Manufactures a wide range of environmental test solutions capable of temperature and humidity cycling, thermal shock, production stress screening, accelerated stress testing, combined environment testing, controlled humidity exposure.
Viconics� mission is to provide value and innovation in microcomputer-based temperature and humidity controls for the commercial HVAC market. Products range are controls, from thermostats and humidistats to sophisticated heat pump controls.
2.0 Cmk @ ± 25 μmProduct description: DEK E Seriels SMT Stencil Printer E by DEK, core cycle time: 8 seconds, Substrate size: 620 mm (X) x 508.5 mm (Y), System alignment capability: > 2.0 Cmk @ ± 25 μm DEK E SMT Stencil Printer DEK E SMT Stenc
Electronics Forum | Tue Apr 13 14:49:15 EDT 2010 | davef
90%) from the sample, and the bake time and temperature specified herein are minimums. To improve test accuracy, or to prevent heat damage, other bake parameters may be AABUS. 2 Applicable Documents IPC-QL-653 Certification of Facilities that Inspect
Electronics Forum | Thu Apr 12 00:56:20 EDT 2007 | Jani
Our SMT production and storage area is air-conditioned, constant temperature is maintained but the humidity is not controlled , the raw SMT material is stored in a "Drier" cabinet, but since we assemble hybrid SMT and thru-hole PCB assemblies, the SM
Used SMT Equipment | Screen Printers
EbyDEK printer specification： ①Automatic Fiducial Setup ②Fast Print Speed ③Networking ④Small Fiducial ⑤Speed Up ⑥Tooling Deviation Monitoring ⑦Vision Plus ⑧Windows 7 Operating System Specify ①Blue USC Alternative Park ②DUI Hardware
Used SMT Equipment | Screen Printers
2.0 Cmk @ ± 12.5 μm (± 6 sigma) System alignment capability > 2.0 Cmk @ ± 25 μm (± 6 sigma) Optimum core cycle time 8 seconds Substrate size 50 mm (X) x 40.5 mm (Y) to 620 mm (X) x 508.5 mm (Y) Operating System Windows 7 Embe
Industry News | 2003-06-23 08:49:39.0
Three Organizations from the US, Europe and Japan to
Industry News | 2016-10-10 10:59:34.0
Sypris Electronics will be liquidating some of their assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 7:00am EDT on october 24, 2015 and the closing will begin at 11:00am EDT on November 11, 2016.
Parts & Supplies | Pick and Place/Feeders
This splice tape is used for jointing carrier tapes in the SMT process, It is made of 2 silver tapes and release paper. Size: 8mm, 12mm, 16mm, 24mm Main Characteristic 1, Peeling-off force(N/25mm)by angle of 180 degree. 2,Retaining(H/25*25mm)
Parts & Supplies | SMT Equipment
The AEC series is an ideal standard aluminum electrolytic capacitors in a broad range of consumer, industrial and automotive electronics applications requiring extend life , extended temperature range , and low profile . The ROHS-compliant series c
Technical Library | 2024-08-29 18:30:46.0
The mechanical experience of consumption (i.e., feel, softness, and texture) of many foods is intrinsic to their enjoyable consumption, one example being the habit of twisting a sandwich cookie to reveal the cream. Scientifically, sandwich cookies present a paradigmatic model of parallel plate rheometry in which a fluid sample, the cream, is held between two parallel plates, the wafers. When the wafers are counterrotated, the cream deforms, flows, and ultimately fractures, leading to separation of the cookie into two pieces. We introduce Oreology (/Oriːˈɒl@dʒi/), from the Nabisco Oreo for "cookie" and the Greek rheo logia for "flow study," as the study of the flow and fracture of sandwich cookies. Using a laboratory rheometer, we measure failure mechanics of the eponymous Oreo's "creme" and probe the influence of rotation rate, amount of creme, and flavor on the stress–strain curve and postmortem creme distribution. The results typically show adhesive failure, in which nearly all (95%) creme remains on one wafer after failure, and we ascribe this to the production process, as we confirm that the creme-heavy side is uniformly oriented within most of the boxes of Oreos. However, cookies in boxes stored under potentially adverse conditions (higher temperature and humidity) show cohesive failure resulting in the creme dividing between wafer halves after failure. Failure mechanics further classify the creme texture as "mushy." Finally, we introduce and validate the design of an open-source, three-dimensionally printed Oreometer powered by rubber bands and coins for encouraging higher precision home studies to contribute new discoveries to this incipient field of study
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
The ASYMTEK Qadence™ closed-loop flow control system maintains a stable flow rate by volume for high quality conformal coating results – automatically compensating for viscosity changes related to temperature, humidity and batch-to-batch variation.
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
Events Calendar | Tue Aug 18 00:00:00 EDT 2020 - Tue Aug 18 00:00:00 EDT 2020 | ,
How to Minimize Humidity Interaction with PCBAs for Robustness
Events Calendar | Wed Apr 18 00:00:00 EDT 2018 - Thu Apr 19 00:00:00 EDT 2018 | ,
Stencil Printing Process and Solder Paste Inspection – An In-Depth Look - SMTA Webtorial
Career Center | San Pedro Sula, Cortes Honduras | Engineering,Maintenance,Management,Technical Support
Preventive maintenance on SMT machines. Corrective maintenance on SMT Machines Schedule of preventive maintenance programs. Minimum Inventory control for spare parts Automation process on SMT Lines Work Instructions for maintenance procedur
Career Center | Sta. Rosa, Philippines | Maintenance,Production,Technical Support
Complete knowledge in smt,aoi and reflow. 11 years working experienced in production and 5 years experienced in the field service job.
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/asymtek/your-process/fluid-types/rtv-silicone
Room Temperature Vulcanizing (RTV) Silicone ASYMTEK Products Corporate | Global Directory | Languages Division Only All of Nordson Fluid Dispensing Systems Jets
KingFei SMT Tech | http://www.smtspare-parts.com/buy-dek_spare_parts-page4.html
Buy dek spare parts, Good quality dek spare parts manufacturer Leave a Message We will call you back soon! Your message must be between 20-3,000 characters
.gif)
