Industry Directory | Manufacturer
Scienscope supplies inspection equipment, including stereo zoom microscopes, video an X-Ray inspection equipment, automated optical inspection systems, magnifiers, measurement systems.
Layer: 2 Material: FR-4 Board Thickness: 1.6mm Surface Finish: HAL Copper Thickness: 2/2 oz Green Solder Mask Layers: 2--36layers Max manufacturing size: 640mm*1100mm Copper foil thickness: 0.5OZ-13OZ Min line width/space: 3mil/3mil Min
NanoSlic™ Gold is our top of the line spray on coating applied to our UltraSlic™ solder paste stencil, which gives previously unseen performance benefits in transfer efficiency. The NanoSlic™ Gold coating also gives the benefits of improved under-ste
Electronics Forum | Fri Sep 21 10:35:37 EDT 2012 | davef
Flash gold is just thin electrolytic gold plating over electroless nickel or electrolytic nickel. Flash gold plating ... * Less than 3 microinch thick will be porous and take solder poorly * Greater than 10 microinch thick will cause brittle solder c
Electronics Forum | Mon Sep 24 10:07:46 EDT 2012 | eezday
The answer, as stated above, is 3 microinch's however, it is equaly important, if not more important, to understand that the only function of the gold is to protect the surfaces beneath it. Only enough gold to cover the nickel beneath it should be u
Industry News | 2016-11-30 14:47:45.0
ACI Technologies invites you to download a free copy of its very popular e-booklet, “Failure Analysis Techniques for Electronics” from its Website store, which is located at http://store.aciusa.org/Failure-Analysis-Techniques-for-Electronics-Digital-Download-P181.aspx
Industry News | 2013-10-28 16:31:54.0
IPC Conference on Solder and Reliability: Materials, Processes and Tests, November 13–14 in Costa Mesa, Calif.
Technical Library | 2014-08-07 15:13:44.0
Gold embrittlement in SnPb solder is a well-known failure mechanism in electronic assembly. To avoid this issue, prior studies have indicated a maximum gold content of three weight percent. This study attempts to provide similar guidance for Pb-free (SAC305) solder. Standard surface mount devices were assembled with SnPb and SAC305 solder onto printed boards with various thicknesses of gold plating. The gold plating included electroless nickel immersion gold (ENIG) and electrolytic gold of 15, 25, 35, and 50 microinches over nickel. These gold thicknesses resulted in weight percentages between 0.4 to 7.0 weight percent.
Technical Library | 2022-08-08 15:06:06.0
Selective soldering has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty however some types of challenging components require additional attention to ensure that optimum quality is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures, or solder pallets, often places additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors, can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues because of their beryllium copper base metal pins. Key Terms: Selective soldering, drop-jet fluxing, sustained preheating, flux migration, adjacent clearance, lead-to-hole aspect ratio, lead projection, thermal reliefs, gold embrittlement, solderability testing.
ACI Technologies Inc. (ACI) is a scientific research corporation dedicated to the advancement of electronics manufacturing processes and materials for The Department of Defense and industry. This video provides an overview of our commercial service
NanoSlic™ Gold is our top of the line spray on coating applied to our UltraSlic™ solder paste stencil, which gives previously unseen performance benefits in transfer efficiency. The NanoSlic™ Gold coating also gives the benefits of improved under-ste
Events Calendar | Tue Jan 23 00:00:00 EST 2018 - Tue Jan 23 00:00:00 EST 2018 | New Milford, Connecticut USA
FREE Webinar: Eliminate Circuit Board Problems and Failure Modes
Career Center | faridabad, India | Engineering,Production,Quality Control
My technical proficiency is extensive and is summarized on my resume (attached). As reflected on my resume (attached) I have completed my B-tech this Year.I am a fresher Electronics Engineer but having 6 months of PCB Assembling,PCB Manufacturing and
Career Center | faridabad, India | Engineering,Production,Quality Control
My technical proficiency is extensive and is summarized on my resume (attached). As reflected on my resume (attached) I have completed my B-tech this Year.I am a fresher Electronics Engineer but having 6 months of PCB Assembling,PCB Manufacturing and
-free soldering, established trends of increasing function
SMTnet Express, August 7, 2014, Subscribers: 23058, Members: Companies: 13975, Users: 36604 Gold Embrittlement In Lead-Free Solder. Craig Hillman, Nathan Blattau, Joelle Arnold, Thomas Johnston, Stephanie Gulbrandsen; DfR Solutions , Julie Silk
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2020/10/Reflow-Soldering-2020.pdf
) delivers high-performance and unmatched customer value through its reflow soldering technology. The company pioneered convection reflow soldering in the 1980s, and since then, Heller has set the gold standard for SMT reflow ovens, continuing to refine its systems to satisfy advanced application requirements
| http://etasmt.com/cc?ID=te_news_bulletin,23575&url=_print
. During reflow, with the addition of tin-lead solders, the intermetallic grows. With other board metal finishes, other metallics form, such as AuSn when soldering components to boards with gold-flash finish (and tin-lead solder
