Northern Coatings has been providing the service of applying conformal coatings for the customer, since 1993. There is no masking, dipping or hand-spraying. It is an automated system and all coatings are UV cure, ensuring quick turn around.
Industry Directory | Manufacturer / Other
Rapid Coatings specialize in the automated application of conformal coating for electronics on a quick turn basis. Our goal is to provide excellent service and cut down lead times for customers.
New Equipment | Coating Equipment
The Prism Ultra-Coat is a line of programmable spray coating systems designed for the application of a wide variety of conformal coating, semiconductor coating, fuel cell coating, medical coating and solar cell coating. The Prism spray coating system
New Equipment | Coating Equipment
DC Series – Conformal Coat Dip Systems (Lab, Bench-top, In-line) SB Series – Conformal Coat Spray Booth Systems CR Series – Conformal Coat Removal Systems G3 Dispensing - Automatic Robotic – liquids, pastes or gels
Electronics Forum | Mon Aug 20 09:49:57 EDT 2018 | dontfeedphils
Not entirely clear on your question. We don't coat any of our hardware (assemblies are coated prior to hardware installation), so if coating needs to be reworked after this, then hardware removal is needed.
Electronics Forum | Sat Aug 18 10:35:41 EDT 2018 | mgerrior
Hey Phil, i'm just curious what your rework processes are for your hardware after conformal coating is applied (if any). I'm interested in conformal coating as our hardware can be exposed to moisture rich environments at customer sites but to my kno
Used SMT Equipment | Conveyors
PVA 2000 Conformal Coating Machine, 120VAC and dry shop air required, L to R Board Flow, Pin Chain Conveyor, Extended Conveyor Rails, last configured for Silicone Coatings with 10 Gallon Pressure Vessel and Narrow Spray, Fan Spray and Needle Dispense
Used SMT Equipment | Coating and Encapsulation
Specialty Coating Systems SCS4398 Confromal Coating Machine, 208 Single phase power, 80 P.S.I. clean dry shop air required, L to R board Flow, Pin Chain Conveyor, Manual Width Adjust, 19.7 Max Board Width, 3 - 10 in/sec Conveyor Speed, One Spray Valv
Industry News | 2017-07-10 17:31:47.0
GPD Global is in the process of setting up a demonstration center on the East coast of the United States. Rapid Coatings, located in Woburn Massachusetts, will be the East coast demo coating center. A GPD Global conformal coating system (SimpleCoat) configured with spray, precision dispense, and volumetric progressive cavity displacement technology will be used for Rapid Coatings production and customer demonstration.
Industry News | 2017-11-07 23:20:25.0
GPD Global offers a cost-effective, automated Conformal Coating System (SimpleCoat) with excellent repeatability for just under $40,000!!!
Technical Library | 2019-07-29 10:35:47.0
ACI Technologies can assist its users with process development and experimentation through the use of the conformal coating capabilities in the Demonstration Factory. Four types of coating processes are available at ACI Technologies: dip coating, manual spray coating, programmable spray coating, and manual brush application. (Manual brush application will not be discussed in this article.)
Technical Library | 2019-05-24 09:24:49.0
Conformal coatings are applied to Printed Circuit Board Assemblies(PCBAs) using a variety of different methods. There are six main methods of applying conformal coatings: manual spraying, automated spraying, dipping, brushing, selective coating, and vacuum deposition.
http://www.gpd-global.com Conformal coating (SimpleCoat) demonstration of the Spray Valve and Volumetric Pump in action on the SimpleCoat system. The Spray Valve sprays HumiSeal 1B31 from a height of approximately 20 mm above the board. The Volumetr
Cost-effective Solutions for Conformal Coating New cost-effective, automated Conformal Coating System (SimpleCoat TR) with tilt and rotate capability and excellent repeatability for just under $48,000. SimpleCoat basic model without tilt and rotate
GPD Global | https://www.gpd-global.com/conformal-coating-spray-masking.php
Conformal Coating Dispensing Spray Masking System Home Products Fluid Dispensing Equipment High Precision Dispenser -MAX Series Large Format Board Dispensing -DS Series Table Top Dispensing Equipment Loader
ASCEN Technology | https://www.ascen.ltd/conformal_coating/597.html
robotic conformal coating spray solution-PCB magazine loader,PCB turn conveyor,pcb conformal coating machine,PCB router,PCB depaneling machine,pcb buffer conveyor from ASCEN technology Welcome to visit ASCEN | | | | | | | Cart
