Industry News | 2023-04-03 13:18:43.0
MicroCare is proud to offer a wide range of excellent replacements for the 3M Novec™ specialty cleaning fluids. This comes in response to 3M's recent announcement that it will discontinue manufacturing all fluoropolymers, fluorinated fluids, and PFAS-based additive products by the end of 2025, including Novec™ 7100, 71DE, 7200, 72DE, 72DA, 73DE and others.
Industry News | 2023-06-19 13:48:04.0
Kurtz Ersa Inc. is pleased to announce the dates for its next highly anticipated VERSAFLOW 3 Maintenance and Application Training Courses. The courses will take place at the Kurtz Ersa facility in Ft. Worth, TX. The VERSAFLOW 3 Selective Soldering Level II Maintenance Training Course is scheduled from Tuesday, July 18, 2023 at 8:30 a.m. to Wednesday, July 19, 2023 at 5 p.m. Following this, the VERSAFLOW 3 Selective Soldering Level II Application Training Course will be held from Thursday, July 20, 2023 at 8:30 a.m. to Friday, July 21, 2023 at 5 p.m.
Industry News | 2021-05-31 21:38:35.0
It goes without saying that correct dimensional measurement is a key factor in manufacturing. Performing measurements with the same reference throughout all processes from material reception to processing, assembly, inspection, and shipping make it possible to create products that match the design exactly and to guarantee product quality. Thus, it is essential to perform correct measurements throughout every step of the manufacturing process. Correct measurements can be done by making sure that all those involved in manufacturing are skilled in measuring, and that the measuring instruments are correctly managed and used.
Industry News | 2021-08-19 05:26:13.0
First, you need to do the following things before starting the servo motor.
Industry News | 2021-12-03 20:03:25.0
Differential pressure transmitter is a kind of pressure measuring instrument widely used in all kinds of chemical industry. Working principle of differential pressure transmitter is as follows. The differential pressure from the two-sided pressure pipes acts directly on the two-sided isolation diaphragm of the differential pressure transmitter sensor, and is transmitted to the measuring element through the sealing fluid in the diaphragm. The measuring element converts the measured differential pressure signal into the corresponding electrical signal and transmits it to the converter. After amplification and other processing, it becomes the standard electrical signal and then is output.
Industry News | 2021-11-04 21:34:47.0
Hollow shaft encoder is also known as hollow encoder. When installing this type of encoders, it is necessary to avoid rigid connection with the encoder. Please refer to the instructions for the size of the installation shaft. When installing, the encoder should be gently pushed into the quilted shaft. It is strictly forbidden to knock with a hammer, in order to avoid damaging the bearing and the encoder as whole. After a hollow encoder has been used for a long time, you should check whether the screws fixing the encoder are loose.
Industry News | 2021-12-30 20:09:47.0
Using a straight edge and a feeler gauge to examine the flatness error between cylinder head, cylinder block, crankcase and bottom cover, which should not be more than 0.05mm, otherwise, you should grind it. If there are cracks in the cylinder block and cylinder head through observing or knocking, replace them with new ones.
Industry News | 2021-05-19 22:36:33.0
Calibration is the process of configuring an instrument to provide a result for a sample within an acceptable range. This process eliminated or minimized factors that cause inaccurate measurements. Although the exact procedure may vary from product to product, the calibration process generally involves using calibration instrument to test samples of one or more known values called "calibrators". The results are then used to establish a relationship between the measurement technique used by the instrument and the known values. The process in essence "teaches" the instrument to produce results that are more accurate than those that occur otherwise. The instrument can then provide more accurate results when samples of unknown values are tested in the normal usage of the product.
Industry News | 2021-12-15 20:08:31.0
Siemens pressure transmitter is a kind of equipment which converts pressure into pneumatic signal or electric signal for control and remote transmission. It can convert the physical pressure parameters such as gas and liquid sensed by the load cell sensor into standard electrical signals (such as 4 ~ 20mADC), which can be supplied to the secondary instruments such as indicating alarm instrument, recorder and regulator for measurement, indication and process adjustment.
