Industry News | 2021-12-24 20:11:55.0
In the hermetic compressor, the motor and the compressor share the main shaft (reciprocating type), and the compressor unit is suspended in the housing by spring. The casing is divided into upper and lower parts. After the internal components are assembled, the upper and lower interfaces will be sealed by welding. The suction pipe, exhaust pipe, and process pipe are drawn out of the outer shell.
Industry News | 2010-09-21 09:46:59.0
Dynamic Advance Allows Engineers to Instantaneously Map and Measure Pressure Distribution between Heat Sinks and Components in Real Time
Industry News | 2005-04-20 13:21:59.0
New PC/104-Plus SpacePC CPUs combine fanless -40C to +85C extended temperature operation with 256MB of soldered RAM for high reliability in mobile computing applications
Industry News | 2021-12-23 20:40:03.0
As both manufacturers and end customers know, in a refrigeration or air conditioning system, the compressor is the equipment core by continuously sucking back and exporting refrigerant. Once the compressor breaks down or stops working, the whole cooling system will be interrupted. Piston compressor is widely used in large and medium-sized cold storage. Here we will explain in detail the structure, working principle, advantages and disadvantages and common fault diagnosis of piston compressors.
Industry News | 2021-12-15 20:08:31.0
Siemens pressure transmitter is a kind of equipment which converts pressure into pneumatic signal or electric signal for control and remote transmission. It can convert the physical pressure parameters such as gas and liquid sensed by the load cell sensor into standard electrical signals (such as 4 ~ 20mADC), which can be supplied to the secondary instruments such as indicating alarm instrument, recorder and regulator for measurement, indication and process adjustment.
Industry News | 2020-10-22 03:17:25.0
4 Questions to help you better understand the High and Low Temperature Chamber
Industry News | 2019-12-16 22:35:33.0
Vacuum reflow oven is to conduct high-quality welding for products in a vacuum environment to protect products and solder from being oxidized under the condition of vacuum, and to react the oxide of products and solder surface at the same time to improve the quality of welding surface and reduce the void rate of welding.
Industry News | 2021-12-03 20:03:25.0
Differential pressure transmitter is a kind of pressure measuring instrument widely used in all kinds of chemical industry. Working principle of differential pressure transmitter is as follows. The differential pressure from the two-sided pressure pipes acts directly on the two-sided isolation diaphragm of the differential pressure transmitter sensor, and is transmitted to the measuring element through the sealing fluid in the diaphragm. The measuring element converts the measured differential pressure signal into the corresponding electrical signal and transmits it to the converter. After amplification and other processing, it becomes the standard electrical signal and then is output.
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Industry News | 2015-10-19 12:58:40.0
Morgan Advanced Materials announces it has received a favorable letter of opinion from the U.S. Food and Drug Administration (FDA) for a variety of its carbon/graphite, sintered silicon carbide, and reaction bonded silicon carbide materials produced by its Seals and Bearings business. The letter of opinion covers repeated-use, wear components for food applications, including mechanical face seals, bearing, bushings, vanes, and rotors.
.png)
