Used SMT Equipment | Pick and Place/Feeders
Type of machine: DT401-F, R to L flow (1x 3NZ head, incl. direct tray tower (rear side) Year of production 2006
Used SMT Equipment | SPI / Solder Paste Inspection
PARMI/SPI SPIHS60 MACHINE PARMI HS60 (supreme) solder paste thickness tester SPI The SPI HS60 (supreme) series is the next generation fastest online solder paste inspection system on the market. The measurement speed at a resolution of 13x13um is
Used SMT Equipment | Pick and Place/Feeders
Modern high performance Manncorp / Autotronik pick and place machine with 60 electronic smart feeders. The current model is the MA392v1 or BA392v1 and both have a base price of around 70,000.00. It is my understanding that this machine has all the sa
Used SMT Equipment | Pick and Place/Feeders
Make: Assembleon Model AX-501 Details:1High Output Rate: The AX-501 has a maximum output rate of 165,000 components per hour, and 121,000 components per hour under the IPC 9850 standard.2.High Precision: Placement accuracy is 40 microns at 3 sigma wi
Used SMT Equipment | Other Equipment
Apply The PCB Loader is designed for loading of PCBs. The unit loads your production line automatically by pushing PCB’s out of a magazine onto the conveyor of the down-stream machine. Connect with SMT and AI productions line, safety design en
Used SMT Equipment | Other Equipment
Apply The PCB Unloader is designed for unloading of PCBs, an arriving PCB is taken up by the attached conveyor and then pushed into the magazine by a specially designed pusher. The magazine indexes to the next position and is ready for the follow
Used SMT Equipment | General Purpose Equipment
Apply The PCB NG/OK Unloader is connected to the back of AOI and has horizontal movement and go-through functions. The OK and NG PCB after being tested by AOI can be separated and sent to the PCB racks, so that the PCB can be protected better.
Used SMT Equipment | Soldering - Wave
Working width: 330 mm (13") Solder module: Type: lead-free double wave solder module Solder volume: approx. 390 kg (860 lb.) LEADFREE approx. 335 kg (739 lb.) lead-free alloy Warm-up time: approx. 2.5 h Preheating length: 1,100 mm (43.3") Fl
Used SMT Equipment | Pick and Place/Feeders
1.00: 35 micron for chips & 25 micron for QFP Component range - minimum: 0.4 x 0.2 mm (01005) to - maximum: 45 x 45 mm Maximum component height: 10.5 mm (0.41”) [optional: 12 mm (0.47”) ] Automatic toolbit exchan
Used SMT Equipment | SMT Equipment
Many Fuji Sparr parts for sales.. No Part No. Description Qty. Machine 1 GPH4580 HOLDER 7 CP43 2 MPH0472 PISTON 19 CP43 3 GPL1200 PIN 8 CP43 4 S1046A CIR-CLIP WR19 10 CP43 5 PPQ1020 PIN,LOCATING 1 CP43 6 GXT2333 HOLDER,PIN 2 CP43 7 MPA5031 COLLAR 2 C
1 |