Industry News | 2018-06-18 11:18:40.0
Toggled in Troy, MI will be liquidating some of their excess and unused assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 8:00am EST on July 5th and the closing will begin at 1:00 pm EST on July 11th.
Industry News | 2013-10-02 14:39:35.0
Baja Bid announced its latest event which features quality used equipment at discounted prices for the electronics manufacturing industry.
Industry News | 2020-07-01 12:08:16.0
For high precision low stress PCB singulation of panels with sensitive components near the parting edge, and with the smooth edge finish required by military specifications or by packaging considerations, using a Diamond Blade Saw beats routing for speed and for blade life. The saw blade, a 2.95" (75mm) diameter .021" thick diamond coated cutting disk, provides a low-stress, ultra smooth edge finish for separting panelized Printed Circuit Cards. ts which overhang the parting line will remain intact.
Industry News | 2017-01-25 16:39:34.0
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120”, .093” and .062”. Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is often the case when using hand tools or when breaking the panels manually. In addition, since only one tab is cut at a time, minimal stress is imparted to the board during the process as the panel is not pressed between two points during the cut.
Industry News | 2019-09-06 14:46:04.0
THREE BLADE CHOICES FOR SINGULATING RECTANGULAR TAB ROUTED PCBS CLEANLY SINGULATE STANDARD AND FLEX CIRCUIT PANELS WITHOUT DUST Cleanly
Industry News | 2019-10-03 14:15:15.0
SMTA announced Pete Lomas, FREng, Co-Founder and Hardware Designer of Raspberry Pi, will keynote the Advanced Electronics Assembly Conference on November 19, 2019 in Budapest, Hungary, and November 21, 2019 in Oradea, Romania.
Industry News | 2010-04-10 02:16:34.0
IPC has released the E revision of IPC-A-610, Acceptability of Electronic Assemblies. IPC's most widely-used standard, which provides visual acceptance criteria for post assembly mechanical and soldering assembly requirements, now addresses additional technologies, including flexible circuits, board in board, package on package, depanelization and additional SMT terminations.
Industry News | 2022-02-17 12:52:30.0
Cleanly and easily separate a row of up to 10 tabs without dust. Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N115 Nibbler from FKN Systek. Two sharp support blades on either side of the tab help cleanly slice the PCBs from the tabs.
Industry News | 2022-09-21 08:26:26.0
Cut up to 10 Tabs in one Stroke
Industry News | 2010-09-02 16:09:40.0
Each step in the electronics assembly process will be on display and fully functioning on the show floor at Electronics Midwest, produced by IPC — Association Connecting Electronics Industries® and Canon Communications.
.png)
