Industry Directory | Manufacturer
S.B.TECHNOLOGIES provides Electronics Manufacturing Services with 0402 CHIP SMT Assembly,BGA, Thru-Hole PCB Assembly, Wave Soldering, Reflow Soldering, Mixed Technology Printed Circuit Board Assembly build to IPC-Workmanship Stand
Industry Directory | Manufacturer
We are Malaysia Public Listed company subsidiary with capability in BGA, Reworking, Reballing, X-Ray, SMT, 0402 Chip, AI, ICT and F/A. We are ISO 9001 certified with RoHS Compliant and LMW status which is for free tax to service oversea customers.
Hanwha SM481 PLUS Pick and Place Machine 10 Spindles × 1 Gantry Component available: 0402 ~ 42mm(H 15mm) Max PCB: 460 × 400mm Speed:40,000CPH Product description: Hanwha SM481 PLUS Pick and Place Machine 10 Spindles × 1 Gantry, Component available:
Hanwha HM510 Pick and Place Machine High Speed: 60,000 CPH Placement Accuracy:±40 μm @ Cpk ≥ 1.0 (Chip) / ±30 μm @ Cpk ≥ 1.0 (IC) Component Range:0402 ~ 55 mm Spindles: 6 spindles x 2 Gantry Hanwha HM510 Pick and Place Machine Hanwha HM510 P
Electronics Forum | Sun Oct 09 20:40:28 EDT 2011 | Jacki
Hi We found the misalignment sometime during SMT 0402chips. So, we made the pick up speed a bit slower then the condition was better however it was time-consuming and delay shipment. We r using Yamaha 100Xg SMT M/C and no probelm in mounting 0602 o
Electronics Forum | Wed Oct 12 08:02:31 EDT 2011 | emeto
It looks like a nozzle size issue. Make sure you have the right nozzle size for the part as well as the right feeder.I think that if the machine takes the parts from the feeders, it can't be feeder problem. Usually parts will jump out of the feeder
Used SMT Equipment | Chipshooters / Chip Mounters
SMT Pick and Place Universal [UIC] 4797 4797A-0-11002 12 Head Rotary Turret Tape & Reel Feeder Compatible 0402 Placement Capability
Used SMT Equipment | Chipshooters / Chip Mounters
2000 Fuji CP-643E SMT Pick & Place Approx Dimensions: 16'2" x 78" x 76" Location: Jasper, IN USA Serial: 1396 Features: o 4800 Vision Card o Narrow and Wide Camera o Capable of 0402 Component part placement o Pam Data Provided o Copy of Machine Prope
Industry News | 2018-10-18 08:00:40.0
SMT solder joint quality and appearance inspection process
Industry News | 2018-10-18 08:01:00.0
SMT solder joint quality and appearance inspection process
Parts & Supplies | Pick and Place/Feeders
YAMAHA FS8*2MM FEEDER Feature : Yamaha SMT SMD Spares Part. Part Number: KJK-M1100-001. Part Name: FS Type Feeder 8x2mm. For 0402 Chip Brand : YAMAHA Unit : PC(s)
Parts & Supplies | Pick and Place/Feeders
YAMAHA FS8*2MM FEEDER Feature : Yamaha SMT SMD Spares Part. Part Number: KJK-M1100-001. Part Name: FS Type Feeder 8x2mm. For 0402 Chip Brand : YAMAHA Unit : PC(s)
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2017-09-28 16:36:33.0
These nano-coatings also refine the solder paste brick shape giving improved print definition. These two benefits combine to help the solder paste printing process produce an adequate amount of solder paste in the correct position on the circuit board pads. Today, stencil aperture area ratios from 0.66 down to 0.40 are commonly used and make paste printing a challenge. This paper presents data on small area ratio printing for component designs including 01005 Imperial (0402 metric) and smaller 03015 metric and 0201 metric chip components and 0.3 mm and 0.4 mm pitch micro BGAs.
Model name CM602-L Model NM-EJM8A Substrate size L 50 mm × W 50 mm ～ L 510 mm × W 460 mm High-speed placement head 12 nozzles Mounting speed 100 000 cph (0.036 s/chip) Mounting accuracy ±40 μm/chip (Cpk ≧1) www.smt11.cn Co
Description MODEL ID: CM402-L MODEL NUMBER: KXF-4Z4C PCB DIMENSIONS: L 50 mm x W 50mm to L 510 mm Ã? W 460 mm HEAD TYPE: Type A-2 (12/12 nozzles HIGH-SPEED) (OPTION) Number of nozzles: 12 nozzles/head Maximum speed: 0.052 s/chip (69,500
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Mon Apr 12 00:00:00 EDT 2021 - Mon Apr 12 00:00:00 EDT 2021 | ,
Europe Chapter Webinar: Tombstoning Components during Reflow Soldering - Causes & Cures
Career Center | , | Engineering,Production
Project Management, SMT Process Engineering
Career Center | Bangalore, India | Engineering,Maintenance,Production,Technical Support
SMT Stencil designing & Knowledge of full SMT process software known CAD/CAM -circuit CAM Pro 7.3,GC Power station, GCCAM Edit,Auto CAD, Fault finding of Electronic Boards & Servicing electronic machines.
SMTnet Express, May 21, 2015, Subscribers: 22,770, Members: Companies: 14,358, Users: 38,224 Beyond 0402M Placement: Process Considerations for 03015M Microchip Mounting Brent Fischthal, Michael Cieslinski; Panasonic Factory Solutions Company
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/chips-add-more-types-of-silkscreens_topic3026_post12142.html
Chips: Add More Types of Silkscreens - PCB Libraries Forum - Page 2 Forum Home > PCB Footprint Expert > Product Suggestions New Posts FAQ Search Events Register Login Chips
1st Place Machinery Inc. | http://www.firstplacemachinery.com/firstplace_europlacer.html
5.0 mm Component range: 0402 to 50 x 50 (12 mm max, component height) Max. speed: 6000 components per hour +/- 0.100 mm Accuracy for Chips
