Manufactures InfiniFlexx EPTFE jacketed flat cables for Millions of flex cycles over a small bend radius. Cables can be made with twisted pairs, coax or power pods. Extreme flex life in rolling flex applications. Montrose/CDT flex cable specialist.
Industry Directory | Consultant / Service Provider / Manufacturer
Contract Manufacturer/PCB Assembly
The Model 74D is a triple head Rotary Wire Stripper designed to provide a Three Stage Strip on a multitude of different cables types. Coax, Hookup, and small Multi-Conductor Cables can all be processed with this versatile Bench Top Machine.
New Equipment | Cable & Wire Harness Equipment
Overview The CoaxStrip 5200 is a semi-automatic, programmable multi-step stripping machine for coaxial, multiconductor cable and single conductor wire. The CoaxStrip 5200 can process cables up to 7 mm (0.27") outer diameter and strip lengths up to 3
Electronics Forum | Mon Jun 25 12:23:15 EDT 2007 | coax
As for the bubbles/fisheyes, try increasing your thinner ratio. This sounds like your coating is thickening up before you are able to apply it to your application.
Electronics Forum | Sat May 07 07:03:16 EDT 2011 | jimlas53
Thanks for the suggestion, Bobpan. I'll start looking for a replacement coax cable. Would we be better off to look for a Quadalign system and replace the Cyberoptic unit? Doug
Used SMT Equipment | In-Circuit Testers
Agilent HP 3070 In Circuit Test System For Sale The system came off line in good running condition! Machine is complete with keyboard, mouse, and all cable connections Please see attached pictures and configuration below copied from file !!!! 5 0 2 1
Used SMT Equipment | AOI / Automated Optical Inspection
Mek Marantz PowerSpector M22XGTAz-520 3D AOI Vintage: 12/2018 Details: Direct Loading High Precision 9- Camera AOI Max PCB Size: 520MM Orca Chassis 4Mp, 24bit CAM with 18.75u High Grade TC Lens 8 USB3 Vision-Multiplex
Industry News | 2013-04-29 16:22:20.0
IPC — Association Connecting Electronics Industries® announces the release of a new DVD containing the photos and illustrations found in IPC/WHMA-A-620B, Requirements and Acceptance for Cable and Wire Harness Assemblies.
Association Connecting Electronics Industries (IPC)
Parts & Supplies | Assembly Accessories
YAMAHA KJJ-M7558 M Light Coax Assy YAMAHA Machine Accessory YAMAHA board
Parts & Supplies | Pick and Place/Feeders
Coax.cable 50Ohm D2,8 RG174A/U L=2,5m
Technical Library | 2020-05-07 03:46:27.0
The selective soldering process has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty, however some types of challenging components require additional attention to ensure optimum quality control is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures and/or pallets often places an additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors,can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues due to their beryllium copper termination pins.
Technical Library | 2022-08-08 15:06:06.0
Selective soldering has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty however some types of challenging components require additional attention to ensure that optimum quality is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures, or solder pallets, often places additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors, can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues because of their beryllium copper base metal pins. Key Terms: Selective soldering, drop-jet fluxing, sustained preheating, flux migration, adjacent clearance, lead-to-hole aspect ratio, lead projection, thermal reliefs, gold embrittlement, solderability testing.
Make: MEK Model: PowerSpector GTAz 650L CE 3D AOI Vintage:2017 Details: • InLine 3D AOI • 9 Camera System • Pacman 2 650 Chassis • GTAz head • 4mp 24bit CAM with 18.75u High grade TC Lens • 8 USB3 Vision Multiplex Side Cameras with 10u TS lens • 30
00374610-01 Bearing flange drive wheel 00374611-01 Drive wheel belt 00374653-01 DRIVER COMPLETE 00374681-01 SIPLACE C Pro 1.4 Basic Package; includes following Software: Programmingsoftware, Operatormonitoring and one MSDE data base; for max. 5 SI
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS) Recert.
The Certified IPC/WHMA-A-620 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC/WHMA-A-620 Specialist.
1st Place Machinery Inc. | http://www.firstplacemachinery.com/firstplace_hp3070.html
! port
