Parts & Supplies | Circuit Board Assembly Products
1). FR-4 Material 2). 2 layer, 1.2mm thick 3). 5 oz copper weight. 4). LPI Green solder mask/White silk screen 5). Immersion gold over nickle
Parts & Supplies | Circuit Board Assembly Products
1). 80 *190mm/2up, FR-4 2). 6 layers at 1.4mm thick 3). 35 μm copper weight 4). Green solder mask LPI/White legend 5). ENIG surface finish 6). Blind via from Layer 1 to layer 2 7). Via in pad plugged conductive resin
Parts & Supplies | Circuit Board Assembly Products
1) 36*36mm/1up, Aluminium type: A5052 2) Thermal conductivity: 0.8-1.3 W/mk, 3) Single sided, 1.6mm 4) White solder mask/ Black Legend 5) Copper weight: 35μm 6) Surface Finish: ENIG 7) Profile: Punch
Parts & Supplies | Circuit Board Assembly Products
1). FR-4 Material 2). 2 layer, 1.2mm thick 3). 1 oz copper weight. 4). LPI Green solder mask/White silk screen 5). Gold finger 40 microinch, bevelled. 6). HASL + Gold finger, ENIG + gold finger 7). Larg volum, punch contour.
Parts & Supplies | Circuit Board Assembly Products
1). 24 hours lead time. 2). FR-4 Material, Single sided or Double sided. 3). 1 oz copper weight, 1.6mm thick. 4). Green solder mask /white silkscreen 5). 4/4 mil track/space, 0.3mm minimum holes 6). Hot air level finish
Parts & Supplies | Circuit Board Assembly Products
1). Any different PCB's in one Panel within 400 x 500mm 2). Same material and Thickness. 2). FR-4 Material, Double sided. 3). 1 oz copper weight, 1.6mm thick. 4). Green solder mask /white silkscreen 5). Hot air level finish
Parts & Supplies | Circuit Board Assembly Products
1). 177 x 75mm (2UP), FR-4 Tg 170 2). 1.6mm +/-10%, 6 layer 3). Min. hole 0.15mm, 4/4 track/gap 4). Finished copper weight inner/outer 1 oz 5). Green solder mask/ White ident 6). Immerstion gold. 7). Fine and micro BGA
Parts & Supplies | Soldering - Wave
Overseas Agent and Distributor Wanted ! Features : Spray Fiuxer: 1) Oriental motor drives the flux spraying system. Spraying speed is adjusted according to PCB board width and moving speed to ensure even spraying all time. 2) Durable “Meiji
Parts & Supplies | Circuit Board Assembly Products
1) Single Sided PCB 2) Material: XPC (94HB), FR-1 (94V0) 3) Thickness: 1.0mm, 1.2mm, 1.6mm 4) Copper weight: 0.5 oz, 1 oz 5) UV solder mask 6) Profile: Punch/ rout 7) Surface finish: OSP, Electro Gold
Parts & Supplies | Circuit Board Assembly Products
1). 1+C+1 HDI, buried/blind L1-L5/L5-L8 vias. 2). FR-4 Material, 1 oz weight. 3). 8 layer, 1.6mm thick. 4). 4/4 mils track and space 5). Min.drill 0.1mm 6). Green solder mask/ white silkscreen 7). Immersion gold over nickel