Industry Directory | Manufacturer
ASLi main products: Temperature (humidity) chamber, Thermal Shock Test Chamber, Sand and Dust Tester , Rain Spray Tester, UV Chamber, Ozone Chamber, Xenon Climate Chamber , Salt Spray Corrosion Chamber, High Temperature (Vacuum )
Industry Directory | Manufacturer
environmental test chamber manufacturers and vibration test system suppliers. Including climate test chamber, thermal shock test chamber, stability test chamber, ESS chamber, walk-in test chamber, altitude test chamber,
All electronic hardware is susceptible to the damaging effects of moisture, temperature, and contaminants. STI understands the criticality of reliability testing and test-to-failure. Improper selection of assembly materials and manufacturing processe
New Equipment | ESD Control Supplies
Humidity Control System for static elimination....dust suppression...overall production management. Each system has its own built in Humidistat and Controller. You simply set the Controller at the desired %Rh you wish to maintain within the room and
Electronics Forum | Fri Aug 11 15:01:24 EDT 2000 | g cronin
I am looking for a storage system for short term storage of open BGA's or longer term de-humidifying or moisture removal.. Is there any low humidity chambers available??? greg
Electronics Forum | Fri Nov 20 14:50:13 EST 2009 | davef
One of our instruments has a high impedance front-end. We: * Passed functional test in the environmentally controlled shop. * Failed test, on the same unit, while carrying it to burn-in chambers in an uncontrolled part of the plant. Solder flux resi
Used SMT Equipment | Drying Equipment
ESPEC TEMPERATURE CHAMBER (VERTICAL TYPE) Model: PV-331 Serial No: 221006126 Power: AC 300V Source: 50/60 Hz MAX. 20A Weight: 325kg Date: 2005
Used SMT Equipment | General Purpose Equipment
HI , We have one set of Espec PU4KP temperature chamber for sale . No humidity. Year 2001 If any interest, pls contact me.
Industry News | 2015-07-28 10:36:48.0
EMS provider Canadian Inc. Energy Group in Laval, Quebec; Canada will be liquidating some of their excess and unused assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 8:00am EST on August 10, 2015 and the closing will begin at 1:00pm EST on August 12, 2015.
Industry News | 2016-10-10 10:59:34.0
Sypris Electronics will be liquidating some of their assets utilizing the online auction services of Baja Bid. The bidding for this event will open promptly at 7:00am EDT on october 24, 2015 and the closing will begin at 11:00am EDT on November 11, 2016.
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Technical Library | 2019-11-17 22:46:45.0
Overview of walk-in temperature and humidity chamber: It also belongs to environmental test equipment, it tests whether the product can resist high temperature, low temperature, humidity, or the physical and chemical changes produced under extreme conditions, the walk-in temperature and humidity chamber volume is large, the product is placed, or a large object can be placed, such as automobile, new energy, television and liquid crystal screen, etc. How to do the routine maintenance of the walk-in temperature and humidity chamber: 1. The wet gauze basically, if there is no special case, s/b usually changed once in 3 months 2. The water channel shall be regularly cleaned, including water cup, water tank, etc., so as to prevent the water from being blocked,affect the humidity test. 3. It is forbidden to test the flammable and explosive products inside working room. 4. Clean the chamber on a regular basis 2. How to operate walk-in temperature and humidity chamber: The operation method is same as standard temperature humidity test chamber,the controller is 7-inch LCD programmable color screen, you only need to setthe temperature point---test time--how many cycles need to be tested, This can be done automatically, and the machine will stop automatically when it is complete. If there is any problem during the operation, the corresponding problem point will be displayed on the machine control screen. Walk-in temperature and humidity chamber is a must equipment for reliability test of Automobile,Aerospace,Electronic parts,etc,the operation and maintenance are easy,it is teh tear down mahcine,Climatest engineers will be dispatched to do on-site support,for instance,we will finish commissioning,train customers how to operate,maintain,welcome to follow our company facebook page:https://www.facebook.com/Climatechambers
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
The first technology to use centrifugal energy to clean electronic circuit assemblies, precision parts, and semiconductor packages. The system offers unparalleled penetration, solubilization, and contaminant removal The MicroCel Centrifugal Cleanin
Baja Bid | https://bajabid.com/auctions/page/7/
; Despatch EC319 Environmental Chamber; Blue M POM7-256C Environmental Chamber; Espec PXA-3AP Environmental Chamber; Thermotron SM-8C Environmental Chamber
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=5027
. In this work, we present synergistic effect between Cl2 and H2S on Ag corrosion rate in the MFG. We also investigated effects of relative humidity (RH
