Viconics� mission is to provide value and innovation in microcomputer-based temperature and humidity controls for the commercial HVAC market. Products range are controls, from thermostats and humidistats to sophisticated heat pump controls.
Manufactures a wide range of environmental test solutions capable of temperature and humidity cycling, thermal shock, production stress screening, accelerated stress testing, combined environment testing, controlled humidity exposure.
New Equipment | Board Handling - Storage
Eureka XDC-2001 Fast Super Dryer Ultra Low Humidity Dry Cabinet Specs http://www.eurekadrytech.com/fast-super-dryer/xdc-2001 Anti-static Glass, Anti-static Paint on Body and Shelves, Anti-static Caster / Stands, 1 M ω Ground Wire Capacity: 1314 L
New Equipment | Board Handling - Storage
Eureka Dry Tech XDC-1001 Fast Super Dryer Ultra Low Humidity Dry Cabinet Specs: http://www.eurekadrytech.com/fast-super-dryer/xdc-1001 Capacity: 657 Liters Humidity Range: LESS THAN 5% Recovery Time: Recovers to ≤ 5% RH within 30 minutes after acce
Electronics Forum | Wed Feb 02 06:58:07 EST 2011 | mikeyjryan
Hello, The company I work for are located in the North of Spain and the humidity levels in the factory range from 10 to 60 %RH. We have concerns about the low humidity effects on our ESD controls and want to invest in a system to keep the humidity a
Electronics Forum | Fri Aug 23 03:32:12 EDT 2013 | pradeep_selec
Can anybody help & confirm the Humidity & Temperature Range to be maintained on SMT SHopfloor according to the IPC standard & its IPC standard number. Also the ways to compensate the humidity if its out of range; low cost / natural method.
Used SMT Equipment | Screen Printers
2.0 Cmk @ ± 12.5 μm (± 6 sigma) System alignment capability > 2.0 Cmk @ ± 25 μm (± 6 sigma) Optimum core cycle time 8 seconds Substrate size 50 mm (X) x 40.5 mm (Y) to 620 mm (X) x 508.5 mm (Y) Operating System Windows 7 Embe
Used SMT Equipment | AOI / Automated Optical Inspection
BF-Frontier is used in the inspection of large-size printed circuit boards. In this device, the unique control sequence of software and hardware, accelerated scanning mode and stable optical illumination system can allow BF-Frontier to easily complet
Industry News | 2003-07-02 08:54:26.0
A novel unreinforced, thermally conductive, pressure sensitive adhesive tape delivers very high bond strength to low-energy surfaces.
Industry News | 2019-10-16 14:45:19.0
MIRTEC announces that the company will premier its all-new ALPHA 3D Automated Optical Inspection System at productronica 2019. New to this event, Messe München and Konradin Verlag have organized a 3D AOI Arena in Hall A2. Leading 3D AOI manufacturers such as MIRTEC will demonstrate their latest 3D Inspection Technology at this four-day event scheduled to take place Nov. 12-15, 2019, at the Munich Trade Fair Center in Munich, Germany.
Parts & Supplies | SMT Equipment
The AEC series is an ideal standard aluminum electrolytic capacitors in a broad range of consumer, industrial and automotive electronics applications requiring extend life , extended temperature range , and low profile . The ROHS-compliant series c
Parts & Supplies | SMT Equipment
The AEC series is an ideal standard aluminum electrolytic capacitors in a broad range of consumer, industrial and automotive electronics applications requiring extend life , extended temperature range , and low profile . The ROHS-compliant series c
Technical Library | 2019-04-11 05:59:57.0
Are your MSD safely stored? As humidity is found to be one of the key reasons for rejected products, many manufacturers are taking measures to control the humidity to increase their production efficiency and save the cost. In the industries of semi-conductor and electronics, the key section in which the rejected products are most probably to be made is that during the heating process of SMT, the IC(e.g.,PBGA,BGA,or TQFD) is likely to crack and thus cause non-effective welding because of the humidity. Climatest Symor® auto dry cabinet is the best solution to avoid the cracking and non#2;effective welding by dehumidifying the surface of your components. The dry unit can be used for 20 years without replacement,and controller is calibration free within 5 years.We attach dry cabinet application with different humidity range,welcome to download.
Technical Library | 2018-05-09 22:15:29.0
Creep corrosion on printed circuit boards (PCBs) is the corrosion of copper metallization and the spreading of the copper corrosion products across the PCB surfaces to the extent that they may electrically short circuit neighboring features on the PCB. The iNEMI technical subcommittee on creep corrosion has developed a flowers-of-sulfur (FOS) based test that is sufficiently well developed for consideration as an industry standard qualification test for creep corrosion. This paper will address the important question of how relative humidity affects creep corrosion. A creep corrosion tendency that is inversely proportional to relative humidity may allow data center administrators to eliminate creep corrosion simply by controlling the relative humidity in the data center,thus, avoiding the high cost of gas-phase filtration of gaseous contamination. The creep corrosion relative humidity dependence will be studied using a modified version of the iNEMI FOS test chamber. The design modification allows the achievement of relative humidity as low as 15% in the presence of the chlorine-releasing bleach aqueous solution. The paper will report on the dependence of creep corrosion on humidity in the 15 to 80% relative humidity range by testing ENIG (gold on electroless nickel), ImAg (immersion silver) and OSP (organic surface preservative) finished PCBs, soldered with organic acid flux.
A Sustainable Alternative - Humitector cards are halogen-free and cobalt dichloride free. Visit https://www.clariant.com/solutions/products/2017/10/31/00/12/humitector-type-2-nonreversible-humidity-indicator-card?utm_source=CLRYouTube&utm_medium=Vi
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
Events Calendar | Thu Jul 20 00:00:00 EDT 2023 - Thu Jul 20 00:00:00 EDT 2023 | Suwanee, Georgia USA
Atlanta Chapter Technical Meeting: The Science of Humidity Control in Manufacturing
ORION Industries | http://orionindustries.com/pdfs/nomex410.pdf
. Unless otherwise noted, all properties were measured in air under “standard” conditions (in equilibrium at 23°C, 50% relative humidity). Note that, like other products of papermaking technology, NOMEX
Imagineering, Inc. | https://www.pcbnet.com/blog/fr-4-vs-rogers-material-for-manufacturing-rf-pcbs/
. Generally, high temperature PCBs should aim for a continuous thermal load that is 25°C below the glass transition temperature. Moisture Absorption Printed circuit boards are sensitive to changes in atmospheric humidity, and RF PCBs are no exception
