Industry Directory | Manufacturer
DriSteem provides reliable and efficient humidity control, evaporative cooling, and water treatment solutions for commercial and industrial applications.
A premier thermal management solutions company. Our highly engineered products include Heat Pipes, Heat Exchangers and Cold Plates.
The World's Best Convection Reflow Oven The ultimate high volume production reflow oven with belt speeds up to 1.4 m/min to accommodate the fastest pick and place systems. Lead Free Certified reflow oven! Maintenance Free! Lowest Nitrogen &
The World's Best SMT Convection Reflow Ovens for Large Boards and Dual Lane 1826 Mark 5 reflow oven provides consistent performance for high volume reflow requirements while minimizing preventative maintenance and floorspace. Lead Free Certified!
Electronics Forum | Thu Feb 09 09:36:55 EST 2006 | aj
All, I would like to find out if it is possible to adjust the cooling rate on a Conceptronic Reflow Oven Model HVN70. We do not use Nitrogen and the Cooloing system is Genesis GCM-1. From profiling it seems to be cooling too quickly. Any replies a
Electronics Forum | Sun Oct 18 01:55:16 EDT 1998 | PARK KYUNG SAM
WE USE 3 chamber OF Mc-DRY(MODEL NAME). THE MACHINE CAN REMOVE HUMIDITY FROM PARTS IN THE GENERAL PERIPHERAL TEMPERATURE (MAY BE 25-30;CENTIGRADE). AND IT'S CONVENIENT FOR MAN TO PUT OR TAKE OUT COMPANENT FROM CHAMBER BECAUSE THERE IS NO HOT AIR AN
Used SMT Equipment | Soldering - Reflow
Details: • 8 Heating Zones • 2 Cooling Zones • Lead-Free • Edge Hold conveyor • Windows Operating System • 208V Condition: Complete & Operational Location & Shipping: USA / FOB Origin
Used SMT Equipment | Soldering - Reflow
Speedline Electrovert Omnimax 10 oven. Vintage: 2012. Voltage: 380, 3 phase 10 top and bottom heating zone. 3 cooling zone. Direction Left to Right. Conveyor is front fix. Center support. Auto chain oil system Lead free.
Industry News | 2012-05-11 20:35:45.0
Heller Industries has been awarded a 2012 SMT VISION Award in the category of Soldering Reflow for its 1936 Mark 5 Reflow Oven. The award was presented on April 25, 2012 at the Nepcon China Exhibition.
Industry News | 2013-01-04 16:00:38.0
04 Jan 2013 Heller Industries will showcase the Mark5 Series - SMT Reflow Soldering Ovens February 19-21 in San Diego, CA USA at the IPC APEX EXPO.
Parts & Supplies | Screen Printers
P10634 MPM roll paper motor belt SPEEDLINE MPM ULTRAPRINT 1500 the camera cable, the lamps for the camera E-stops the rear fan, the one are for the cooling system P1719 MPM value pa
Parts & Supplies | Assembly Accessories
AXPC fan Assembly 949839603998 0.8M Linking Conveyor, Single Lane, for Cooling, with 6 Fan on Top MMLC-2103.8F 0.8m Linking Conveyor, without Fan MMLC-2103.8 1KURA FAN (for Samsung Reflow SRF70i82 ) U6250MKG1 1M Conveyor With
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Technical Library | 1999-05-06 11:42:16.0
The most reliable and well-designed electronic device can malfunction or fail if it overheats. Considering thermal issues early in the design process results in a thermally conscious system layout and minimizes costs through the use of passive cooling and off-the-shelf components. When thermal issues are left until completion of the design, the only remaining solution may be a costly custom heat sink that requires all the space available. Incorporating a heat sink or a fan into a product after it is fully developed can be expensive, and still may not provide sufficient cooling of the device.
1809 MK5 - Heller Advanced In-Line Vacuum Reflow Oven Nitrogen System with Balanced Flow Technology 9 Top And Bottom Heated Zones - highest zone count per linear foot in the industry! 100" Heated Length - for super throughput! 2 Internal C
A500, A600, A800 - 5, 6 or 8 top/bottom cooling zones. Heating System: Up to eight groups of top and bottom forced hot air convection heating zones. Patented heating plates in each zone uniformly transfer heat to the PCBs using forced hot air co
Events Calendar | Thu Jul 20 00:00:00 EDT 2023 - Thu Jul 20 00:00:00 EDT 2023 | Suwanee, Georgia USA
Atlanta Chapter Technical Meeting: The Science of Humidity Control in Manufacturing
Events Calendar | Thu Apr 08 00:00:00 EDT 2021 - Thu Apr 08 00:00:00 EDT 2021 | ,
Great Lakes Chapter Meeting: Flexible Wave Solder Processes and Optimization
Career Center | Hibbing, Minnesota USA | Engineering,Management
Responsibilities: The Process Engineering manager is responsible for the following: Control, accuracy, and use of manufacturing processes and assembly equipment used in manufacturing; Ensuring that the processes used meet all customer and RMS specif
Career Center | karachi, Sind Pakistan | Engineering,Production,Quality Control
For Research and Development Centre: --------------------------------------- -Give Recommendations regarding the functionality & operational security aspects in the ongoing projects by analyzing the detailed operations & functions of the product. -Mo
Career Center | San Pedro Sula, Cortes Honduras | Engineering,Maintenance,Management,Technical Support
Preventive maintenance on SMT machines. Corrective maintenance on SMT Machines Schedule of preventive maintenance programs. Minimum Inventory control for spare parts Automation process on SMT Lines Work Instructions for maintenance procedur
Cooling Technologies, Inc. Embedded computing system
SMTnet Express February 28, 2013, Subscribers: 26214, Members: Companies: 13305, Users: 34373 Effect of Cooling Rate on the Intermetallic Layer in Solder Joints While it has long been known that the Cu6Sn5 intermetallic that plays a critical role
| http://etasmt.com/cc?ID=te_news_bulletin,23366&url=_print
Curing Systems-News-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News >> News Curing Systems Curing Systems, Cooling Systems 1 to 6-lane Up to two transport levels Heavy-duty transport Uni-directional conveyor Bi-directional conveyor Accelerator belt Product-specific
Lewis & Clark | https://www.lewis-clark.com/product-tag/cti-systems-loader-unloader/
CTI Systems Loader/ Unloader Archives - Lewis and Clark, Inc. Skip to content My Cart: $ 0.00 0 View Cart Checkout No products in the cart. Subtotal