Industry Directory | Manufacturer
Master Bond is a leading manufacturer of epoxy adhesives, sealants, coatings, potting and encapsulation compounds. Master Bond specializes in epoxies, silicones and uv curable polymer systems.
ELECTRONIC MANUFACTURING SERVICES (www.sun-tec.ch) ON TEMPERATURE SENSITIVE MATERIALS: SUN-TEC has developed its own cold curing, solvent free contact glues to be able to pick and place SMD systems on heat sensitive substrates. That is why SUN-TEC's
For encapsulation of wirebonded IC’s Zymet's glob top and dam-and-fill encapsulants are UV curable, yet they have properties similar to conventional heat cured encapsulants, high Tg’s and low CTE’s. With UV cure, curing is performed quickly, inline
Electronics Forum | Thu Feb 22 12:26:33 EST 2001 | traviss
I used a Blue M batch oven quite a bit to cure in works great. All you have to do is get the board up to cure temperature, 150C normally and your all set. It will probably be in there longer than the time required but at that low temperature it shoul
Electronics Forum | Wed Feb 21 14:18:37 EST 2001 | jagman
Could anyone please give me some insight on the time/temperature requirements for curing SMT adhesive used for a high temperature (96/4 solder) application in a bake oven, rather than using reflow? I understand that it would probably vary from epoxy
.jpg)
Used SMT Equipment | Soldering - Reflow
Speedline Electrovert Omnimax 10 Oven Manufactured Year: 2012 Voltage: 380, 3 Phase 10 Zones Oven, Top and Bottom Heated Length: 3.855 mm 3 Cooling Zone Cooling Length: 1.293 mm Reflow Operating Temperature: 350 C Curing Operating Tem
Used SMT Equipment | Soldering - Reflow
2004 Vitronics XPM2 1030 The Vitronics Soltec XPM2 1030 is a reflow soldering and curing system used in electronics manufacturing. Here are some key specifications and features: Dimensions & Weights: Heating zones: 5 Cooling zones: 2 Total heating
Industry News | 2024-03-27 09:07:10.0
The world of PCB assembly is constantly evolving, and Red Glue SMT Solutions offer a revolutionary approach for double-sided printed circuit board assemblies (PCBAs). This innovative technique overcomes limitations of traditional solder paste and reflow ovens, paving the way for increased efficiency and cost savings.
Industry News | 2003-05-06 08:21:44.0
Will address key issues in the
-副本.jpg)
Parts & Supplies | Circuit Board Assembly Products
ES19204 Kapton Tape Kapton Tape is a polyimide film-backed silicone adhesive tape with extremely low electrostiatic discharge properties. Antistatic properties is in back adhesive side. It has high dielectric strength. Polyimide masking tape, offers
Technical Library | 2015-07-27 16:58:29.0
When it comes to the application of conformal coating, curing the coating plays a key role in the circuit assembly and selective conformal coating process. Curing conformal coating occurs after the coating spray/dispense process is complete. The coating is considered “cured” when the conformal coating on the circuit assembly is sufficiently tack-free to be handled. Curing can sometimes be accomplished at room temperature but takes a considerable amount of time to dry. Accelerated conformal coating curing decreases this drying period, the cure process reaches either the tack-free or a fully dried state but not quite having fully cured properties. Accelerated curing techniques include one or a combination of heat, moisture, UV light, and chemical reaction curing. This article focuses primarily on thermal or heat curing.
Technical Library | 2007-04-04 11:43:41.0
The present work offers a discussion and a first case study to identify and illustrate voiding mechanisms for a particular TIM between a heat spreader and the back of a flip chip. Pronounced differences were observed between stencil printing and dispensing in terms of initial void formation, apparently related to the specific properties of the material. Measurements of the effects of heat ramp rate and peak temperature showed the subsequent evolution and final void size distribution to be determined by the initial part of the cure profile up to the material gelling temperature.
This elevator format oven utilizes vertical space to accomodate curing applications of up to 4 hours while only occupying 96" (2.5m) of floorspace. Perfect for underfill and encapsulant.
Increase productivity, improve quality, reduce costs with vertical format curing solutions from Heller Industries. Learn more: http://www.hellerindustries.com/755-Vertical-Oven.php
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
Events Calendar | Tue Apr 07 00:00:00 EDT 2020 - Tue Apr 07 00:00:00 EDT 2020 | ,
Harsh Environment Failure - Causes & Cures - FREE Pre-Conference Webinar
Events Calendar | Wed Jun 05 00:00:00 EDT 2019 - Thu Jun 06 00:00:00 EDT 2019 | Neustadt a.d. Donau, Germany
TechDays 2019
Career Center | , Israel | Engineering,Maintenance,Technical Support
I was born on June , 1972 in Khmelnitsky city , Ukraine . I am male. From 1979 to 1987 I was studying at secondary school #7, having finished which I entered the Technical College of Khmelnitsky in specialty Machine Tools with Computer Numeric Contr
Career Center | binan city, Laguna Philippines | Engineering,Maintenance,Technical Support
6.5 Years Experience in Semiconductor Industry Specializing in Dispensing process and Equipment. 5.0 Years of Experience in Field Service Engineering. Machine Commissioning / Customer support 24 / 7, Technical Support for Customer machine and process
Lewis & Clark | https://www.lewis-clark.com/product/asymtek-uv6-18-uv-cure-oven/
Asymtek UV6-18 UV Cure Oven - Lewis and Clark Skip to content My Cart: $ 0.00 0 View Cart Checkout No products in the cart. Subtotal: $ 0.00 View Cart Checkout Lewis and Clark We Discover Equipment Opportunities NH
ASCEN Technology | https://www.ascen.ltd/conformal_coating/611.html
. Apply, cure, and ship immediately and eliminate the time-consuming steps of traditional thermal-cure and room temperature-cure technologies
