Industry Directory: component gap (5)

Reinhausen Plasma GmbH

Industry Directory | Other

Supplier of plasma solutions for surface finishing and coating.

AI Technology, Inc. (AIT)

Industry Directory | Manufacturer

Manufactures and Provides: thermal interface materials (TIM) including insulated-metal-substrates, gap-filling compressible phase-change pads, thermal gels-greases,(EMI/RFI) mitigation conductive gaskets and other products.

New SMT Equipment: component gap (99)

Thermal Transfer, Thermal Interface Materials

Thermal Transfer, Thermal Interface Materials

New Equipment | Materials

We are well versed in the following thermal application materials:     Sil-Pad thermally conductive insulators     Gap-Pad thermally conductive gap filling material     Q-Pad thermal grease replacement film     Bond-Ply thermally conductive adh

ORION Industries

Waterjet Cutting

Waterjet Cutting

New Equipment | Other

Waterjet allows for improved cutting tolerances, improved lead times and the ability to provide highly complex geometry. Using a stream of water with forces of 55,000 PSI yields fast production rates and tool free cutting. Our single head and 4-head

ORION Industries

Electronics Forum: component gap (140)

Component side by side gap

Electronics Forum | Thu Jun 25 05:19:39 EDT 2020 | SMTA-Davandran

Dear all, Anyone know what is minimum gap between SMT component.? Anyone have design guideline for it.

Ways to control SMT gap to PCB

Electronics Forum | Thu Dec 07 14:28:25 EST 2006 | russ

Bad design if you have to have a perfect 1206 part. you will always have a lift of some sort when reflow soldering. Solder is 3 dimensional, therefore you cannot get any underneath component, thus eliminating the automated SMT process. Cannot glue

Used SMT Equipment: component gap (4)

Universal Instruments Polaris 7514

Universal Instruments Polaris 7514

Used SMT Equipment | Pick and Place/Feeders

Universal Instruments Polaris Machine For Sale Very clean and in Good Condition See attached pictures and information below Polaris Model Number: 7514A Equipment Number: 10076306 Year 2008 Travel: 550 mm x 800mm Repeatability: +/- 0.01

1st Place Machinery Inc.

CONTACT SYSTEMS SM-2009

CONTACT SYSTEMS SM-2009

Used SMT Equipment | Circuit Board Assembly Products

The product introduction The SM-2009 scissors & pneumatic type separator, we use the most advanced non-stress idea to designed it, it’s help to prevent the chap phenomena as the PCB separated by the general separator, it’s improve the PCB’s quality

Shenzhen Sam Electronic Equipment Co.,Ltd

Industry News: component gap (197)

2002 NEMI Roadmap Points to Areas of Opportunity for Industry

Industry News | 2003-04-07 10:16:38.0

Portable Products and Optoelectronic Applications Still Hold Promise for Growth

SMTnet

IPC and SMTA Announce the Session 1 Agenda for the High Performance Cleaning and Coating Conference

Industry News | 2010-09-20 19:36:19.0

Industry-leading associations IPC and SMTA jointly announce the agenda for Session 1 of the High Performance Cleaning and Coating Conference, scheduled to take place November 16-18, 2010 at the Renaissance Hotel & Convention Center in Schaumburg, Illinois.

Surface Mount Technology Association (SMTA)

Parts & Supplies: component gap (7)

Universal Instruments 51458802 51458801 Universal Genesis Pick And Place Feeder Gold 56mm Size

Universal Instruments 51458802 51458801 Universal Genesis Pick And Place Feeder Gold 56mm Size

Parts & Supplies | Coating and Encapsulation

We can supply you the following UNIVERSAL Feeders. Also Feeder Parts, Feeder Storage Carts / Feeder Trolley, Feeder Calibration Jig. 49889209 8mm High Performance DL-60 (Gold Plus) 49889210 8mm High Performance DL-60 (Gold Plus) 49889211 8mm High

KingFei SMT Tech

Universal Instruments 24mm Size Pick And Place Feeder , 50935004 / 50935003 SMT Machine Parts

Universal Instruments 24mm Size Pick And Place Feeder , 50935004 / 50935003 SMT Machine Parts

Parts & Supplies | Visual Inspection

We can supply you the following UNIVERSAL Feeders. Also Feeder Parts, Feeder Storage Carts / Feeder Trolley, Feeder Calibration Jig. 49889209 8mm High Performance DL-60 (Gold Plus) 49889210 8mm High Performance DL-60 (Gold Plus) 49889211 8mm High

KingFei SMT Tech

Technical Library: component gap (11)

UV Laser PCB Depaneling Machine Improve Cutting Effect

Technical Library | 2021-09-02 08:17:07.0

We are a professional manufacturer of PCB depaneling machines, which is workable for all boards, including flex and regid boards, v-scored boards and routed boards. Laser pcb depaneling is non-contact way without mechanical stress,this solution is good for modern precision PCB depaneling. It has below advantages: 1. No dust The production environment of the circuit board industry is carried out in the dust-free workshop. The traditional pcb depaneling equipment, such as blade moving type machine, will inevitably produce residues and micro powder, which will pollute the 10000 and 1000 class dust-free workshops and affect the conductivity of products. The UV laser PCB cutting machine is a vaporization processing process, which will not produce dust and is conducive to the conductivity of the product. 2. High cutting precision The processing gap of high-precision traditional processing equipment can not reach the gap width of less than 100 microns, which will cause certain damage to the lines on the edge or PCBA circuit board containing components. The focus spot of the laser cutting machine is small, and the ultraviolet cold processing mode has little thermal impact on the edge of the circuit board. The cutting position accuracy is less than 50 microns, and the cutting size accuracy is less than 30 microns, which will not affect the edge of the circuit board, and the precision is high. 3. No stress Traditional processing methods generally have V-grooves, which will cause certain damage to the board in the manufacturing process. The UV laser PCB cutting machine can directly cut the bare board without making V-grooves. In addition, the traditional processing methods directly use tools to act on the circuit board, especially the stamping method has a great impact on the circuit board, which is easy to cause board deformation. The laser cutting machine is a non-contact processing mode, which acts on the surface of the material through the high-energy beam, which will not cause the influence of stress and the deformation and damage of the circuit board. 4. For special-shaped cutting, it is easy to automate The UV laser PCB cutting machine can cut for any shape without replacing any props and fixtures, and without steel mesh. The same equipment can meet special-shaped and straight-line cutting, which is easy to realize assembly line automatic production and high flexibility. It is easy to improve production efficiency and save production process and production cycle. In particular, it can quickly and efficiently meet the needs of rapid proofing, directly import the drawing, and then locate the cutting. 5. High compatibility The UV laser PCB cutting machine can process the materials around the circuit board, such as PCB, FPC, covering film, pet, reinforcing board, IC, ultra-thin metal cutting, etc. it has strong practicability, is compatible with the processing of a variety of materials, is easy to operate, can be imported into the drawing, does not need to adjust any mechanical parts, and is easy to operate and maintain. 6. Good cutting edge effect The cutting edge is smooth and neat without burr. It can be processed and formed directly according to the size of the drawing, which is conducive to improving the yield of the product. It can be directly installed into the subsequent process without further processing. For more details about UV laser depaneling, please feel free to contact us. www.pcbdepanelingrouter.com

Winsmart Electronic Co.,Ltd

New Requirements for SIR Measurement

Technical Library | 2015-02-27 16:46:30.0

During the last period of newly assembled electrical devices (pcbs), new component types like LGA and QFN were also qualified as well as smaller passive components with reliability requirements based on the automotive and industrial industry. In the narrow gaps under components, residues can accumulate more by the capillary forces. This is not that much a surface resistance than an interface issue. Also that the flux residues under such types of components creates interaction with the solder resists from the pcb, as well as the component body was not completely described in the standard SIR measurement. On the other hand also, electrical influence with higher voltage creates new terms and conditions, in particular the combination of power and logic in such devices. The standard SIR measurement cannot analyze those combinations.The paper will discuss the requirements for a measurement process, and will give results. The influences of the pcb and component quality will also be discussed. Furthermore it will describe requirements for nc solder paste to increase the chemical/thermical/electrical reliability for whole devices

Heraeus

Videos: component gap (42)

K3000 Video0109

K3000 Video0109

Videos

FKN Systek K3000 - Singulate scored and skip scored panels up to 24" long ESD protective mat on back table Adjustable front and back support table Singulate panels with components up to 2.5" high Available in 18" blade (standard) or 24" blade (

FKN Systek

PCB cutting machine , PCB separator , PCB depaneling machine, PCB V-cut separator, auto PCB separator

PCB cutting machine , PCB separator , PCB depaneling machine, PCB V-cut separator, auto PCB separator

Videos

link:https://www.ascen.ltd/Blog/Solutio/493.html ASCEN PCB separator ASC-620 PCB cutting machine can use for cutting LED long board and also can use to the PCBA with the high component separate operation.It is the best way to replace the way to purch

ASCEN Technology

Training Courses: component gap (8)

PCED Printed Circuit Engineering Designer Online Live Training Course

Training Courses | ON DEMAND | | PCB Design Courses

The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.

EPTAC Corporation

PCED Printed Circuit Engineering Designer Online Live Training Course

Training Courses | ON DEMAND | | PCB Design Courses

The PCB design courses teach students the process, techniques and tools needed to design layout of printed circuit boards.

EPTAC Corporation

Events Calendar: component gap (1)

Oregon Chapter Tutorial: How Clean is Clean and How Do You Know for Sure?

Events Calendar | Wed Apr 21 00:00:00 EDT 2021 - Wed Apr 21 00:00:00 EDT 2021 | ,

Oregon Chapter Tutorial: How Clean is Clean and How Do You Know for Sure?

Surface Mount Technology Association (SMTA)

Career Center - Jobs: component gap (2)

New Product Introduction Engineer

Career Center | , India | Engineering,Production

About Product Operations: Product Operations is part of Global Supply Chain Management (Global Manufacturing) and is responsible for New Product Introduction and Product Life Cycle Management from Manufacturing and Supply Operations perspective. The

Cisco Systems India Private Limited

Senior Engineering Microassembler

Career Center | Brooklyn, New York USA | Engineering,Production

Mini-Circuits designs, manufactures and distributes integrated circuits, modules, and sub-systems for high performance radio frequency (RF) and microwave applications.  With design, sales and manufacturing locations in over 30 countries, Mini-Ci

Mini-Circuits

Career Center - Resumes: component gap (1)

SMT Production and Process engineer

Career Center | Hyderabad, Telangana India | Engineering,Maintenance,Production

 Experience in handling Process related issues throughout the Product Manufacturability.  Programming and maintenance of SMT Pick and Place Machines of Mirae, Panasonic, NXT and MyData  Programming and maintenance of Solder Paste Printer of DEK

Express Newsletter: component gap (735)

Partner Websites: component gap (451)

437056 - FABRIC ROLLER ASSY WITH GAP

Heller Industries Inc. | https://hellerindustries.com/parts/437056/

437056 - FABRIC ROLLER ASSY WITH GAP Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New

Heller Industries Inc.


component gap searches for Companies, Equipment, Machines, Suppliers & Information

Sm t t t t t t t t t t net
  1 2 3 4 5 6 7 8 9 10 Next
PCB Handling with CE

Software for SMT placement & AOI - Free Download.
SMT spare parts - Qinyi Electronics

Training online, at your facility, or at one of our worldwide training centers"
SMT feeders

Nozzles, Feeders, Spare Parts - Siemens, Fuji, Juki, Yamaha, etc...
2024 Eptac IPC Certification Training Schedule

Component Placement 101 Training Course
SMT spare parts

Thermal Transfer Materials.