Electronics Forum | Mon Jul 24 11:35:42 EDT 2006 | Jimk@ics-inc.org
We have experienced a problem with tin leaching or discoloration of lead terminals on random parts on solder side of a paste/paste operation. The profile has been used on previous production runs and there doesn't appear to be any heat damage to othe
Electronics Forum | Tue Oct 27 05:51:28 EST 1998 | jacqueline coia
Could you please tell what are the current avaliable standards, if any (BSI/IPC) for a measurement value on the mechanical pull strength on SMT IC leads after reflow. Thanks in advance, Jack.
Industry News | 2019-03-10 20:30:11.0
The proliferation of tighter microvia densities and signal integrity requirements in printed boards within the electronics industry has revealed reliability concerns with microvia structures in high performance products. A number of IPC OEM member companies have approached IPC with examples of microvia failures in high-profile hardware that were not observed until after bare printed board fabrication, inspection and acceptance, including:
Industry News | 2015-05-18 21:19:33.0
The SMTA Capital Chapter is pleased to announce it will welcome Denis Barbini, Universal Instruments Corporation, on June 9th to instruct a tutorial on Advanced SMT Technologies at ZESTRON Americas located at 11285 Assett Loop, Manassas, VA 20109. The tutorial is scheduled from 9:00 am to 4:30 pm and includes lunch. The following should attend: quality engineers, failure analysis engineers, reliability engineers, procurement specialists, design engineers, process engineers, project managers. Registration is required for this learning event.
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Career Center | , Israel | Engineering,Maintenance,Technical Support
I was born on June , 1972 in Khmelnitsky city , Ukraine . I am male. From 1979 to 1987 I was studying at secondary school #7, having finished which I entered the Technical College of Khmelnitsky in specialty Machine Tools with Computer Numeric Contr
Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. Effects of reflow profile and thermal conditioning on intermetallic compound thickness for SnAgCu soldered joints. The purpose
| http://etasmt.com:9060/te_news_industry/2013-04-28/4161.chtml
(1621) What are the advantages of use nitrogen process for SMT reflow oven? (22) Lead-free processes propose new requirements on reflow soldering quality (17
Heller Industries Inc. | https://hellerindustries.com/kic/
. Increased reflow oven equipment utilization leads to lower cost + faster shipments. Learn more about Auto-Focus Power™ Profiling Software on the KIC’s website »» help
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
2481 Hilton Drive
Gainesville, GA USA
Phone: (770) 538-0411