Industry Directory | Consultant / Service Provider / Manufacturer
Micro Air, Inc. is an industry leader supplying digital instrumentation to commercial and business sectors within the HVAC marketplace. We provide products and engineering to some of the most substantial manufacturers in the world.
Industry Directory | Manufacturer
Nitrogen Hot Air Circulation Reflow, Screen Printer, Wave Soldering, Double Unloader, Inverter Machine, 90° PCB Transfer Buffer Loader & Unloader
Full Hot Air Lead-Free Reflow Oven With PC Temp Control System (A800) Introduce: 1, Heating system adopts ETA patent heating technology 2, The use of imported large current solid state relay contact output, safe, reliable, equipped with a dedicated
Main product: SMT Assembly Reflow Oven, SMT Hot Air Reflow Oven, Lead Free Reflow Oven, SMT Reflow Oven, SMT Mounting Machine, Elctronic Equipment, PCB Machine, reflow oven, SMT Assembly, SMT/SMD Equipment, PCB Printer, screen printing SMT assembly
Electronics Forum | Tue Mar 30 13:40:30 EST 1999 | dennis warner
We've been using a newly installed DI re-circulating system. It's been a big headache. Mostly understanding what causes our resistivity to be unpredictable. I think I've got a handle on that part now. The system consists of a Carbon,HMR(chealet),Cati
Electronics Forum | Tue Mar 30 19:58:25 EST 1999 | Scott McKee
| We've been using a newly installed DI re-circulating system. | It's been a big headache. Mostly understanding what causes our resistivity to be unpredictable. I think I've got a handle on that part now. The system consists of a Carbon,HMR(chealet),
Used SMT Equipment | Coating and Encapsulation
The SCS P-3201 Dip Coat System is a free-standing precision dip coater designed to coat circuit boards in non-automated production settings. With this system, you can effectively and efficiently apply a range of coatings, including urethane, epoxy, s
Used SMT Equipment | Soldering - Reflow
Weight : 190 Kg > Power : 3 ph 415 Vac 32 Amp > Board Size : max 400mm wide max 16 Inch wide > Lead Free Approved : Yes > Heating System : Circulating hot air > Heating Power : 8100 Watt > Cooling System : Axial bottom fan > Tunnel Length : 9
Industry News | 2001-01-24 07:49:08.0
IPC has announced the circulation of the final interim ballot for IPC-2540, CAMX Shop Floor Equipment Communications standard series. After a final ballot has been tabulated and approved, the standard is made available in 30 days.
Industry News | 2011-05-06 22:30:34.0
Nordson ASYMTEK introduces its new film coater for automated, selective, and precision application of conformal coating materials. The Nordson ASYMTEK Select Coat® SC-280 provides greater than 99 percent fluid transfer efficiency, improving material utilization by 30 to 50 percent.
Parts & Supplies | Chipshooters / Chip Mounters
> JUKI ESL13000000 VACUUM PAD 15 JUKI ESL13000100 PHOTO MICRO SENSOR A JUKI ESL13001000 TUBE union (KL700) JUKI ESL130011A0 CONVEYOR MOTOR (KZ500) JUKI ESL13002000 CLAMP LEVER JUKI ESL13003000 T TYPE NUT JUKI ESL130031A0 OPERATION PANEL (KL700) JUKI
.jpg)
Parts & Supplies | Soldering - Reflow
This reflow oven is top quality oven represent the world's best low cost, high performance solder reflow sytem. The sensor is designed in the front of tip and the temperature induction is very exact and sensitive, the speed of heating and recovery of
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Technical Library | 2019-11-13 02:09:44.0
Dry oven is a must instrument almost for every laboratory in different industries,with nearly 20 years efforts and innovation,Climatest now masters core technique of dry oven manufacturing,no matter on temperature uniformity or temperature stability.Behind the quality is 15 years of consistent persistence,strong belief in excellence; from design to R & D to production, from promotion to sales to installation; every step should reach excellence,What you see, you use our products, you choose, you feel that we do our best,this is our faith. Dry Ovens are used to dry or temper electronic components,material tests,torrefaction, wax-melting ,high temperature aging ,preheating and sterilization in industrial and mining enterprises, laboratories and scientific research institutes. .Exterior chamber is made by reinforced steel with painting; working chamber made by anti-corrosion stainless steel SUS#304 .Intelligent PID control, LED controller with over-temperature alarm,timing range within 0~9999min .Hot air circulation system composed of Germany imported low-noisy air blower and optimal air duct which ensure uniform temperature distribution .Double layers of glass door, large transparent window to observe specimen .Forced air convection Climatest manufactures desktop and floor-standing models with RT+10°C-200°C,250°C,300°C,350°C,400°C temperature range,and customized as per special requirement,if you wanna know more details about our dry oven,please visit our product page:https://climatechambers.com/industrial-dry-oven/200-degree-c-hot-air-oven.html
Full Hot Air Lead-Free Reflow Oven With PC Temp Control System (A800) Introduce: 1, Heating system adopts ETA patent heating technology 2, The use of imported large current solid state relay contact output, safe, reliable, equipped with a dedicated
Main product: SMT Assembly Reflow Oven, SMT Hot Air Reflow Oven, Lead Free Reflow Oven, SMT Reflow Oven, SMT Mounting Machine, Elctronic Equipment, PCB Machine, reflow oven, SMT Assembly, SMT/SMD Equipment, PCB Printer, screen printing SMT assembly
Career Center | bangalore, India | Management
• Hands on experience in planning functions i.e. material planning, scheduling, inventory management. • We have a good knowledge of BOM, KANBAN, MIN-MAX order quantity, • We have Good knowledge in ERP Baan System , • Demand adjustment as per cu
| http://etasmt.com/cc?ID=te_news_bulletin,24968&url=_print
that led to the successful implementation of Sony’s lead-free, flux-free assembly process. Among these new technologies were two proprietary systems
Lewis & Clark | https://www.lewis-clark.com/product-tag/asymtek-sl940-conformal-coater/
: SL-940E Vintage: 2016 Description: Details: Software Version: ECW 5.0 Version 538 o Coating Applicator: 787MS MicroSpray Valve VCS Vision Systems with Fiducial Camera and pattern recognition Circulation System with Heater and Pump Tank cleaning and dry air module for handling moisture sensitive material UV Light MCO
