Industry Directory | Consultant / Service Provider / Distributor / Equipment Dealer / Broker / Auctions / Manufacturer / Manufacturer's Representative
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Industry Directory | Manufacturer
DONGGUAN KINGSUN AUTOMATION TECHNOLOGY CO.,LTD is a company which mainly provide used and new SMT parts, provide repair SMT key parts service,new/used SMT machine trading,SMT consumables and Peripherals equipment,Clean room, ESD..
Dual Chamber Module - Dual Chambers + Dual Blowers + Dual Heaters + Dual T/Cs. Bifurcated (Dual) chamber reflow oven allows 2 different thermal profiles to run simultaneously in the same reflow oven foot print Improved temperature uniformity acro
When Applications Require Large Board Processing &/or Versatility The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesive, solder paste
Electronics Forum | Tue Nov 17 08:09:28 EST 2009 | kpm135
Standard component tray for what Pick and Place machine. I know of different ones made for different machines but each machine has different feeders and handles it a little bit differently.
Electronics Forum | Wed Apr 02 15:35:27 EDT 2008 | jdengler
Our AOI machine can save various views of the same part number since we all know that different manufacturers will mark parts differently, some manufacturers vary their own marks. We get parts from the same manufacturer but different date codes that
Used SMT Equipment | Pick and Place/Feeders
"Sealed Bid" Auction Bidding Opens On February 9, 2015 At 8AM EST Bidding Closes On February 24, 2015 Promply At 5PM EST ** This Is Not An Ebay Style Auction ** ** It Is A Sealed Bid Auction ** ** Bidders Should Submit Maximum Bids When Enteri
Used SMT Equipment | Screen Printers
“Sealed Bid” Auction Bidding Opens On February 9, 2015 At 8AM EST Bidding Closes On February 24, 2015 Promply At 5PM EST ** This Is Not An Ebay Style Auction ** ** It Is A Sealed Bid Auction ** ** Bidders Should Submit Maximum Bids When Enteri
Industry News | 2019-12-17 14:33:13.0
December 17, 2019 – GPD Global has placed a MAX II precision dispenser at Universal's lab in New York (APL).
Industry News | 2011-04-22 21:36:56.0
GPD Global announces that its MAX Series Dispensing Systems are the dispensers of choice for high accuracy and repeatability applications.
Parts & Supplies | Repair/Rework
The RocHard 1 MilProbe is a 0.3" long Micro-tip in a 4 3/8" long hex shape stainless steel handle. The Micro-tip is tapered to a one mil diameter tip for TAB, BGA, and other ultra fine pitch rework. The tip is either straight (SH-341) or 50? angled a
Parts & Supplies | Pick and Place/Feeders
Yamaha CL feeder We can supply YAMAHA different models feeder with competitive prices and good quality, and the serials includs CL, FV, SS, FT with the different speci We can supply YAMAHA different models feeder with competitive prices and good
Technical Library | 2023-01-17 17:50:59.0
Heller's new Condenser Tube Flux Recovery System is designed to provide more efficient flux collection than earlier Heller flux collection systems; while providing minimal down time for inspection and cleaning. The entire system easily fits within the rear of the top shell of an 1800-EXL oven. The system utilizes a different set of top shell caps specially designed to provide the best serviceability of both the flux collection system and maintenance of the heater zone blower motors.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulations, LED En
When Applications Require Large Board Processing &/or Versatility The DS Series of dispensers is a robust, large format platform designed to handle all types of applications with ease. Ideal for dispense applications utilizing adhesive, solder paste
Training Courses | | | IPC J-STD-001 Trainer (CIT) Recert.
The Certified IPC J-STD-001 Trainer (CIT) recertification courses are intended for those individuals who were previously accredited to provide Certified IPC J-STD-001 (CIS) training.
Training Courses | | | IPC-A-610 Trainer (CIT) Recert.
The Certified IPC-A-610 Trainer (CIT) recertification courses are intended for those individuals who were previously accredited to provide Certified IPC-A-610 Specialist (CIS) training.
Events Calendar | Tue Dec 03 00:00:00 EST 2019 - Tue Dec 03 00:00:00 EST 2019 | Anaheim, California USA
IPC Tech Ed - Process and Acceptability Requirements: Utilizing J-STD-001 and IPC-A-610 Together
Events Calendar | Thu Feb 20 00:00:00 EST 2020 - Thu Feb 20 00:00:00 EST 2020 | Manchester, New Hampshire USA
IPC Tech Ed - Process and Acceptability Requirements: Utilizing J-STD-001 and IPC-A-610 Together
Career Center | Bedford, Texas USA | Engineering
Responsibilities include: Create packages for capital equipment and justification, design and fabricate assembly tooling, support SMT assembly line, DOE's, and capacity analysis. Required experience to include: BS in Manufacturing/Mechanical/IE an
Career Center | Dallas, Texas USA | Engineering
Skills/Requirements: BS Electronics Eng, 3+ years working with PC based products, knowledge of PC motherboards, chip sets, processors, PCI DRAM, I/O parts, Internal PC sub-assemblies, PC 99, PC2000, PCI and Windows. Duties/Functions: System quotes, s
Career Center | Valencia, California | Clerical,Production,Quality Control
I worked for AMS Fulfillment for 13 years, working in differents departments doing pick & pack, scanner, Data entry of WAMS, In Process, Credit Memos, Inventory transactions,QC, Labeling, Production, team assembler, also as General worker applying f
Career Center | palakkad, India | Technical Support
I had 4 years experience 3 years in SMT Field and 1 year in Stock Market I have well experience in SMT process and machine Knowledge personally I have well knowledge on reflow, SPI,DEK AOI I can handle the process related issues and tackle the situa
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_smd-crystal-naming-convention_topic2080.xml
. SMD Crystal Naming Convention : Hi guys,the naming of Crystal... Author: BennsPCBSubject: 2080Posted: 06 Feb 2017 at 4:01amHi guys,the naming of Crystal SMD footprint in LE differs from B and proposed C versions of 7351 doc.from (proposed) IPC-7351C: Crystals (2 leads) ................................XTAL
Imagineering, Inc. | https://www.pcbnet.com/blog/what-is-the-pcb-assembly-process/
. The PCB assembly process differs from PCB fabrication. While PCB fabrication focuses on producing panels through laminating layers of fiberglass, epoxy, and copper, a PCB cannot function until component parts are attached to the surface
.gif)
