Industry Directory | Other / Consultant / Service Provider / Manufacturer
ScanCAD is an industry leader in inspection, measurement, process control and reverse engineering. Our solutions support OEM's, manufacturers, stencil fabricators, repair depots, and others in optimizing quality and yield.
New Equipment | Solder Paste Stencils
Miniature SMT Rework Stencils are laser cut solder paste stencils designed to replicate the intial manufacturing process albeit for a designated component or select area. These laser cut mini stencils can either have flaps (to prevent neighboring are
New Equipment | Solder Paste Stencils
Flip Up SMT Rework Stencils are laser cut solder paste stencils designed to replicate the intial manufacturing process albeit for a designated component or selected area. These laser cut mini stencils can either have flaps (to prevent neighboring are
.JPG)
Used SMT Equipment | SPI / Solder Paste Inspection
The LSM300 follows the successful Laser section Microscopes LSM and LSM2. This new non-contact laser based system is an off-Line solder paste inspection system.LSM300 provides automatic height measurements, eliminating the inconsistencies of manual m
Used SMT Equipment | AOI / Automated Optical Inspection
This AOI was purchased for $49,995 from Manncorp. The Sherlock AOI is in excellent condition and has under 200 hours of usage. The Sherlock AOI Systems detect a comprehensive range of defects and errors in PCB assembly using the Sherlock PCB ins
Industry News | 2014-01-17 12:52:25.0
BEST Inc., has developed a line of Kapton™ SMT stencils for the prototype assembly market. These stencils, available in 4,5 and 6 thicknesses, present very flat coplanar printing surfaces for solder paste printing. . They are designed to be used when the there are very few boards to be made at one time and the pitch of the components is 1.00 and above.
Industry News | 2018-10-18 08:40:47.0
Stencil aperture considerations for QFN chips
Technical Library | 2015-08-25 13:51:27.0
The stencil printing process is one of the most critical processes in the electronic production. Due to the requirement: "faster and smaller" it is necessary to place components with different paste volume close together without regard to solder paste printing. In our days it is no longer possible to control the solder paste volume only by adjustment of the aperture dimensions. The requirements of solder paste volumes for specific components are realized by different thicknesses of metal sheets in one stencil with so called step stencils. The step-down stencil is required when it is desirable to print fine-pitch devices using a thinner stencil foil, but print other devices using a thicker stencil foil. The paper presents the innovative technology of step-up and step-down stencils in a laser cutting and laser welding process. The step-up/step-down stencil is a special development for the adjustment of solder paste quantity, fulfilling the needs of placement and soldering. This includes the laser cutting and laser welding process as well as the resulting stencil characteristics and the potential of the printing process.
This is video shows how to print a PCB using a prototype foil only stencil. The SMT prototype stencil (www.soldertools.net) is made from a high nickel content material able to offer repeatable high precision apertures. The steps of alignment, printin
LSMO-105 fastest and most reliable stencil inspection machine www.aoivision.com
Career Center | Puducheery, Tamil nadu India | Production
________________________________________V. KIRUBAKARAN SMT Production Engineer Mobile: +918925842383 | E-Mail: gvkirubakaran@gmail.com Passport Number: M6034648 | Issued date: 05 February 2015 | Expiry date: 05 February 2015 ___________________
Career Center | Sparks, Nevada USA | Engineering,Management,Production
Felix Gutierrez Bueno 3906 Dominus Drive, Sparks. NV. 89436 Cel: 775-313-2975 felix.gutierrez23@yahoo.com *SMT Manager * Sr. SMT Process Engineer * Manufacturing Engineer * Maintenance and repair Supervisor * Background Broad Experience serving as:
Process Development And Characterization Of The Stencil Printing Process For Small Apertures Process Development And Characterization Of The Stencil Printing Process For Small Apertures. The consumer’s interest for smaller, lighter and higher
GPD Global | https://www.gpd-global.com/pdf/doc/Dispense-System-Service-Guide-22290008G.pdf
. • Weight specification updated for DS Series. Improvements • Content removed for legacy models DS9000 and DS9100. • Legacy front panel controls removed from DS Series images
| http://www.thebranfordgroup.com/dnn3/Auctions/RecentAuctions.aspx
] SOLD - Auction Closed on 8/31/2022 Branson & Dukane Ultrasonic Welders! 2nd in a Series – Incredible Opportunity 2,500-Watt to 4,000-Watt Welders Available New in 2020 and Prepped for Shipping Tempe, AZ Aperture Solutions & Pues LLC [Online] SOLD
