Industry Directory | Manufacturer
COT specializes in high quality SMT nozzles and consumables for pick and place machines. We provide special engineering design service of custom nozzles for those unique and odd components.
When quality, cost, and time are considerations in the production of your assembly needs consider Micron Corporation
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulations, LED En
We manufacture and export Swaged Earth Rods (250 Microns) available with driving head and coupling, made from High Grade Brass, CDA 360 Brass, Free Cutting Brass or any special Brass Composition as per customer specification. It is mainly used in swi
Electronics Forum | Sat Jan 08 06:46:33 EST 2022 | jineshjpr
Hi anyone knows what is the minimum copper foil thickness available across the industries to make PCB surface. Intention is to achieve 23 microns of finished copper thickness in a 0.3mm thickness PCB. Ideally if 3 microns plates are available, additi
Electronics Forum | Fri May 30 20:54:53 EDT 2003 | jonfox
Conversion refresher: 1 inch = 25.4 mm 1 inch = 25,400 microns 10 microns = 0.3937 mils 10 microns = 0.010 mm so 0.4mm = 400 microns and for s/n/g: 1mm = 3.240783e-20 parsecs (pc) Have some fun with that one!
Used SMT Equipment | SMD Placement Machines
* Windows NT * Super fine head * Line Array camera * Pneumatic Tape Feeder * Locate pin * Edge Clamp System * Z servo push up plate * Entrance sub stopper * Exit sub stopper * Auto width adjust * Hi
Used SMT Equipment | SMD Placement Machines
* Windows NT * Flying Nozzle change head * Line array camera * Pneumatic Tape feeder * Main Stopper * Locate Pin * Edge Clamp system * Z servo push up plate * Entrance sub stopper * Exit sub stopper *
Industry News | 2002-03-29 08:28:28.0
Has Found a Buyer for its Wafer Fabrication Facility in Plymouth, England
Industry News | 2003-04-21 09:53:12.0
Michael T. O'Neill and Peter J. Simone
Parts & Supplies | SMT Equipment
DEK wiping cylinder (165675) PLEASE CHECK WITH YOUR LOCAL DEK CALL CENTRE. MPU 602137 * 2 MAY BE REQUIRED FOR MICRON OR INST INCTIV MACHINES. GL Applicable models: DEK265/GSX/LT / ELA / HOZ / INF
Parts & Supplies | SMT Equipment
DEK wiping cylinder (165675) PLEASE CHECK WITH YOUR LOCAL DEK CALL CENTRE. MPU 602137 * 2 MAY BE REQUIRED FOR MICRON OR INST INCTIV MACHINES. GL Applicable models: DEK265/GSX/LT / ELA / HOZ / INF
Technical Library | 2021-09-02 08:17:07.0
We are a professional manufacturer of PCB depaneling machines, which is workable for all boards, including flex and regid boards, v-scored boards and routed boards. Laser pcb depaneling is non-contact way without mechanical stress,this solution is good for modern precision PCB depaneling. It has below advantages: 1. No dust The production environment of the circuit board industry is carried out in the dust-free workshop. The traditional pcb depaneling equipment, such as blade moving type machine, will inevitably produce residues and micro powder, which will pollute the 10000 and 1000 class dust-free workshops and affect the conductivity of products. The UV laser PCB cutting machine is a vaporization processing process, which will not produce dust and is conducive to the conductivity of the product. 2. High cutting precision The processing gap of high-precision traditional processing equipment can not reach the gap width of less than 100 microns, which will cause certain damage to the lines on the edge or PCBA circuit board containing components. The focus spot of the laser cutting machine is small, and the ultraviolet cold processing mode has little thermal impact on the edge of the circuit board. The cutting position accuracy is less than 50 microns, and the cutting size accuracy is less than 30 microns, which will not affect the edge of the circuit board, and the precision is high. 3. No stress Traditional processing methods generally have V-grooves, which will cause certain damage to the board in the manufacturing process. The UV laser PCB cutting machine can directly cut the bare board without making V-grooves. In addition, the traditional processing methods directly use tools to act on the circuit board, especially the stamping method has a great impact on the circuit board, which is easy to cause board deformation. The laser cutting machine is a non-contact processing mode, which acts on the surface of the material through the high-energy beam, which will not cause the influence of stress and the deformation and damage of the circuit board. 4. For special-shaped cutting, it is easy to automate The UV laser PCB cutting machine can cut for any shape without replacing any props and fixtures, and without steel mesh. The same equipment can meet special-shaped and straight-line cutting, which is easy to realize assembly line automatic production and high flexibility. It is easy to improve production efficiency and save production process and production cycle. In particular, it can quickly and efficiently meet the needs of rapid proofing, directly import the drawing, and then locate the cutting. 5. High compatibility The UV laser PCB cutting machine can process the materials around the circuit board, such as PCB, FPC, covering film, pet, reinforcing board, IC, ultra-thin metal cutting, etc. it has strong practicability, is compatible with the processing of a variety of materials, is easy to operate, can be imported into the drawing, does not need to adjust any mechanical parts, and is easy to operate and maintain. 6. Good cutting edge effect The cutting edge is smooth and neat without burr. It can be processed and formed directly according to the size of the drawing, which is conducive to improving the yield of the product. It can be directly installed into the subsequent process without further processing. For more details about UV laser depaneling, please feel free to contact us. www.pcbdepanelingrouter.com
Technical Library | 2009-07-22 18:33:41.0
This paper deals with the thermal effects of joule heating in a high interconnect density, thin core, buildup, organic flip chip substrate. The 440 μm thick substrate consists of a 135 μm thick core with via density of about 200 μm. The typical feature sizes in the substrate are 50 micron diameter vias is the core/buildup layers and 12 micron thick metal planes. An experimental test vehicle is powered with current and the temperature rise was measured. A numerical model was used to simulate the temperature rise in the TV.
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulations, LED En
YAMAHA Mounter-YS12 1) All-round high-precision placement machine; 2) 0.1 second/CHIP ultra-high-speed placement (the best condition is 36000 points/hour); 3) In IPC9850 state, the patch speed is up to 24000CPH; 4) Ensure that the entire plac
Events Calendar | Tue Jan 23 00:00:00 EST 2018 - Tue Jan 23 00:00:00 EST 2018 | Fremont, California USA
Digital X-Ray Inspection Services Open House
Career Center | , | 2017-08-02 07:10:16.0
(in Dutch) Hiervoor zoeken we een HBO software ontwikkelaar met affiniteit voor mechanica. Onze testers doen materiaal tests op basis van zeer nauwkeurige bewegingen en krachtmetingen. Positionering gaat met een nauwkeurigheid op sub-micron niveau.
Career Center | , | 2017-08-02 07:10:38.0
(in Dutch) Hiervoor zoeken we een HBO software ontwikkelaar met affiniteit voor mechanica. Onze testers doen materiaal tests op basis van zeer nauwkeurige bewegingen en krachtmetingen. Positionering gaat met een nauwkeurigheid op sub-micron niveau.
Career Center | Karachi, Pakistan | Engineering,Maintenance,Research and Development,Sales/Marketing,Technical Support
• Experienced in SMT Production, working on Siplace X Series-S and DEK-Micron Printer, on Siplace Pro and Siplace Explorer. • Having Strongly Skills of calibration of SMT machine, twin head, Multi star head, speed star head, gentry, Nozzles, feeders,
Career Center | , California USA | Sales/Marketing
Regaional Sales Manager / Account Manager / Sales Engineer
