KSUN R05 JUKI Feeder Calibration It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in order to investigate precisely and repair the error of device pos
2.0 Cpk @ +/- 12.5µm, (±6 Sigma) * Process Alignment Capability >2.0 Cpk @ +/- 25µm, (±6 Sigma) * Standard cycle time 10 seconds + process Maximum printing surface 508 mm (X) × 508 mm (Y) User interface Touchscreen, keyboard a
Electronics Forum | Thu Jul 31 07:28:04 EDT 2008 | leemeyer
This sounds like a Quadalign problem. Upon startup the Quadalign system checks runout of the Z-rod and tries to find the tip of the nozzle. It will keep lowering the Z-rod and looking for the tip until it hits it's limit. Check and see if the Quadali
Electronics Forum | Mon Aug 04 04:58:23 EDT 2008 | stiva
Hi Sound like the same problem that i had. The machine after it had warmed up when initialising would drive the z rod down with the quadalign on checking for the nozzle height (I think). To me it seemed like an overheating problem as after allowin
Used SMT Equipment | Pick and Place/Feeders
Detailed Product Description 1. The acquisition for the rectangular coordinate of X-Y direction. 2. Check for the existence, transformation, user in the feeder 3. The installation is to euip it with actual device and consolidation in feeder base
Used SMT Equipment | Pick and Place/Feeders
Board size L50xW50mm – L460 xW410mm Board thickness 0.5mm-2.0mm Flow direction Left to right Conveyor speed Max. 420mm/sec, speed variable, soft stop fuction Placement speed A (NB1) 0.13 sec/CHIP, 0.38 sec/TSOP32 Placement speed B
Industry News | 2018-09-06 12:12:07.0
GPD Global offers the ideal tabletop robots (Catalina Series) for precision dispensing.
Industry News | 2015-07-08 14:20:26.0
Nordson ASYMTEK, a Nordson company (NASDAQ: NDSN), a global leader in dispensing, jetting, and coating equipment and technologies, announces its new Programmable Tilt + Rotate 5-Axis Fluid Dispenser that enables the jet to dispense using 5 axes of automated control instead of only 3 axes. The additional X and Y tilt modes enable dispensing from a vertical position and at varying tilt angles along all four sides of a device and up the side of a substrate or component, especially for 3D packages, while meeting stringent requirements for precision, accuracy, and speed. It enables dispensing of underfill, encapsulant, and coating fluids around tall substrate components on PCBs, flexible circuits, and in densely populated boards; provides precision fluid delivery to multiple sides of the latest-generation mobile device cases and sub-component camera modules by moving the nozzle tip closer to a target location such as a vertical wall; and dispenses into tight corners and narrow gaps in advanced packages.
Parts & Supplies | Pick and Place/Feeders
GIC-F01 FUJI NXT Feeder Calibration JIG It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in order to investigate precisely and repair the error of
Parts & Supplies | Pick and Place/Feeders
GIC-Y01 YAMAHA Feeder Calibration JIG It is essential for this equipment that enhanced productivity , installation and quality improvement As the high efficiency vision camera is asked in order to investigate precisely and repair the error of de
Technical Library | 2020-04-01 05:52:59.0
Recently, our engineer Peter went to Thailand to provide after-sales support for our customer. In these days, we had installed a SC-900 selective coating line . Moreover, Peter gave patience and meticulous training to their staff, make sure they master the machine usage .Customer and agent are satisfied with our support and give their affirmation to us. SC-900 is a high Performance 4 axis Selective Coating Machine ,which is equipped with high precision servo control system , various valves , CCD system ,material tank weight detecting system etc, which can provide a high efficiency conformal coating process .The maximum coating size can reach 400mm*450mm with SC-900. So far, we've installed several dozen conformal coating line all over the world. It have excellent stability and performance. Check below link to get more info!
Technical Library | 2024-04-29 21:39:52.0
In this paper, we develop and put into practice an Automatic Optical Inspection (AOI) system based on machine vision to check the holes on a printed circuit board (PCB). We incorporate the hardware and software. For the hardware part, we combine a PC, the three-axis positioning system, a lighting device and CCD cameras. For the software part, we utilize image registration, image segmentation, drill numbering, drill contrast, and defect displays to achieve this system. Results indicated that an accuracy of 5µm could be achieved in errors of the PCB holes allowing comparisons to be made. This is significant in inspecting the missing, the multi-hole and the incorrect location of the holes. However, previous work only focusses on one or other feature of the holes. Our research is able to assess multiple features: missing holes, incorrectly located holes and excessive holes. Equally, our results could be displayed as a bar chart and target plot. This has not been achieved before. These displays help users analyze the causes of errors and immediately correct the problems. Additionally, this AOI system is valuable for checking a large number of holes and finding out the defective ones on a PCB. Meanwhile, we apply a 0.1mm image resolution which is better than others used in industry. We set a detecting standard based on 2mm diameter of circles to diagnose the quality of the holes within 10 seconds.
350x400mm Dual Table High-speed Four-axis Visual PCB Router Milling Cutter PCB Router Machine Features: This system has two-slide tables for high volume production. And it has lower stress to protect PCBA to ensure smooth cutting edge. Imported m
PCBA CNC Router Machine Automatic PCB Milling Machine PCBA CNC Router Machine Advantages: X10 zoom-in image makes programming easier&increase the accuracy of point setting. 2 sliding tables provide simultaneously in-and-out movement to reduce th
Career Center | cabuyao, Philippines | Engineering
I had 9 years working as a technician starting in Smart electronic)as Mainline Technician. SGIC(Sanritsu Great International Corporation) as SMT mainline Techinician and IMI (Integrated Micro-Electronics INC,)as SMT Process Technician.
Career Center | Bangalore, India | Engineering,Management,Production,Quality Control,Technical Support
WORK EXPERIENCE DETAILS: 7+ Years of Experience in manufacturing & hardware testing of Protocol conveter & Commissioning, Products delivery and QA/QC. 2+ Years of Experience in Hardware testing and Package Level testing. 2+ Years of Experience in
| https://www.feedersupplier.com/sale-13926852-asm-siemens-siplace-y-axis-belt-00337389-smt-machine-belt-toothed-belt-y-axis.html
ASM SIEMENS SIPLACE Y-axis Belt 00337389 SMT Machine Belt Toothed Belt Y-AXIS Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
ASCEN Technology | https://www.ascen.ltd/Blog/machine/Conformal_coating_machine/983.html
Multi-axis conformal coating machine to your production process,please check here High Performance Conformal Coating processing solution list for PCB spray
