Industry Directory | Manufacturer
Suppliers of solder pastes, wave soldering liquid fluxes and SMT adhesives and cored solder wires for all soldering requirements.
Industry Directory | Manufacturer
The exclusive supplier of SIPAD Solid Solder Deposit in North America and the only SIPAD Solid Solder Deposit (SSD) coating service bureau in the world.
- Higher power optimizes temperature control. Suitable for high melting point requirement of lead- free solder�� - Soldering iron with built-in suction that effectively absorbs poisonous fumes produce during the process of soldering. It also purifies
New Equipment | Solder Materials
Sn63/Pb37 Electropure™ is a high purity alloy that is composed of 63% tin and 37% lead. Electropure is alloyed in a proprietary method that results in a low drossing, high wetting solder. The Electropure process reduces suspended oxides in the solde
Electronics Forum | Tue May 13 07:04:54 EDT 2014 | hemant_pang23
I am looking for the solder wire leaded or lead free which can withstand the solder joint at temperature 450deree Celsius or more after soldering, since i need to form a solder joint at higher temperature area Pls suggest the part number for the sam
Electronics Forum | Tue May 13 07:40:14 EDT 2014 | sarason
There are many alloys of silver solder for higher temperatures mostly used in plumbing There are also alloys which are available in paste form used in the manufacture of hybrids. sarason
Industry News | 2018-10-18 09:34:29.0
Application of lead-free solder
Industry News | 2018-10-18 08:21:10.0
How to Prevent Non-Wetting Defect during the SMT Reflow Process
Technical Library | 2014-06-23 14:50:52.0
It was unusual to see chip terminations change colors when tin lead solders were used but with the introduction of lead free reflow soldering and the corresponding increases in reflow temperatures terminations are now changing colors. Two conditions are present when reflow temperatures are increased for lead free solder alloys that leads to discoloration. Reflow temperatures are above the melting point of tin (Sn MP is 232oC). Air temperatures commonly used in forced convection reflow systems are high enough to both melt the tin plating on the termination allowing it to be pulled into the solder joint due to solder joint liquid solder surface tension leaving behind the exposed nickel barrier. Now those metal oxide colors will be visible due to high air temperatures during reflow.
Technical Library | 2015-11-19 18:15:07.0
The move to lead free (Pb-free) electronics by the commercial industry has resulted in an increasing number of ball grid array components (BGAs) which are only available with Pb-free solder balls. The reliability of these devices is not well established when assembled using a standard tin-lead (SnPb) solder paste and reflow profile, known as a backward compatible process. Previous studies in processing mixed alloy solder joints have demonstrated the importance of using a reflow temperature high enough to achieve complete mixing of the SnPb solder paste with the Pb-free solder ball. Research has indicated that complete mixing can occur below the melting point of the Pb-free alloy and is dependent on a number of factors including solder ball composition, solder ball to solder paste ratio, and peak reflow times and temperatures. Increasing the lead content in the system enables full mixing of the solder joint with a reduced peak reflow temperature, however, previous research is conflicting regarding the effect that lead percentage has on solder joint reliability in this mixed alloy solder joint.
· What is the difference between SMT vacuum reflow soldering machine and ordinary reflow soldering machine? · What problems can be solved by smt vacuum reflow soldering machine? · What is the basic principle of vacuum reflow machine? · Ho
Lyra Reflow Oven is a soft soldering that realizes the mechanical and electrical connection between the solder ends of surface mount components or the pins and the printed board pads by remelting the solder paste pre-distributed on the printed board
Events Calendar | Mon Apr 23 00:00:00 EDT 2018 - Thu Apr 26 00:00:00 EDT 2018 | Shanghai, China
SMTA China East Conference 2018
Events Calendar | Wed Dec 06 00:00:00 EST 2017 - Wed Dec 06 00:00:00 EST 2017 | San Jose, California USA
Technology Seminar - a new low melting point solder alloy that improves quality, lowers costs and maximizes equipment efficiency
SMTnet Express, July 1, 2015, Subscribers: 22,969, Members: Companies: 14,445, Users: 38,464 Reliability Screening of Lower Melting Point Pb-Free Alloys Containing Bi Joseph M. Juarez, Michael Robinson, Joel Heebink; Honeywell International
SMT Express, Volume 2, Issue No. 3 - from SMTnet.com Volume 2, Issue No. 3 Thursday, March 16, 2000 Featured Article Return to Front Page Curtailing Voids in Fine Pitch Ball Grid Array Solder Joints by Gary Morrison and Kevin Lyne
Blackfox Training Institute, LLC | https://www.blackfox.com/blackfox-courses/high-temp-soldering/
care, ESD, safety, and general requirements for soldering electronic assemblies. There are many situations in electronics manufacturing where it is necessary to use high melting-point solder
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/efd/resource-center/solder-selection-guide
(Restriction of Hazardous Substances) directive and sometimes it is a corporate directive. Some applications that fall under the RoHS directive are exempt from being lead-free because the reflow temperature requirements can only be met with high-lead solder alloys which are exempt under RoHS regulation
.gif)
winsouce.jpg)