Industry Directory | Manufacturer
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
Industry Directory | Manufacturer
A US manufacturer of quality hand tools for those engaged in the repair, rework, R & D, testing, and assembly of electronic components and printed circuit boards from Through Hole to 2Mil Pitch Surface Mount.
The CF-9 Radial Lead Former forms and cuts 2- and 3-leaded taped radial components such as TO-92s, capacitors, transistors, LEDs, etc. - precisely and repeatedly, in standard and special forms. This machine is capable of forming and cutting up to 25
Full-featured and compact benchtop dispense system robot offering accurate and repeatable dispense results! A benchtop dispense system does not mean "no features". The Catalina benchtop dispense system is a full-featured platform with these standard
Electronics Forum | Tue Dec 16 06:59:47 EST 2008 | janz
Hello, I am looking for technical papers (tips, tricks. machines, materials etc) for MID assembly (Moulded Interconnect Device - 3D assembly). Regards Janz
Electronics Forum | Mon Apr 13 18:18:31 EDT 2020 | wbrenner
Does any one have a general cost percent going from class 2 to class 3 for the same Assembly.. Or, general up charge percent when biding class 2 vs class 3?
Used SMT Equipment | AOI / Automated Optical Inspection
Capture on the fly technology 3D Fusion Lighting (RGB+White LED's) 5 megapixel color imaging 2 top-down and 4 side angle cameras Quick set-up High speed, high defect coverage Low false failure rate Programmable conveyor for boards up to 20 x 2
Used SMT Equipment | AOI / Automated Optical Inspection
This 2015 Nordson YESTECH FX-940 Ultra 3D AOI is available for immediate purchase. For more information, please contact ashlin@bajabid.com
Industry News | 2014-09-06 19:18:17.0
Briefing Co-hosted by IPC as Part of Continuing Effort to Connect IPC Members with Policymakers.
Industry News | 2017-09-16 02:29:39.0
Heller Industries has been awarded the 2017 Global Frost & Sullivan Company of the Year Award for its surface mount technology (SMT) soldering equipment that enables Industry 4.0. - the automation and data exchange in manufacturing technologies.
..2.jpg)
Parts & Supplies | SMT Equipment
Universal Spindle assembly (49498805) KH4-M9166-00X YAMAHA Air cylinder KHY-M7153-00X YAMAHA Solenoid valve JA10AA-21W KM1-M7162-10X YAMAHA YV100X/XG/II Solenoid valve A040E1-56W KM1-M7162-11X YAMAHA YV100TT Solenoid valve A040E1-54W KM1-M7162
..3.jpg)
Parts & Supplies | SMT Equipment
Universal Spindle assembly Part Number : 49498805 More SMT parts in stock H1332A VQ1201-5 FUJI DC24V Solenoid valve H3006A FU-42 optical fiber H3009A EP4-321 CP6 HOKUYO optical fiber H10661 FUJI F15T4-F4-PL3-DC24V Solenoid valve H10697 PCD2
Technical Library | 2019-07-10 23:36:14.0
Pockets of gas, or voids, trapped in the solder interface between discrete power management devices and circuit assemblies are, unfortunately, excellent insulators, or barriers to thermal conductivity. This resistance to heat flow reduces the electrical efficiency of these devices, reducing battery life and expected functional life time of electronic assemblies. There is also a corresponding increase in current density (as the area for current conduction is reduced) that generates additional heat, further leading to performance degradation.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
http://www.gpd-global.com No drip no drool across a wide range of fluid viscosities (low-to-mid and low-to-high). No manual adjustment to compensate for pump variability. Truly Volumetric PCD Pumps for total control of dispensing fluids. Ability to
http://www.gpd-global.com Tilt-and-Rotate configuration is available. Full featured programming makes conformal coating processes quick and easy. 3-axis Conformal Coating System for printed circuit boards that provides a reliable robotic platform f
Training Courses | | | IPC-A-610 Specialist (CIS) Recert.
The Certified IPC-A-610 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC-A-610 Specialists.
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Events Calendar | Tue Oct 13 00:00:00 EDT 2020 - Thu Oct 15 00:00:00 EDT 2020 | San Jose, California USA
International Wafer-Level Packaging Conference (IWLPC)
Career Center | Norcross, Georgia USA | Production,Quality Control
Reports to: Quality Manager Introduction: I Tech e-Services is actively seeking a Quality Control Technician with at least 3 years of experience to join our fast growing team. We are looking for someone who is flexible and willing to learn new skil
Career Center | Oldsmar, Florida USA | Engineering,Production,Quality Control
Provide manufacturing engineering support to the build of circuit card assemblies as a contributing member of an integrated product team (IPT). Provide day-to-day support to manufacturing operations to ensure quality, cost and schedule goals are
Career Center | Mumbai, India | Maintenance,Management,Production,Technical Support
SMT Manufacturing, MYDATA/ Mycronic Machine Experience, SMT Production Execution, SMT Machine Maintainance Planning & Execution
Career Center | rawalpindi, Pakistan | Production
Handling the production line including two SWISS pick and place machines cobra and paraquda ,tucano printer reflow oven ,samsung loader and unloader.Hand on experience with 3D camera inspection system and solder paste height measuring instrument and
SMTnet Express, March 26, 2020, Subscribers: 35,188, Companies: 10,983, Users: 25,722 New High-Speed 3D Surface Imaging Technology in Electronics Manufacturing Applications Credits: FocalSpec, Inc. This paper introduces line confocal technology
The Industry Requirement for 2D and 3D Inspection Technology in a Single AOI Platform SMTnet Express November 21, 2012, Subscribers: 26000, Members: Companies: 9045, Users: 33968 The Industry Requirement for 2D and 3D Inspection Technology in a
| https://pcbasupplies.com/mydata-board-lock-arm/
Count On Tools D-025-0211B-3 Login Create Account Contact View My Cart Menu × Categories Hand Soldering & Rework Automation Tooling PCB Support Systems Soldering Robots Material Handling Dry Storage Cabinets Component Handling Selective Solder Nozzles Pick
Heller Industries Inc. | https://hellerindustries.com/parts/463146/
463146 - EHC CHAIN W/D-3 Attachment, 3.7mm PIN - (METER) Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
Golden State is a contract manufacturer that makes wire harnesses, electromechanical assemblies (box builds, subassemblies, PCBAs, kits, etc.) and services (sorting, rework, value additive manufacturing engineering)
18220 Butterfield Blvd
Morgan Hill, CA USA
Phone: 5102268155
