http://www.flason-smt.com/product/Siemens-Mounter-SIPLACE-X3S-SX2-High-Speed-Mounter.html Siemens Mounter SIPLACE X3S SX2 High Speed Mounter Siemens Pick and Place Machine Patch speed: 160000CPH Dimension: Weight: Product description: Siemens
Siemens SIPLACE X3S+SX2 (+WPC) Pick and place Machine Siemens SIPLACE X3S+SX2 (+WPC) Pick and place Machine Patch speed: 160000CPH Mounting accuracy: 22 microns Feeder capacity: 250 8mm + 28 layer automatic Ic feeder Product description: Sieme
Electronics Forum | Thu Apr 15 11:53:37 EDT 2004 | Claude_Couture
Hi everyone, Our QC manager is bugging me about calibrating the TC readings on our reflow ovens. I keep telling him that doing a regular reflow profiling with a mole is sufficient to see if the oven temperature are normal. The manuals state that TC c
Electronics Forum | Sun Jan 15 10:36:23 EST 2006 | Robert
Oven runs, input/output sensors work but no product tracking. Various resets have no effect and cannot reset Drive Cycle Timer due to "not calibrated" error. Where can I find the procedure without manuals on-hand?
Industry News | 2019-05-22 11:33:05.0
While no material is entirely lint-free, there are materials that are virtually lint-free. This is an important attribute to look for in your stencil wiping roll. Contaminated PC boards are a common problem. While the contamination itself is often thought of as a mystery to the printer operator, the cause may come from the stencil wiping roll. This is largely due to the sticky solder paste and sharp edges of the stencil’s apertures.
Industry News | 2019-05-22 11:33:07.0
While no material is entirely lint-free, there are materials that are virtually lint-free. This is an important attribute to look for in your stencil wiping roll. Contaminated PC boards are a common problem. While the contamination itself is often thought of as a mystery to the printer operator, the cause may come from the stencil wiping roll. This is largely due to the sticky solder paste and sharp edges of the stencil’s apertures.
Career Center | Santa Ana, California USA | Engineering
We are seeking a Field Service Engineer to demonstrate and support our complete line of equipment, including simulations, demonstrations, training and support on solder paste inspection, robotic soldering, AOI, clean room ovens, test systems and othe
Career Center | Colton, California USA | Engineering,Maintenance,Production,Quality Control,Research and Development,Technical Support
• Strong experience with the installation, training, and repair on a variety of electro-mechanical, pneumatic, PLC, or computer controlled systems. • Strong Knowledge in SMT equipment, Screen Printer, AOI/SPI, Conformal Coat Systems, Reflow oven, X-R
Career Center | Cavite, Philippines | Engineering,Technical Support
I had 15 years Handling SMT Equipment.