Industry News | 2021-05-19 22:36:33.0
Calibration is the process of configuring an instrument to provide a result for a sample within an acceptable range. This process eliminated or minimized factors that cause inaccurate measurements. Although the exact procedure may vary from product to product, the calibration process generally involves using calibration instrument to test samples of one or more known values called "calibrators". The results are then used to establish a relationship between the measurement technique used by the instrument and the known values. The process in essence "teaches" the instrument to produce results that are more accurate than those that occur otherwise. The instrument can then provide more accurate results when samples of unknown values are tested in the normal usage of the product.
Industry News | 2017-04-11 21:21:11.0
KYZEN today announced plans to participate in the Contamination, Cleaning & Coating Conference, scheduled to take place May 22-24, 2017 in Amsterdam. The event is co-organized by SMTA and SMART Group. Mike Bixenman, DBA, KYZEN Corporation will present “Development of a Risk Profile from Flux Residues Trapped under Leadless Components” in Session I entitled “Residues Trapped under Component Terminations”. All presentations in this session will address a common question faced by OEMs when designing electronic hardware: How clean is clean enough?
Industry News | 2016-09-07 18:44:03.0
KYZEN announces that Dr. Mike Bixenman will present the recent paper entitled, “Reactivity of No-Clean Flux Residues Trapped Under Bottom Terminated Components” during SMTA International. The paper is co-authored by Bruno Tolla, Ph.D., Jennifer Allen and Kyle Loomis from Kester and will be presented during the “Flux, Solder, Adhesives Track” on Tuesday, September 27, 2016 at 3 p.m.
Industry News | 2021-01-30 07:00:01.0
MacDermid Alpha Electronics Solutions announces the release of STAYDRY® H2-3000PSA, a hydrogen and moisture getter for hermetic packages. STAYDRY H2-3000PSA adds a newly developed proprietary adhesive that meets rigid outgassing and adhesion testing for aerospace, telecom and medical applications, meeting Mil-STD-883K, Method 5011.6 and NASA ASTM E595 requirements.
Industry News | 2019-11-05 22:07:01.0
Tenting a via refers to covering via with soldermask to enclose or skin over the opening. A via is a hole drilled into the PCB that allows multiple layers on the PCB to be connected to each other. A non tented via is just a via that is not covered with the soldermask layer. Leaving these vias exposed or covered has pros and cons depending on the your design and manufacturing requirements.
Industry News | 2014-03-20 14:21:26.0
COOL-PAD™ CPR 7154 provides both compressibility and conformability with phase-change ability to achieve the best of thermal grease performance.
Industry News | 2014-06-05 12:21:18.0
AI Technology introduces COOL-GUMPAD™ CGP7156, a new class of thermal interface material with extreme compressibility to fill in all uneven and unparallel thermal interface surfaces in LED luminaire modules, large area power modules and large area metal-core printed wiring board (MCPWB) applications.
Industry News | 2021-05-24 04:37:04.0
HVAC stands for heating, ventilation, and air conditioning. This system provides heating and cooling to residential and commercial buildings. These systems use fresh air from the outdoors to provide high indoor air quality. The V in the HVAC or ventilation is the process or replacing or exchanging air within a space.
| 1 |
