New Equipment | Test Equipment
Inline Dual Track 3D SPI, Double track solder paste inspection mail:sales@smtlinemachine.com whatapp/wechat:+8615915451009 Specification: 技术平台/Technology Platform Dual conveyor Type-B/C 适用系列/Series S serials 型号M
Chip assembly? Classic SMT placement? Our SIPLACE CA can do both. The SIPLACE CA is the world's first placement platform that combines bare-die placement directly from the wafer and classic SMT placement in a single machine and a single production
Electronics Forum | Mon Jun 29 15:10:10 EDT 2020 | spoiltforchoice
I would specifically look at the FLX2011 models with a V for vision (they otherwise come with Cyberoptics laser alignment as standard, although that would also work if you are not inspecting BGA balls). They come with software that I think is called
Electronics Forum | Thu Jun 18 23:24:12 EDT 2020 | jmelson
About 12 years ago, this forum was hugely helpful in guiding me to get a Philips CSM84, with no vision. (That might have been a mistake.) Now, I'm moving to smaller parts, especially TSSOP and QFP with 0.5 mm pitch, and the CSM just isn't accurate
Used SMT Equipment | Pick and Place/Feeders
DEK 03IX automatic solder paste printing machine features advanced up/down k-view vision system, independent control and adjustment of lighting, high-speed moving lens, accurate alignment of PCB PCB and net board. The DEK Horizon 03IX automatic solde
.JPG)
Used SMT Equipment | Pick and Place/Feeders
Yamaha YSM10 Pick And Place Machine Features: YSM series entry model mounter that achieved both the world’s fastest speed and versatility in its class worldwide! Ultimate basic machine featuring the three “1
Industry News | 2016-05-02 19:28:57.0
Count On Tools is offering special introductory pricing on all MYDATA Feeder Repair Kits, effective immediately through July 31, 2016.
Industry News | 2016-09-01 19:49:29.0
Count On Tools today announced that it has extended the special introductory pricing on all MYDATA Feeder Repair Kits through the remainder of the year. The special pricing began in May and will be effective through December 31, 2016.
_1.jpg)
Parts & Supplies | Pick and Place/Feeders
Single pendulum on JUKI FF 16MM feeder wheel 40001982 OCC A LIGHT PCB ASM 40002065 Y-AXIS LMT CABLE ASM 40002066 X-AXIS LMT CABLE ASM 40002068 YL LMT SENSOR ASM 40002069 +YL LMT SENSOR(TRAY)ASM 40002070 +YL LMT SENSOR(FEEDER)A 40002072 HEAD
Parts & Supplies | Pick and Place/Feeders
ff8mm-56mm feeder original new used in stock olther parts we supply: Long-term supply JUKI KE700 KE2000 FX-1R KJ-01 KE2070 / 2080 / FX-3 series machine board, laser, motor and other accessories: JUKI 2050 2060 XMP card XMP-SynqNet-CPCI-Dual P /
Technical Library | 2014-05-15 14:26:27.0
350mA). Slotted surface showed good performance on both thermal and optical properties of the given 3W green LED.
Technical Library | 2020-08-27 01:22:45.0
Initially adopted internal specifications for acceptance of printed circuit boards (PCBs) used for wire bonding was that there were no nodules or scratches allowed on the wirebond pads when inspected under 20X magnification. The nodules and scratches were not defined by measurable dimensions and were considered to be unacceptable if there was any sign of a visual blemish on wire-bondable features. Analysis of the yield at a PCB manufacturer monitored monthly for over two years indicated that the target yield could not be achieved, and the main reasons for yield loss were due to nodules and scratches on the wirebonding pads. The PCB manufacturer attempted to eliminate nodules and scratches. First, a light-scrubbing step was added after electroless copper plating to remove any co-deposited fine particles that acted as a seed for nodules at the time of copper plating. Then, the electrolytic copper plating tank was emptied, fully cleaned, and filtered to eliminate the possibility of co-deposited particles in the electroplating process. Both actions greatly reduced the density of the nodules but did not fully eliminate them. Even though there was only one nodule on any wire-bonding pad, the board was still considered a reject. To reduce scratches on wirebonding pads, the PCB manufacturer utilized foam trays after routing the boards so that they did not make direct contact with other boards. This action significantly reduced the scratches on wire-bonding pads, even though some isolated scratches still appeared from time to time, which caused the boards to be rejected. Even with these significant improvements, the target yield remained unachievable. Another approach was then taken to consider if wire bonding could be successfully performed over nodules and scratches and if there was a dimensional threshold where wire bonding could be successful. A gold ball bonding process called either stand-off-stitch bonding (SSB) or ball-stitch-on-ball bonding (BSOB) was used to determine the effects of nodules and scratches on wire bonds. The dimension of nodules, including height, and the size of scratches, including width, were measured before wire bonding. Wire bonding was then performed directly on various sizes of nodules and scratches on the bonding pad, and the evaluation of wire bonds was conducted using wire pull tests before and after reliability testing. Based on the results of the wire-bonding evaluation, the internal specification for nodules and scratches for wirebondable PCBs was modified to allow nodules and scratches with a certain height and a width limitation compared to initially adopted internal specifications of no nodules and no scratches. Such an approach resulted in improved yield at the PCB manufacturer.
Mx400L has an IPC 9850 speed of 42,000 CPH. It will accomodate a PCB size up to 26.77" x 18.11", it has 6 module heads on the front gantry, 6 module heads on the rear gantry. minimum lead pitch is 15mil, and it will place parts down to 01005 (0402 me
The smt machine now is doing led 5050,IC And resistors. It already updated in 2019 and in July it sell more than 60 sets for one big offer in China , it with 28 electric feeders , more faster than the cheaper machines .it is used for all kinds of ele
| https://www.feedersupplier.com/sale-13119284-fuji-xp-feeder-storage-carts-feeder-cart-fuji-feeder-fuji-xp-feeder-storage-carts.html
,etc.We focus on both production and sales. Also,we provide technical supports and lifetime online supports after sales. Overall,choosing us will save your time of searching and improve the efficiency of your production line. Tag
| http://etasmt.com/te_news_industry/2021-09-01/24164.chtml
Lead-free processes propose new requirements on reflow soldering quality-SMT Technical-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Home About
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
