Utilise Gold contains an international business directory of suppliers of precious metal materials used in the electronics industry, including contacts, plating salts, pastes, solders, bonding wires and evaporation materials.
Industry Directory | Manufacturer
US manufacturer of metallized ceramic substrates & packages; specializing in PCTF (plated copper over thick film) & low cost AgENIG (silver with electroless nickel and immersion gold plating).
New Equipment | Rework & Repair Equipment
The BEST Gold Contact Replating Kit includes the tools you need for fast replating and modification of circuit contacts. Edge contacts may require replating if they are contaminated with solder or become scratched during handling or do not meet the m
New Equipment | Rework & Repair Equipment
BEST circuit frames come in both dry film and epoxy versions. We can produce circuit frames in 1 and 2 oz copper as well as with shiny tin or nickle gold coating. These circuit frames are microetched on the board side in order to insure better adhesi
Electronics Forum | Thu Aug 21 22:10:07 EDT 2003 | adlsmt
Well, for some reason the board house will pay for the boards but has some issue with paying for the parts on them. Why am I not supprised? Perhaps I have mis-diagnosed the problem. We have found two different board p/n's with the same type of defec
Electronics Forum | Fri Aug 22 09:49:31 EDT 2003 | davef
Ask your supplier for a corrective active and failure analysis of the boards. In parallel, send the boards to a failure analysis laboratory to determine the material on your gold pads. Take your work to another supplier.
Used SMT Equipment | AOI / Automated Optical Inspection
OMRON AOI VT-RNS2-L Omron AoiVT-RNSⅡ parameters Hardware part LSIZE Image signal input part Camera 3CCD camera Lighting series Ring LED (R.G.B) Image resolution 10, 15, 20um Mechanism part Transmission method Belt transmission method Producti
Used SMT Equipment | Screen Printers
Ekra Type model – X5 Serial-Number – X5 01089 Alignment Repeatability - +12.5 µm@6sigma Printing speed - 9mm/sec to 200mm/sec Printing pressure – 0kg to 26kg Frame size – 736mm*736mm*38mm Pr
Industry News | 2003-05-19 10:06:43.0
The PCB is available with a maximum panel size of 406-by-460mm and a minimum board thickness of 0.8mm.
Industry News | 2003-04-29 08:27:33.0
Emerson Energy Systems is using Weidmuller's Minimate S2L/B2L PCB connector for its IMT 2000 multifunction unit, thanks to its space saving design and competitive price.
Parts & Supplies | SPI / Solder Paste Inspection
Quick programming, friendly programming interface Multiple measurement methods True one-button measurement Eight-way motion button, one-click focus Adjustable scanning pitch Solder paste 3D simulation function Powerful SPC function MARK
Parts & Supplies | SMT Equipment
Juki 750 101 smt nozzle Description: Brand:JUKI Color:plated gold Material:imported steel Nozzle model:101 102 103 104 105 106 Application:Juki 750 smt machine Customize:yes Nozzle advantage: 1.The nozzle main body adopts imported steel, i
Technical Library | 1999-05-07 11:28:39.0
There are many things that can go wrong when soldering to gold plate over nickel surfaces. First of all, we know that gold and solder are not good friends, as any time solder comes into contact with gold, something seems to go wrong. Either the solder bonds to the gold and eventually pulls off as the tin and gold cross-migrate, leaving voids; or the solder completely removes the gold and is expected to bond to the metal which was under the gold.
Technical Library | 2014-08-07 15:13:44.0
Gold embrittlement in SnPb solder is a well-known failure mechanism in electronic assembly. To avoid this issue, prior studies have indicated a maximum gold content of three weight percent. This study attempts to provide similar guidance for Pb-free (SAC305) solder. Standard surface mount devices were assembled with SnPb and SAC305 solder onto printed boards with various thicknesses of gold plating. The gold plating included electroless nickel immersion gold (ENIG) and electrolytic gold of 15, 25, 35, and 50 microinches over nickel. These gold thicknesses resulted in weight percentages between 0.4 to 7.0 weight percent.
we have many universal gold plus feeders to sell . www.smt-store.com
we have many universal gold plus feeders to sell . www.smt-store.com
Training Courses | | | PCB Rework and Hand Soldering Courses
The PCB rework and hand soldering courses courses cover techniques of rework and repair of PCBs, BGAs and other electronics assemblies, and teach fundamentals of soldering of electronics assemblies.
Training Courses | | | Other Courses
Other courses related to electronics manufacturing and assembly
Events Calendar | Tue Feb 12 00:00:00 EST 2019 - Tue Feb 12 00:00:00 EST 2019 | ,
Webinar: BGA and Area Array Process Defects - Causes & Cures
Events Calendar | Wed Sep 11 00:00:00 EDT 2024 - Wed Sep 11 00:00:00 EDT 2024 | San Diego, California USA
San Diego Chapter In-Person Event: Reclaiming Precious Metal from SMT Scrap
Career Center | Dana Point, California USA | Sales/Marketing
We are currently seeking sales reps nationwide for this rapidly growing supplier of printed circuit boards (since 1986)with facilities in southern CA and eight PCB facilities in China and Taiwan, all ISO 9002 certified and UL94V-0 approved, some are
Career Center | Houston, Texas USA | Engineering,Management,Quality Control,Technical Support
Seasoned Process & Quality Engineer. Degreed Chemical Engineer. 20+ years in Electronics Semiconductor manufacturing. Proficient in Quality Statistical tools, Design of Experiments, FMEAs, APQP, PPAP, ISO 9000, ISO/TS 16949 etc.
Career Center | Alta Loma, California | Engineering,Quality Control,Research and Development
Rigid and Flexible Printed Circuits Plating and Metal Finishing Operations Six Sigma Work Instruction Documentation Process Development Equipment Selection and Specification New Facility Startup Air, Water and Hazardous Waste Environmental Reporting
SMT Express, Issue No. 2 - from SMTnet.com Volume 1, Issue No. 2 Wednesday, July 14, 1999 Featured Article Continued From Previous Page PRINTED CIRCUIT BOARD FABRICATION BASICS AN OUTLINE Earl Moon Proof Of Design (POD) 8. PLATING (AND
| http://etasmt.com/cc?ID=te_news_industry,24564&url=_print
How to Prevent Non-Wetting Defect during the SMT Reflow Process-SMT Technical-Reflow oven,SMT Reflow Soldering Oven-cmsadmin Reflow oven,SMT Reflow Soldering Oven 当前位置: Home >> News
Imagineering, Inc. | https://www.pcbnet.com/quote/board-quote-taiwan/
* Materials FR4(130Tg) FR4(170Tg) FR406(180Tg) Copper Weight 1 oz 2 oz 3 oz 4 oz Finish Plating ENIG1U" (Immersion Gold) ENIG2U" (Immersion Gold) ENIG3U" (Immersion Gold) ENIG4U" (Immersion Gold) ENIG5U" (Immersion Gold) Immersion Tin Immersion Silver HASL