Industry Directory | Manufacturer
Hitechpcba is a wоrld-lеаding PCB Manufacturing & PCB Assembly company with more than 20 years experience in the electronics manufacturing industry. We focus on Circuit board fabrication, PCB assembly, electronic parts sourcing.
Industry Directory | Manufacturer
Multilay,HDI,thick copper and Aluminium boards'supplier
ASCEN-620 Depaneling machine for separating aluminium panel-FR4/CEM-1 The more detail and video please check the link: www.pcb-separator.com For more than 10 years our PCB depaneling machines are developed and improved continuously, in orde
New Equipment | Fabrication Services
Aluminum PCB, or Aluminium PCB, also called Alu PCB, is one of Insulated Metal Substrate (IMS) PCBs, and is also one of the most commonly used Metal Core PCBs (MCPCB) nowadays. HitechPCB manufactures Aluminum printed circuit boards (PCB) with a full
Electronics Forum | Sun Mar 20 14:47:29 EDT 2011 | floydf
We are going to be placing BGAs for the first time, and I have some questions. Is it recommended top bake all of the boards and all of the BGAs before production? I have had good luck baking boards that didn't wave solder well. It usually turns out
Electronics Forum | Fri Oct 04 11:34:42 EDT 2002 | Bob Willis
Some additional comments from a paper may be of interest. Baking Printed Circuit Boards - Why and How Baking printed boards prior to conventional and surface mount assembly should not be necessary. Often boards are baked for historical reasons; in
Used SMT Equipment | SMT Equipment
Baking SMT on a cheap kitchen toaster oven is not difficult. You just need some patience and exploration good will. In this page you will read the manual procedure to bake SMD boards into a regular kitchen toaster oven appliance. Follows information
Used SMT Equipment | Circuit Board Assembly Products
Lowest stress, no dust, no sundries on the fringe of PCB, Especialy for separate the aluminium PCB. Description: The SM-3000 type depanning machines were designed to depanerlize prescored panelboards carefully without bending or tension stress, ev
Industry News | 2024-09-18 14:19:59.0
Make sure you head over to the catalog and place your best and final bids ASAP!
Industry News | 2010-09-13 15:36:15.0
IPC — Association Connecting Electronics Industries® has released IPC-1601, Printed Board Handling and Storage Guidelines. The industry's sole standard on the handling, packaging and storage of printed boards, IPC-1601 provides users with guidance on how to protect printed boards from contamination, physical damage, solderability degradation, electrostatic discharge and moisture uptake.
Parts & Supplies | SMT Equipment
USE ALTENATIVE PART > u FUJI S5120A SWITCH PHOTO FUJI S5124A SWITCH PHOTO FUJI S5125A SWITCH PHOTO FUJI S5126A SWITCH PHOTO FUJI S5128A SWITCH PHOTO FUJI S5129A SWITCH PHOTO FUJI S5133A SWITCH PHOTO FUJI S5134A SWITCH PHOTO FUJI S51
Parts & Supplies | Pick and Place/Feeders
USE ALTENATIVE PART > u FUJI S5120A SWITCH PHOTO FUJI S5124A SWITCH PHOTO FUJI S5125A SWITCH PHOTO FUJI S5126A SWITCH PHOTO FUJI S5128A SWITCH PHOTO FUJI S5129A SWITCH PHOTO FUJI S5133A SWITCH PHOTO FUJI S5134A SWITCH PHOTO FUJI S5135A SWITCH PHOTO F
Technical Library | 2023-11-14 19:24:08.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations.
Technical Library | 2021-09-29 13:35:21.0
In PCB circuit assemblies the trend is moving to more SMD components with finer pitch connections. The majority of the assemblies still have a small amount of through hole (THT) components. Some of them can't withstand high reflow temperatures, while others are there because of their mechanical robustness. In automotive applications these THT components are also present. Many products for cars, including steering units, radio and navigation, and air compressors also use THT technology to connect board-to-board, PCB's to metal shields or housings out of plastic or even aluminium. This is not a simple 2D plain soldering technology, as it requires handling, efficient thermal heating and handling of heavy (up to 10 kg) parts. Soldering technology becomes more 3D where connections have to be made on different levels. For this technology robots using solder wire fail because of the spattering of the flux in the wires and the long cycle time. In wave soldering using pallets the wave height is limited and pin in paste reflow is only a 2D application with space limitations. Selective soldering using dedicated plates with nozzles on the solder area is the preferred way to make these connections. All joints can be soldered in one dip resulting in short cycle times. Additional soldering on a small select nozzle can make the system even more flexible. The soldering can only be successful when there is enough thermal heat in the assembly before the solder touches the board. A forced convection preheat is a must for many applications to bring enough heat into the metal and board materials. The challenge in a dip soldering process is to get a sufficient hole fill without bridging and minimize the number of solder balls. A new cover was designed to improve the nitrogen environment. Reducing oxygen levels benefits the wetting, but increases the risk for solder balling. Previous investigations showed that solder balling can be minimized by selecting proper materials for solder resist and flux.
http://www.pcb-separator.com/ Nutzentrennmaschine/Nutzentrenner/PCB depaneling machine ASCEN-620 NSL zum Trennen von Aluminium Leiterplatten/FR4
http://www.pcb-separator.com/ Nutzentrennmaschine/Nutzentrenner/PCB depaneling machine ASCEN-620 NSL zum Trennen von Aluminium Leiterplatten/FR4
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Career Center | Theni, Tamilnadu India | Engineering
NPI Engineer: • Playing a role as NPI leader of the Telecom, Aerospace & Server Products to introduce and run to qualify the engineering build from customer. • Conducting Weekly NPI meeting with the CFT team to review the progress of the NPI schedu
| https://www.eptac.com/faqs/ask-helena-leo/ask/silver-immersion-finish-boards
. We understand the need for baking to remove moisture. Comments? Answer: Baking the boards may or may not be necessary depending upon how they were stored and whether or not they were multilayer boards
Imagineering, Inc. | https://www.pcbnet.com/services/assembly/turn-key/
. With bare boards, components and assembly labor under one roof, we’re able to give you aerospace quality at standard prices. AOI (Automated Optical Inspection
