Electronics Forum | Tue Mar 03 03:31:07 EST 2015 | vb7007
Hi We are trying to Solder LCD Flex to PCB. Few suggested Z-Axis Film (Conductive tape) which can be stuck between Flex-PCB and bonding by applying hot soldering iron across the flex. Is this effective method. If there is any other option, please su
Electronics Forum | Tue Mar 03 09:37:54 EST 2015 | capse
Hot bar soldering or hot bar bonding with ACF is widely used for your applications. A company I represent can assist you; Fancort Industries.
Industry News | 2018-10-18 09:02:41.0
How to Solder a Surface Mount Device to a PCB Pad
Industry News | 2018-10-18 08:21:10.0
How to Prevent Non-Wetting Defect during the SMT Reflow Process
Technical Library | 2016-01-12 11:03:35.0
With the pitch size of interconnect getting finer and finer, the bonding strength between flexible and rigid (e.g. PCB, ceramic) substrates becomes a serious issue because it is not strong enough to meet the customer’s requirement. Capillary underfill has been used to enhance the bonding strength between flexible and rigid substrates, but the enhancement is very limited, particularly for high temperature application. The bonding strength of underfilled flexible/rigid interconnect is dramatically decreased after being used at 180◦C, and the interconnects are weakened by the internal stress caused by the expansion of underfill at high temperatures. In order to resolve reliability issues of the interconnect between flexible/rigid substrates, solder joint encapsulant was implemented into the thermal compression bonding process, which was used to manufacture the interconnect between flexible/rigid substrates. Compared to the traditional process, the strength of the interconnect was doubled and the reliability was significantly improved in high temperature application.
Technical Library | 2020-08-27 01:22:45.0
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. The nodules and scratches were not defined by measurable dimensions and were considered to be unacceptable if there was any sign of a visual blemish on wire-bondable features. Analysis of the yield at a PCB manufacturer monitored monthly for over two years indicated that the target yield could not be achieved, and the main reasons for yield loss were due to nodules and scratches on the wirebonding pads. The PCB manufacturer attempted to eliminate nodules and scratches. First, a light-scrubbing step was added after electroless copper plating to remove any co-deposited fine particles that acted as a seed for nodules at the time of copper plating. Then, the electrolytic copper plating tank was emptied, fully cleaned, and filtered to eliminate the possibility of co-deposited particles in the electroplating process. Both actions greatly reduced the density of the nodules but did not fully eliminate them. Even though there was only one nodule on any wire-bonding pad, the board was still considered a reject. To reduce scratches on wirebonding pads, the PCB manufacturer utilized foam trays after routing the boards so that they did not make direct contact with other boards. This action significantly reduced the scratches on wire-bonding pads, even though some isolated scratches still appeared from time to time, which caused the boards to be rejected. Even with these significant improvements, the target yield remained unachievable. Another approach was then taken to consider if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful. A gold ball bonding process called either stand-off-stitch bonding (SSB) or ball-stitch-on-ball bonding (BSOB) was used to determine the effects of nodules and scratches on wire bonds. The dimension of nodules, including height, and the size of scratches, including width, were measured before wire bonding. Wire bonding was then performed directly on various sizes of nodules and scratches on the bonding pad, and the evaluation of wire bonds was conducted using wire pull tests before and after reliability testing. Based on the results of the wire-bonding evaluation, the internal specification for nodules and scratches for wirebondable PCBs was modified to allow nodules and scratches with a certain height and a width limitation compared to initially adopted internal specifications of no nodules and no scratches. Such an approach resulted in improved yield at the PCB manufacturer.
Successfully Designing FPGA-Based Systems SMTnet Express March 15, 2012, Subscribers: 25003, Members: Companies: 8826, Users: 32832 Successfully Designing FPGA-Based Systems by: Nagesh Gupta; Cadence Design Systems, Inc. Increases in field
| pcb-services-inc.com&gigaurl=https://precision-pcb-services-inc.com/products/copy-of-qge7520mcsl8ee-1" target="_blank">https://precision-pcb-services-inc.com/products/copy-of-qge7520mcsl8ee-1
. Home Catalog Blog About us Home › XC6VLX365T XC6VLX365T $4,500.00 Default Title - $4,500.00 USD Quantity Add to Cart New Xilinx FPGA XC6VLX365T-FFG1759AGW1249 The BGA has Lead Free Solder Balls, We can install lead solder balls if you require these
| https://www.smtfactory.com/PCBA-Cleaning-Machine-PCB-Defluxing-For-Best-Coating-and-Bonding-Effect-id43566387.html
PCBA Cleaning Machine / PCB Defluxing -For Best Coating and Bonding Effect - I.C.T SMT Machine English Bahasa indonesia Сербия Česky Dansk Deutsch
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
