Industry Directory | Manufacturer
Manufacturer of PCB laminates. The products includes full series of FR-4 copper clad laminates, prepreg,CEM-1,CEM-3, etc.
Industry Directory | Manufacturer
Mica-AVA (Far East) Industrial Ltd (MAF) cooperate with Hitachi Chemicals manufactures high reliability, high-quality and quick-turn laminate FR4 products (Normal, High Tg and Halogen free)
New Equipment | Fabrication Services
Aluminum PCB & Metal Core PCB & LED PCB Circuit board Aluminium PCB are metal-based, copper-clad laminates with a good heat dissipation function. Usually, Aluminium PCB is refer to LED PCB board, which is the most important part of LED display and l
New Equipment | Rework & Repair Equipment
BEST HotDots™ are designed to simply and cleanly attach jumper wires on a board. HotDots™ are built to survive at high temperature as both the adhesive and the polyimide material are designed to withstand wash and reflow temperatures. HotDots™ are a
Electronics Forum | Mon Nov 15 21:35:50 EST 1999 | Dave F
Bob Bob: Fortunately, you found this before you built-up a lot of product. Some thoughs and other drivel: 1 Use IPC-TM-650, Method 2.4.8 for copper peel with a Instron machine. Typical pad peel strength requirement for FR-4, 2 oz. copper is: 6 l
Electronics Forum | Mon Nov 07 16:34:55 EST 2005 | CW
If I am putting chip capacitors on a .063 FR4 board, what size package should we stay away from to avoid cracking? If I use 2 mil copper on the outside layers of a PCB, am I limited to what pitch of parts I can use? Specifically, will using 0603
Used SMT Equipment | Depanelizers / Routers
Jot Automation J501-57 (2010) Laser Depaneling Cell Brand: Jot Automation Model: J501-57 Year: 2010 Description: Laser Depaneling Cell Standard Features • CO2 laser • Cutting beam from top side • Cutting nozzle moved by upper robot axes •
Used SMT Equipment | Turnkey Lines
Up for Sale: 1x Jot Automation J501-57 Laser Depaneling Cell. Has been stored in a temperature controlled environment since last time used. In Mint conditions Priced for quick sale. Brand: Jot Automation Model: J501-57 Year: 2011 Descriptio
Industry News | 2014-10-01 15:59:00.0
PCB provider Cirtech Electronics located in Cape Town, South Africa will be liquidating their assets utilizing the online auction services of GoIndustry and Baja Bid. Bidding for the auction will open promptly at 8:00am PDT on October 7th, 2014 and will begin closing at 6:00am PDT on October 14th, 2014.
Industry News | 2014-10-10 16:27:51.0
CB provider Cirtech Electronics will be liquidating their assets utilizing the online auction services of GoIndustry and Baja Bid.
Parts & Supplies | Assembly Accessories
PC12P Inventory Material: Copper Clad FR4, Single Sided, 2 oz. Series: - Size Dimension: 18.00" x 12.00" (457.4mm x 304.8mm) Board Thickness: 0.062" (1.57mm) 1/16" Proto Board Type: Copper Clad, Positive Sensitized PC12P-E RFQ
Parts & Supplies | Circuit Board Assembly Products
1). FR-4 Material 2). 2 layer, 1.2mm thick 3). 5 oz copper weight. 4). LPI Green solder mask/White silk screen 5). Immersion gold over nickle
Technical Library | 2016-09-08 16:27:49.0
In this investigation a test matrix was completed utilizing 900 electrodes (small circuit board with parallel copper traces on FR-4 with LPI soldermask at 6, 10 and 50 mil spacing): 12 ionic contaminants were applied in five concentrations to three different spaced electrodes with five replicas each (three different bare copper trace spacing / five replications of each with five levels of ionic concentration). The investigation was to assess the electrical response under controlled heat and humidity conditions of the known applied contamination to electrodes, using the IPC SIR (surface insulation resistance) J-STD 001 limits and determine at what level of contamination and spacing the ionic / organic residue has a failing effect on SIR.
Technical Library | 2021-07-20 20:02:29.0
During the manufacturing of printed circuit boards (PCBs) for a Flight Project, it was found that a European manufacturer was building its boards to a European standard that had no requirement for copper wrap on the vias. The amount of copper wrap that was measured on coupons from the panel containing the boards of interest was less than the amount specified in IPC-6012 Rev B, Class 3. To help determine the reliability and usability of the boards, three sets of tests and a simulation were run. The test results, along with results of simulation and destructive physical analysis, are presented in this paper. The first experiment involved subjecting coupons from the panels supplied by the European manufacturer to thermal cycling. After 17 000 cycles, the test was stopped with no failures. A second set of accelerated tests involved comparing the thermal fatigue life of test samples made from FR4 and polyimide with varying amounts of copper wrap. Again, the testing did not reveal any failures. The third test involved using interconnect stress test coupons with through-hole vias and blind vias that were subjected to elevated temperatures to accelerate fatigue failures. While there were failures, as expected, the failures were at barrel cracks. In addition to the experiments, this paper also discusses the results of finite-element analysis using simulation software that was used to model plated-through holes under thermal stress using a steady-state analysis, also showing the main failure mode was barrel cracking. The tests show that although copper wrap was sought as a better alternative to butt joints between barrel plating and copper foil layers, manufacturability remains challenging and attempts to meet the requirements often result in features that reduce the reliability of the boards. Experimental and simulation work discussed in this paper indicate that the standard requirements for copper wrap are not contributing to the overall board reliability, although it should be added that a design with a butt joint is going to be a higher risk than a reduced copper wrap design. The study further shows that procurement requirements for wrap plating thickness from Class 3 to Class 2 would pose little risk to reliability (minimum 5 μm/0.197 mil for all via types).Experimental results corroborated by modeling indicate that the stress maxima are internal to the barrels rather than at the wrap location. In fact, the existence of Cu wrap was determined to have no appreciable effect on reliability.
Guillotine type V-cut PCB Cutting Machine Product Description 1. For internal strength generates during separation, Minimize it to value under 180uE ,to avoid solder crack or component damage 2. Able to separate edge of V-slot, minimum distance to
Two-axis PCB Separator ML-850 Features。 ● Suitable for verically designed PCB with V-scored groove. ● 49 sets of PCB data can be stored. ● PCB material:FR4.Aluminum,Copper.etc. ● Dust collection system optional. ● X-axis and Yaxis bladeunits llow fo
Career Center | Shen Zhen, China | Management,Sales/Marketing
Working in GLORYPCB for 10 years.knowing electronic supply chain very well. especially for PCB PCBA assembly and other Electronic Manufacturing Service.Glorypcb is a professional electronic manufacturer located in Shenzhen with three facilities.offe
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/dage/test-types/peel-testing?con=t&page=8
Peel Testing | Nordson DAGE X-Ray Inspection and Test Products Corporate | Global Directory | Languages Division Only All of Nordson Home Products Bondtesting Systems Micro Materials Testing Wafer Inspection and Metrology X-ray Inspection Systems X-ray Counting Systems Applications Battery
