Industry Directory | Consultant / Service Provider / Manufacturer
Providing Belting/Sequencing Tape for Electronics Industry,bandoliering tape 6mm*3000m,thermal melting tape,active and passive component processing,axial taping and radial lead forming for capacitor,LED diode .sales2@chinatape.com
Industry Directory | Distributor / Manufacturer
We are a fabricator / distributor of tapes, labels and gaskets used for high temperature masking (Kapton), conformal coating, emi/rfi shielding, thermal management and high temperature thermal transfer printable labels.
New Equipment | Curing Equipment
A Pressure Cure Oven (PCO), or Autoclave, is used to minimize voiding and increase adhesion strength for bonding processes typically used in die attach and underfill applications. PCO pressurizes air into a rigid vessel and heats & cools with
New Equipment | Fabrication Services
Aluminum PCB & Metal Core PCB & LED PCB Circuit board Aluminium PCB are metal-based, copper-clad laminates with a good heat dissipation function. Usually, Aluminium PCB is refer to LED PCB board, which is the most important part of LED display and l
Electronics Forum | Fri Jan 09 23:53:48 EST 2004 | Dean
How high are we talking? 1000 Celsius? KIC Thermal Profiling double sided aluminum profiling tape. I have used at an extreme application of 240 to 300 degrees celsius for 18 minutes. With up to 30 passes with no visible degree of deterioration.
Electronics Forum | Wed Feb 15 14:03:25 EST 2006 | samir
Robert McKeown Company makes thermally conduct Al tape. KIC did a study on which method (Kapton Tape, Aluminum Tape, Hi-Temp Solder) is the most repeatable. The study can be found in their website: http://www.kicthermal.com Al Tape placed 2nd, and
Used SMT Equipment | SMT Equipment
Product Name :Panasoinc NPM module Product number: two modules NPM Detailed product introduction 2D inspection head function of NPM tape coating machine: 1, NPM check head resolution: 9 m 2, NPM check head vision: 21.1 * 17.6mm 3, check proc
Used SMT Equipment | SMT Equipment
Product Name :Panasoinc NPM module Product number: two modules NPM Detailed product introduction 2D inspection head function of NPM tape coating machine: 1, NPM check head resolution: 9 m 2, NPM check head vision: 21.1 * 17.6mm 3, check proc
Industry News | 2016-06-27 14:59:09.0
GPD Global introduces the NEW TempView Thermal Imaging System that ensures the success of heated dispensing processes like Underfill, Encapsulations, Dam and Fill, and more. The TempView Thermal Imaging System monitors the temperature of the entire substrate for complete heat profile characterization. Regions of the product may be selected for monitoring during the heating process. Now you can accurately monitor temperature of specific devices to be sure they are up to temperature before starting a process.
Industry News | 2010-12-07 14:53:07.0
GPD Global announces that its Positive Cavity Displacement (PCD) technology is proven with silver-filled electrically and thermally conductive adhesives.
Parts & Supplies | Pick and Place/Feeders
GFC-S0202 SAMSUNG SM Feeder Storage Cart The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling. When its time to change over to the next job, the c
Parts & Supplies | Pick and Place/Feeders
GFC-S0202 SAMSUNG SM Feeder Storage Cart GFC-S0202 SAMSUNG SM Feeder Storage Cart The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling. When its
Technical Library | 2020-10-14 14:33:36.0
Epoxy based adhesives are prevalent interface materials for all levels of electronic packaging. One reason for their widespread success is their ability to accept fillers. Fillers allow the adhesive formulator to tailor the electrical and thermal properties of a given epoxy. Silver flake allow the adhesive to be both electrically conductive and thermally conductive. For potting applications, heat sinking, and general encapsulation where high electrical isolation is required, aluminum oxide has been the filler of choice. Today, advanced Boron Nitride filled epoxies challenge alternative thermal interface materials like silicones, greases, tapes, or pads. The paper discusses key attributes for designing and formulating advanced thermally conductive epoxies. Comparisons to other common fillers used in packaging are made. The filler size, shape and distribution, as well as concentration in the resin, will determine the adhesive viscosity and rheology. Correlation's between Thermal Resistance calculations and adhesive viscosity are made. Examples are shown that determination of thermal conductivity values in "bulk" form, do not translate into actual package thermal resistance. Four commercially available thermally conductive adhesives were obtained for the study. Adhesives were screened by shear strength measurements, Thermal Cycling ( -55 °C to 125 °C ) Resistance, and damp heat ( 85 °C / 85 %RH ) resistance. The results indicate that low modulus Boron Nitride filled epoxies are superior in formulation and design. Careful selection of stress relief agents, filler morphology, and concentration levels are critical choices the skilled formulator must make. The advantages and limitations of each are discussed and demonstrated.
Technical Library | 2020-07-29 19:58:48.0
The majority of flexible circuits are made by patterning copper metal that is laminated to a flexible substrate, which is usually polyimide film of varying thickness. An increasingly popular method to meet the need for lower cost circuitry is the use of aluminum on Polyester (Al-PET) substrates. This material is gaining popularity and has found wide use in RFID tags, low cost LED lighting and other single-layer circuits. However, both aluminum and PET have their own constraints and require special processing to make finished circuits. Aluminum is not easy to solder components to at low temperatures and PET cannot withstand high temperatures. Soldering to these materials requires either an additional surface treatment or the use of conductive epoxy to attach components. Surface treatment of aluminum includes the likes of Electroless Nickel Immersion Gold plating (ENIG), which is extensive wet-chemistry and cost-prohibitive for mass adoption. Conductive adhesives, including Anisotropic Conductive Paste (ACP), are another alternate to soldering components. These result in component substrate interfaces that are inferior to conventional solders in terms of performance and reliability. An advanced surface treatment technology will be presented that addresses all these constraints. Once applied on Aluminum surfaces using conventional printing techniques such as screen, stencil, etc., it is cured thermally in a convection oven at low temperatures. This surface treatment is non-conductive. To attach a component, a solder bump on the component or solder printed on the treated pad is needed before placing the component. The Aluminum circuit will pass through a reflow oven, as is commonly done in PCB manufacturing. This allows for the formation of a true metal to metal bond between the solder and the aluminum on the pads. This process paves the way for large scale, low cost manufacturing of Al-PET circuits. We will also discuss details of the process used to make functional aluminum circuits, study the resultant solder-aluminum bond, shear results and SEM/ EDS analysis.
General curing, die attach curing, underfill curing, film & tape bonding, wafer laminating.
http://www.gpd-global.com GPD Global expands the performance of its automated dispense systems to run fundamental Pick & Place operations. The same automated fluid dispensing machine is capable of dispensing fluids and also Pick & Place simple compo
Events Calendar | Wed Apr 19 00:00:00 EDT 2017 - Fri Apr 21 00:00:00 EDT 2017 | Nara, Japan
Ceramic Interconnect and Ceramic Microsystems Technologies (CICMT 2017)
International Microelectronics Assembly and Packaging Society (IMAPS)
Career Center | Stoneham, Massachusetts | Engineering,Production,Research and Development,Technical Support
Warren P. Pumyea 8 Beacon Street Stoneham, Massachusetts 02180 Cell #: 978-821-7335 * E-mail: warren@pumyea.com http://www.pumyea.com/Process_Manufacturing_Engineer.doc Objective: Seeking a position as an engineer or related discipline whic
Career Center | Shen Zhen, China | Management,Sales/Marketing
Working in GLORYPCB for 10 years.knowing electronic supply chain very well. especially for PCB PCBA assembly and other Electronic Manufacturing Service.Glorypcb is a professional electronic manufacturer located in Shenzhen with three facilities.offe
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/products/thermal-compounds?con=t&page=32
Thermal Interface Materials (TIM) | Thermal Compound | Nordson EFD Nordson EFD Corporate | Global Directory | Languages Division Only All of Nordson Home Products Accessories
GPD Global | https://www.gpd-global.com/heated-dispensing-thermal-imaging.php
Heated Dispensing Thermal Imaging Home Products Fluid Dispensing Equipment High Precision Dispenser - MAX Series Large Format Board Dispensing - DS Series Table Top Dispensing Equipment Loader
