New Equipment | Solder Materials
As the world's leading developer of advanced solder paste materials, Henkel delivers decades of technology and expertise for optimized process performance. With ground breaking new formulations to provide an easy transition to lead-free as well as pr
New Equipment | Solder Materials
Superior Drop Shock Performance AND Thermal Cycling Reliability Current Industry Dilemma The standard set of Pb-free alloys has a dramatic trade-off between thermal cycling and drop testing. Additionally, all these SAC alloys are far inferior to
Electronics Forum | Sat Dec 30 04:23:50 EST 2023 | 012band
I have used LTS (Sn57.6%Bi0.4%Ag) solder balls for soldering on Ni/Au pads, and I have observed a wrinkle pattern on the ball surface. When you attempted soldering on CuOSP substrate pads under the same conditions, the surface appeared normal. Additi
Electronics Forum | Mon Oct 22 05:04:08 EDT 2007 | jkhiew
Hi, Recently we have encountered solder wicking on components termination (total of 13 pcs of components on one pcb)with Ag/Pd finishes during lead-free reflow soldering. The pcb is LF HASL surface finish and LF solder paste composition is SAC305.We
Industry News | 2015-02-04 18:05:58.0
he SMTA Capital Chapter is pleased to announce its first meeting of 2015 on March 17th, scheduled from 5:30 pm to 8:00 pm at EIT (Main Building Lunchroom), 108 Carpenter Drive, Sterling, VA 20164. The focus of this chapter meeting will be “Elimination of Pb-Free Risk by Robotic Hot Solder Dip (RHSD)” presented by Donald Tyler, Managing Director, Corfin Industries.
Industry News | 2010-09-13 15:36:15.0
IPC — Association Connecting Electronics Industries® has released IPC-1601, Printed Board Handling and Storage Guidelines. The industry's sole standard on the handling, packaging and storage of printed boards, IPC-1601 provides users with guidance on how to protect printed boards from contamination, physical damage, solderability degradation, electrostatic discharge and moisture uptake.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2010-04-29 21:40:37.0
The purpose of this paper is to investigate the effects of reflow time, reflow peak temperature, thermal shock and thermal aging on the intermetallic compound (IMC) thickness for Sn3.0Ag0.5Cu (SAC305) soldered joints.
ALPHA® Telecore XL-825 lead-free cored solder wire minimizes spattering in hand soldering operations, thus reducing circuit board contamination and enhancing worker safety and comfort.
SN100C P810 D4????????? ???????????? ??????????????????????????????????? ?????????????? ???http://www.nihonsuperior.co.jp/
SMTnet Express, September 9, 2021, Subscribers: 26,718, Companies: 11,435, Users: 26,839 Investigation of the Mechanical Properties of Mn-Alloyed Tin-Silver-Copper Solder Solidified with Different Cooling Rates Manganese can
Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. The purpose
| https://www.eptac.com/faqs/ask-helena-leo/ask/silver-immersion-finish-boards
. If the finish has tarnished is there any way to restore the immersion finish for better solder quality? Answer: The use of a more aggressive flux, something in the OAH1 category should be able to clean the surface and allow it to solder, which will also allow the solder to flow on the land areas of the terminations
GPD Global | https://www.gpd-global.com/lead-free-solder-paste-dispensing.php
. Unlike a screen printer that is fixed in pad placement and volume, a dispenser can easily alter dispense location and volume based on adjusted program parameters
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411
