Industry News | 2018-10-18 08:32:52.0
How to Prevent Solder Ball and Bridging Defects during the SMT Reflow Process
Industry News | 2021-11-02 21:27:05.0
The wiring and installation of rotary encoders should be conducted in strict accordance with the instructions of each product. While for general encoder installation guidelines, you should pay attention to the following aspects during your encoder mounting work.
Industry News | 2021-08-16 04:51:07.0
The refrigerator malfunction may be caused by the refrigeration system or the electrical system. When judging the compressor fault, you should first confirm whether the electrical system is working normally.
Industry News | 2021-08-24 20:44:45.0
The refrigerator malfunction may be caused by the refrigeration system or the electrical system. When judging the compressor fault, you should first confirm whether the electrical system is working normally. You should check if the power plug is in contact with the power switch, if the fuse is open, if the power connection is normal, and the power voltage. You should also inspect where the thermostat is placed, whether the temperature sensor leaks, whether the temperature adjustment is appropriate, and if the induction action is working.
Industry News | 2021-08-19 05:26:13.0
First, you need to do the following things before starting the servo motor.
Industry News | 2021-12-27 20:26:21.0
When speaking of air conditioners, everyone is familiar with them. Especially in the hot summer, we would not know how to live without it. But when it comes to refrigeration compressors, many consumers are not particularly clear. In fact, the refrigeration compressor is an important part of air conditioners and refrigerators, and its performance and quality directly determine the cooling effect of them. The following is an introduction to the types of refrigeration compressors.
Industry News | 2021-12-28 20:23:06.0
As is known to us, rotary encoders consist of incremental encoders and absolute encoders. And absolute encoders are much more expensive than incremental encoders. In fact, both two types of encoders are used for position measurement. So what's the point of using an absolute encoder? For distance measurement applications, both incremental and absolute encoders can be chosen - from a technical point of view. The advantages of absolute encoders are reflected in accuracy and performance, while incremental encoders seem more economical and practical.
| 1 |
