Parts & Supplies | Circuit Board Assembly Products
1). Material: CEM-1/CEM-3, 2). Single sided, 1.6mm material 3). 1 oz copper finished 4). Green solder mask/white silkscreen letter 5). OSP surface finish 6). Punched contour
Parts & Supplies | Circuit Board Assembly Products
1). PCB Thickness up to 5mm 2). FR-4 material, 1 oz copper finished 3). Green solder mask /white silk screen. 4). Blind/buried vias required. 5). Hot air level Pb free 6). Application: motor, medical equipment, industrial products.
Parts & Supplies | Circuit Board Assembly Products
1). 100mm x 98mm/1up, FR-4, 2). 1mm +/-0.1mm，6 Layers 3). 1oz copper finished 3). Green solder mask/white legend 4). Min. hole 0.15mm, 4/4 mil track/gap 5). Blind via layer 1-2, via-in-pad. 6). Immersion gold surface finish
Parts & Supplies | Circuit Board Assembly Products
1). Material CEM-3, FR-1 2). Double sided, 1.6mm, 1oz 3). Silver through hole 4). Green solder mask/white silk screen 5). OSP finish 6). Punch contour/cnc rout
Parts & Supplies | Circuit Board Assembly Products
1). Any different PCB's in one Panel within 400 x 500mm 2). Same material and Thickness. 2). FR-4 Material, Double sided. 3). 1 oz copper weight, 1.6mm thick. 4). Green solder mask /white silkscreen 5). Hot air level finish
Parts & Supplies | Circuit Board Assembly Products
1). FR-4 Tg 170 + Rogers 4350B 2). 290*130mm/1up 3). 6 layers at 1.6mm thick 4). Green solder mask/White ident 5). 35um copper finished, ED copper. 6). Electroless gold. 7). Countersunk slots.
Parts & Supplies | Circuit Board Assembly Products
1). 80 *190mm/2up, FR-4 2). 6 layers at 1.4mm thick 3). 35 μm copper weight 4). Green solder mask LPI/White legend 5). ENIG surface finish 6). Blind via from Layer 1 to layer 2 7). Via in pad plugged conductive resin
Parts & Supplies | Circuit Board Assembly Products
1) Single Sided PCB 2) Material: XPC (94HB), FR-1 (94V0) 3) Thickness: 1.0mm, 1.2mm, 1.6mm 4) Copper weight: 0.5 oz, 1 oz 5) UV solder mask 6) Profile: Punch/ rout 7) Surface finish: OSP, Electro Gold
Parts & Supplies | Repair/Rework
PG-P6860 Main Features： 1、 The top heater can move freely along the X, Y axis in the IR preheating area. It is good for many BGA chips distribution at different positions in the PCB board which need repair. X-shaped infrared laser can do rapid lo
Parts & Supplies | Repair/Rework
PG-N4500 Main Features： 1、Adopt liner slide which makes X、Y、Z axis all can do precision adjustment or fast positioning, with high positioning accuracy and fast maneuverability. 2、High definition touch screen (Taiwan) , PCL control, can save m
.jpg)
