Industry News | 2021-05-19 22:36:33.0
Calibration is the process of configuring an instrument to provide a result for a sample within an acceptable range. This process eliminated or minimized factors that cause inaccurate measurements. Although the exact procedure may vary from product to product, the calibration process generally involves using calibration instrument to test samples of one or more known values called "calibrators". The results are then used to establish a relationship between the measurement technique used by the instrument and the known values. The process in essence "teaches" the instrument to produce results that are more accurate than those that occur otherwise. The instrument can then provide more accurate results when samples of unknown values are tested in the normal usage of the product.
Industry News | 2021-12-28 20:35:34.0
If the refrigerator compressor is broken and can no longer be repaired, you need to buy a new one to replace it. When replacing, you need to follow the correct steps. Then how to change the refrigerator compressor? The following are the detailed steps.
Industry News | 2010-02-19 09:45:37.0
Pressurex® Sensor Film Needed to Measure Contact Pressure In Ultrasonic Welding
Industry News | 2012-04-03 13:23:35.0
Aqueous Technologies Corp., North America’s largest provider of batch defluxing systems and cleanliness testing equipment, announces that it is now shipping the new EcoCycler Rinse Water Recycler.
Industry News | 2021-06-03 03:28:28.0
In the Telecommunications world, a Transmitter is a device that produces radio waves radiating from an antenna. In the world of process control, a Transmitter is a device that converts the signal produced by a sensor into a standard instrumentation signal representing a process variable being measured and controlled.
Industry News | 2021-12-30 20:09:47.0
Using a straight edge and a feeler gauge to examine the flatness error between cylinder head, cylinder block, crankcase and bottom cover, which should not be more than 0.05mm, otherwise, you should grind it. If there are cracks in the cylinder block and cylinder head through observing or knocking, replace them with new ones.
Industry News | 2021-12-15 20:08:31.0
Siemens pressure transmitter is a kind of equipment which converts pressure into pneumatic signal or electric signal for control and remote transmission. It can convert the physical pressure parameters such as gas and liquid sensed by the load cell sensor into standard electrical signals (such as 4 ~ 20mADC), which can be supplied to the secondary instruments such as indicating alarm instrument, recorder and regulator for measurement, indication and process adjustment.
Industry News | 2012-04-27 09:17:12.0
Aqueous Technologies Corp., North America’s largest provider of batch defluxing systems and cleanliness testing equipment, announces that it is been awarded a 2012 EM Asia Innovation Award in the category of Cleaning Equipment for its Typhoon High Performance Inline Cleaning/Defluxing System
Industry News | 2021-12-13 20:10:54.0
As one of the power sources of manufacturing and production enterprises, compressed air requires continuous operation of equipment to ensure the stability of air supply pressure, which is also the basic condition of production and operation of enterprises. The air compressor unit, the main manufacturing equipment, is the core machine to undertake this task, and its continuous and reliable run ensures its own stable operation. Since it is a piece of running equipment, it needs a power supply to operate, large power consumption is the core of cost increase.
Industry News | 2021-06-01 06:01:48.0
Power Plant uses a certain power source to generate electrical power. The power plant control system controls the amount of fuel, water and air supplied to the boiler of the power plant, controls the start and stop of the plant and many other functions related to the power plant. This ensures that the power plant functions as intended with the highest efficiency.
