New Equipment | Assembly Services
TG-1000 Hot Bar Bonding System TG-1000 is a feature rich, floor standing bonding system designed for process development and high mix production environments. Standard features include: • Floor standing base frame & leveling legs with righ or left
New Equipment | Rework & Repair Equipment
The EXPERT 10.6 systems are rework stations that handle the complete rework process for SMDs. All versions utilize Auto Vision Placement Technology and are expandable with residual solder removal and dispensing functions. EXPERT 10.6 HXV - Syste
Electronics Forum | Tue Apr 27 23:10:16 EDT 2010 | mbrunton
I am looking at buying a pick and place machine to assemble the circuit boards we make. Most of the boards are small (2 to 10 square inches), most are 2 sided, and have maybe 20-50 parts per side. I use mostly 0805/0603 chips, SOT-23, SOD-123, SOIC
Electronics Forum | Thu Dec 17 10:04:28 EST 1998 | Chrys
Necessity is the mother of invention... The other day I loaned my last bit of high-temp solder to a co-op and never saw it again. Then I had to run a profile and I was in a pickle with no solder. So I ran out to the local Radio Shack to see if the
Industry News | 2003-04-08 10:28:06.0
A new range of high-performance press-fit D-subminiature terminations from GTK can be fitted easily to PCBs without the need for solder.
Industry News | 2016-04-20 10:27:40.0
BEST, Inc. was presented Circuit Assembly’s NPI Award for its HeatShield Gel™ high temperature shielding product at the IPC APEX Expo on Feb. 24 in San Diego, Calif.
Technical Library | 2021-11-03 16:52:47.0
This paper proposes the integration of pulsed photonic sintering into multi-material additive manufacturing processes in order to produce multifunctional components that would be nearly impossible to produce any other way. Pulsed photonic curing uses high power Xenon flash lamps to thermally fuse printed nanomaterials such as conductive metal inks. To determine the feasibility of the proposed integration, three different polymer additive manufacturing materials were exposed to typical flash curing conditions using a Novacentrix Pulseforge 3300 system. FTIR analysis revealed virtually no change in the polymer substrates, thus indicating that the curing energy did not damage the polymer. Next, copper traces were printed on the same substrate, dried, and photonically cured to establish the feasibility of thermally fusing copper metal on the polymer additive manufacturing substrates. Although drying defects were observed, electrical resistivity values ranging from 0.081 to 0.103 Ω/sq. indicated that high temperature and easily oxidized metals can be successfully printed and cured on several commonly used polymer additive manufacturing materials. These results indicate that pulsed photonic curing holds tremendous promise as an enabling technology for next generation multimaterial additive manufacturing processes.
General of machine: 1.The in line curing machine (ICM Series) is idea for high volume curing production.They are easy to integate with different Conformal Coating machines. 2.Available in different lengths,they provide the flexibility to match your
General of machine: 1.The in line curing machine (ICM Series) is idea for high volume curing production.They are easy to integate with different Conformal Coating machines. 2.Available in different lengths,they provide the flexibility to match your
Career Center | binan city, Laguna Philippines | Engineering,Maintenance,Technical Support
6.5 Years Experience in Semiconductor Industry Specializing in Dispensing process and Equipment. 5.0 Years of Experience in Field Service Engineering. Machine Commissioning / Customer support 24 / 7, Technical Support for Customer machine and process
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/adhesive-dispensing-systems/additional-filter-product-subtype/temperature-controls?con=t&page=21
Temperature Controllers For Production Flexibility And Efficiency | Nordson Adhesive Dispensing Systems Adhesive Dispensing Systems Corporate | Global Directory
ASCEN Technology | https://www.ascen.ltd/Blog/machine/Conformal_coating_machine/1004.html
contaminants.the conformal coating is a thin, it can be removed easily with most common solvents.Use High Performance Conformal Coating machine for PCB spray that is the most efficient way of coating a
