Industry News | 2009-11-11 13:39:57.0
Paraquda is the newest SMD pick-and-place machine that Essemtec has introduced at the Productronica exhibition in Munich, Germany. The machine sets a new standard for flexible placement machines: Drive technologies, materials and software are state-of-the-art, machine operation is a user friendly and the application range is wider than ever before.
Industry News | 2021-11-04 21:34:47.0
Hollow shaft encoder is also known as hollow encoder. When installing this type of encoders, it is necessary to avoid rigid connection with the encoder. Please refer to the instructions for the size of the installation shaft. When installing, the encoder should be gently pushed into the quilted shaft. It is strictly forbidden to knock with a hammer, in order to avoid damaging the bearing and the encoder as whole. After a hollow encoder has been used for a long time, you should check whether the screws fixing the encoder are loose.
Industry News | 2019-11-05 22:05:41.0
The printed circuit board, or PCB, is responsible for connecting all the components with each other in your electronic assembly. Making just one tiny error in the design could lead to complete failure. PCB layout design requires ardent precision and great technological skills.
Industry News | 2020-11-19 11:25:25.0
Manual testing can take up most of a technician's time. The solution to the problem can be auto-mated testing using signature analysis systems. However, even here you can face the problem of lack of documentation for the board. This problem is not acute if there is documentation or if we are talking about new boards, the documentation for which is publicly available. However, what if the boards have been produced for a long time, and the documentation has been lost? In this case, intelligent recognition systems can help, which will allow you to identify component pins without documentation for the board. In this article we will show you how easy and fast it is possible thanks to our EyePoint p10 and EyePoint S2 systems, using the STM32F429 board as an example.
Industry News | 2021-12-30 20:09:47.0
Using a straight edge and a feeler gauge to examine the flatness error between cylinder head, cylinder block, crankcase and bottom cover, which should not be more than 0.05mm, otherwise, you should grind it. If there are cracks in the cylinder block and cylinder head through observing or knocking, replace them with new ones.
Industry News | 2022-07-08 19:36:15.0
- Includes formal syntax checker - Allows entire PCB industry to move forward toward easier and safer data exchange
Industry News | 2014-01-29 14:44:32.0
Arrival Electronics introduces the FerriSSD® series from Silicon Motion. FerriSSD® is a fully integrated SATA/PATA Solid State Drive(SSD) in a single chip BGA package. Available in densities from 1GB to 64GB in a tiny 16x20mm BGA package, in both SLC and MLC flash along with Silicon Motion's own unique SLC mode technology, offering SLC level performance at MLC pricing.
Industry News | 2008-04-07 23:18:22.0
MORRISVILLE, NC - March 31, 2008 - Juki Corporation, a world-leading provider of automated assembly products and systems, announces that its OPASS technology won a NPI Award in the Software category. The award was presented to the company during a Monday, March 31, 2008 ceremony that took place in the Mandalay Bay Resort & Convention Center in Las Vegas before the start of APEX 2008. OPASS, which stands for Offset Placement After Solder Screen Printing, was developed to address the problem of solder paste alignment errors.
Industry News | 2008-04-08 22:36:16.0
MORRISVILLE, NC - April 2, 2008 - Juki Corporation, a world-leading provider of automated assembly products and systems, announces it was named as a first finalist for its OPASS technology in the Design and Manufacturing Software category during the VISION Awards announcement ceremony that took place Wednesday, April 2, 2008 in Las Vegas during APEX 2008. OPASS, which stands for Offset Placement After Solder Screen Printing, was developed to address the problem of solder paste alignment errors.
Industry News | 2008-04-08 23:53:03.0
MORRISVILLE, NC - April 2008 - Juki Corporation, a world-leading provider of automated assembly products and systems, announces that it won a 2008 SMT China Vision Award for its OPASS technology in the Software - Production category during an awards ceremony that took place April 8, 2008 at the Shanghai Everbright Convention & Exhibition International Hotel during NEPCON China/EMT China. OPASS, which stands for Offset Placement After Solder Screen Printing, was developed to address the problem of solder paste alignment errors.