Industry Directory | Manufacturer
Manufacturer of Laser Cut & Chemical Etched Stencils.
Industry Directory | Manufacturer
Manufacturer of Laser cut stencils, thick film screens, large format screens. Variety of stainless steel materials and mesh, ITAR registered. Member of SMTA, IMAPS and IPC.
DEK Galaxy SMT Stencil Printer Maximum printing surface： 510 mm* (X) x 508.5 mm (Y)Printing speed: 2 mm/sec to 300 mm/secWeight: Approx. 680 kgProduct description: DEK Galaxy SMT Stencil Printer, Maximum printing surface： 510 mm* (X) x 508.5 mm (Y),
2.0 Cmk @ ± 25 μmProduct description: DEK E Seriels SMT Stencil Printer E by DEK, core cycle time: 8 seconds, Substrate size: 620 mm (X) x 508.5 mm (Y), System alignment capability: > 2.0 Cmk @ ± 25 μm DEK E SMT Stencil Printer DEK E SMT Stenc
Electronics Forum | Wed May 17 13:48:37 EDT 2006 | dwelch123
I'm having trouble printing leads on a fine pitch part. The lead is only .008". I'm using a DEK 265 with metal squeegee and using WS200 multicore solder paste.The stencil is laser cut and polished. I've experimented with different pressures and diffe
Electronics Forum | Mon Oct 14 10:53:28 EDT 2013 | emeto
0.5 if you use electroformed stencil or > 0.8 if you use laser cut. 2. Always use fresh paste 3. Uses the right printer parameters for your paste(for example Alpha likes fast release of the stencil from the board - in DEK this is called separation s
.jpg)
Used SMT Equipment | Assembly Accessories
E BY DEK DEK’s experienced printing specialists have developed an innovative platform for E by DEK with high-quality components, sophisticated construction, and modular design that guarantees a stable and reliable printing process even for the latest
Used SMT Equipment | Other Equipment
I have 2 Used working DEK 248 printers For Sale, they are working units. We use them for paste, but other ones we have re-purposed for Masking, Thermal Grease and at one time Thick Film. They are very good for fine pitch paste printing repeatabili
Industry News | 2010-03-27 19:26:29.0
BANNOCKBURN, Ill., USA, - IPC - Association Connecting Electronics Industries® announces the products that will be featured in the Innovative Technology Center (ITC) at IPC APEX EXPO™, April 6–8, 2010, in Las Vegas. Assessed by an IPC Review Board of industry experts, the products were selected based on their representation of a new or emerging technology of significant value and relevance to the electronics manufacturing industry.
Industry News | 2008-02-13 14:44:29.0
DEK�s experts will be on hand to discuss its successful complete fuel cell process solution on its booth within the UK pavilion at FC Expo Japan. Invited to find out why DEK customers �Expect More�, visitors to the show in Japan will discover how the mass imaging leader is using a new state-of-the-art precision screen clean room facility to maximize productivity for today�s commercial fuel cell applications.
.jpg)
Parts & Supplies | Pick and Place/Feeders
JUKI AF, AN electric feeder: AF24FS E5005706AB0, AF24FS-OP E5007706AB0 AF05HP E1001706AB0, AF081E E1002706AB0 AF081P E1004706AB0, AN081C E1009706AB0 AF16FS E4003706AB0, AF16NS E4004706AB0 AQ02HP 40042271, AF12FS E3003706AB0 JUKI FF electric fee
Parts & Supplies | Assembly Accessories
AXPC Power Supply AC/DC 9498 396 03997 Power supply WPS-10-12L Power supply LPS-200-24T Power supply WPS-15-12L Power supply WPS-120-12L Power supply PS-25-24T Power supply LPS-300-24T Power sup
Technical Library | 2023-02-13 19:23:18.0
Spontaneously forming tin whiskers, which emerge unpredictably from pure tin surfaces, have regained prevalence as a topic within the electronics research community. This has resulted from the ROHS-driven conversion to "lead-free" solderable finish processes. Intrinsic stresses (and/or gradients) in plated films are considered to be a primary driving force behind the growth of tin whiskers. This paper compares the formation of tin whiskers on nanocrystalline and conventional polycrystalline copper deposits. Nanocrystalline copper under-metal deposits were investigated, in terms of their ability to mitigate whisker formation, because of their fine grain size and reduced film stress. Pure tin films were deposited using matte and bright electroplating, electroless plating, and electron beam evaporation. The samples were then subjected to thermal cycling conditions in order to expedite whisker growth. The resultant surface morphologies and whisker formations were evaluated.
Technical Library | 2023-07-25 16:42:54.0
Printing solder paste for very small components like .3mm pitch CSP's and 01005 Chip Components is a challenge for the printing process when other larger components like RF shields, SMT Connectors, and large chip or resistor components are also present on the PCB. The smaller components require a stencil thickness typically of 3 mils (75u) to keep the Area Ratio greater than .55 for good paste transfer efficiency. The larger components require either more solder paste height or volume, thus a stencil thickness in the range of 4 to 5 mils (100 to 125u). This paper will explore two stencil solutions to solve this dilemma. The first is a "Two Print Stencil" option where the small component apertures are printed with a thin stencil and the larger components with a thicker stencil with relief pockets for the first print. Successful prints with Keep-Outs as small as 15 mils (400u) will be demonstrated. The second solution is a stencil technology that will provide good paste transfer efficiency for Area Ratio's below .5. In this case a thicker stencil can be utilized to print all components. Paste transfer results for several different stencil types including Laser-Cut Fine Grain stainless steel, Laser-Cut stainless steel with and w/o PTFE Teflon coating, AMTX E-FAB with and w/o PTFE coating for Area Ratios ranging from .4 up to .69.
SMT Foil Stencils are laser cut solder paste stencils designed to work on their own for hand printing or with stencil tensioning systems. These laser cut stencils do not need to be permanently glued in a frame. These so-called frameless stencils are
Swiftmode's Hyperclean Under Stencil SMT Wiper Rolls are the only product in the market that has beed developed specifically for the application. Best vacuum performance, less IPA usage and No loose fibres making the solder paste printing process mor
Career Center | Zeeland, Michigan USA | Production
Gentex is a global, hi-technology electronics company that is managed by engineers and others who understand the freedom and discipline that are required to run an entrepreneurial company. We develop and manufacture high quality products for the aut
Career Center | Lapu-lapu, Cebu Philippines | Engineering,Maintenance,Production
Sept. 2, 2009 to Present, TPM2, LEAR Corporation, MEPZ-1, Lapu-Lapu City • Provides SMT engineering support to day-to-day manufacturing operations. • Handles SMT pick-and-place machine (Fuji, CP7, CP6 and QP242 Series, Universal Genesis GI-14D). •
Career Center | ORLANDO, Florida USA | Engineering,Maintenance,Production,Technical Support
Manufacturing tech/eng for a contract manufacture for 10+ years. Been working in the SMT industry for a total of 20yrs. Have done everything from operator to process work. Most familiar with Assembleon, MPM, DEK, BTU,Electrovert, SLIM-KIC, SUPER-MOLE
KingFei SMT Tech | http://www.smtspare-parts.com/sale-13117348-dek-support-pin-107785-112069-smt-spare-parts-tooling-pin-magnetic-81mm-std-dia.html
through Interactiv, which store detailed process and setup information, graphical tips and assistance. Users can also work with remote DEK technicians through the virtual private network, including jointly controlling the machine to improve settings, fine-tuning machine settings and solving machine problems
KD Electronics Ltd. | http://www.kundasmt.com/a/PRODUCTS/1517.html
EQUIPMENT Equipment Accessories REFLOW FURNACE MPM DEK Rehm HELLER OTHER PARTS CONTACT US SURFACE MOUNT SYSTEM Product number:00343710-03 Description
