technical Library | 2017-02-01 02:20:42.0
BGA Rework Course encompasses the skills necessary to perform rework of electronic printed circuit boards to include PBGA and CBGA technologies. There should be 'one-stop' solution, that offers a wide range of ball grid array rework and repair services.
Technical Library | 2015-08-27 15:32:16.0
Ever since there has been a widespread usage of surface mount parts, the trend of continued shrinkage of devices with ever finer pitches has continued to challenge PCB assemblers for the rework of same. Todays' pitches are commonly 0.5 to 0.4mm with packages of tiny outline sizes, 5 -10mm square, making the rework of such devices a challenge. In addition to the handling and inspection challenges comes the board density. Spacing to neighboring components continues to be compressed so the rework techniques should not damage neighboring components.
Technical Library | 2019-04-15 22:18:13.0
The choice of supplier, first of all, is to choose the products offered by suppliers in the market. Since materials that meet certain product functional requirements are not unique, there are many alternatives. There are many factors to consider when purchasing, such as product quality, supply capacity, price, delivery time, reputation, supplier strength, after-sales service and other factors, but specific to the procurement of shipping tubes, we feel the following four points need special attention:
Technical Library | 2019-04-23 08:44:43.0
The ic tubes should be placed in a cool and ventilated place, avoiding direct sunlight.....
Technical Library | 2024-12-10 15:55:12.0
A review of what acid cleaning is for metallic metal components and what metals should be processed by acid cleaning.
Technical Library | 2017-06-29 15:41:36.0
What's the most cost-effective method for testing prototype PCBs? Should the assembler do it, or the client's in-house engineers? This article explains all.
Technical Library | 2010-04-07 18:54:31.0
For effective machine vision, the first step in devising a vision system should be the lighting. This paper reviews important criteria for setting up an effective lighting system.
Technical Library | 2018-03-05 11:22:48.0
Growing demands for smaller electronic assemblies has resulted in reduced sizes of passive components, requiring the introduction of newer components, such as the 01005 devices. Component miniaturization presents significant challenges to the traditional surface mount assembly process. A successful assembly solution for these 01005 devices should be repeatable and reproducible, and should include guidelines for (i) the selection of solder paste and (ii) appropriate stencil and substrate pad design, and should ensure strict process control standards.
Technical Library | 2024-11-26 16:43:34.0
A review of factors to consider when evaluating the depanel of a PCB and what you should consider when making a decision on the best process for your project.
winsouce.jpg)