Electronics Forum | Fri Jul 09 23:45:22 EDT 2010 | dman97
I have a CP642 machine that always gives me a Station 17 or Station 19 nozzle error when the machine selects the 2.5mm 3.7mm or 5.0mm nozzles. It always throws an unknown nozzle station 17 error after all the heads have switched to the above mention
Electronics Forum | Sun Jul 11 21:10:27 EDT 2010 | fujiphil
First, check the sensors for 17th and 19th station....tune the sensor amplifier if necessary. Then, check the dogs on the nozzle holders... If the above, items are ok... check the 13th station clutch engagement. Calibrate if necessary... fujiphil
_1.JPG)
Parts & Supplies | Pick and Place/Feeders
Fuji Stopper DNPH2100 of XP142 XP143 A lot of FUJI CP6 /CP643/CP7/XP/NXT/IP3 original stock parts: 1. CP642/CP643 X-axis servo box; CP643 Z, FQ, FRQ, NC*** and second-hand axis servo box. 2. CP6/CP642/CP643 original cutting knife, movable knife:
_1.JPG)
Parts & Supplies | Pick and Place/Feeders
FUJI XPF mark hook AGGPH8880 A lot of FUJI CP6 /CP643/CP7/XP/NXT/IP3 original stock parts: 1. CP642/CP643 X-axis servo box; CP643 Z, FQ, FRQ, NC*** and second-hand axis servo box. 2. CP6/CP642/CP643 original cutting knife, movable knife: WPK0312
| http://www.thebranfordgroup.com/DNN3/Auction/SENN0423.aspx
-Nozzle Head Panasonic CM602 Placement Machine, 8-Nozzle Head Promation SCGV-88-M Drop Gate Conveyor Vitronics XPM2 Reflow Oven Viscom S6055 II AOI Promation SCBL-77-XL Buffer Stacker Promation ECC-700A
