Industry Directory | Other / Consultant / Service Provider / Manufacturer
ScanCAD is an industry leader in inspection, measurement, process control and reverse engineering. Our solutions support OEM's, manufacturers, stencil fabricators, repair depots, and others in optimizing quality and yield.
Industry Directory | Manufacturer
Manufacture of feeders and other electronic component handling and transport systems
New Equipment | Rework & Repair Equipment
Angled Flat Reamer Miniature (left) & Standard (right) Tools with the Miniature Angled Flat Reamer: SH-20D Tools with the Standard Angled Flat Reamer: SH-20B Applications 30 degree bend at the tip allows access to more difficult areas. Us
New Equipment | Rework & Repair Equipment
Inspection Mirror (SH-133S) The new inspection mirror meets clean room requirements yet is sufficiently economical for non-clean room applications. A quality tool for the technician but inexpensive enough to meet the budgetary requirement of modern
Used SMT Equipment | SMT Equipment
Laser identification: 0603- length of 33.5MM square element laser head *1 (6 nozzle) Can be corresponding to the length of 1500MM substrate production JUKI to boast of laser recognition technology to achieve high precision and high quality producti
Used SMT Equipment | SMT Equipment
JUKI JX-300LED Surface Mount Machine Laser identification: 0603- length of 33.5MM square element laser head *1 (6 nozzle) Can be corresponding to the length of 1500MM substrate production JUKI to boast of laser recognition technology to achieve h
Industry News | 2003-02-20 08:04:10.0
The Mini-Fix card-to-cable connector is designed to withstand hundreds of mating cycles with high contact security and mechanical stability.
Industry News | 2003-03-13 08:19:18.0
The Flakafix 2.54mm grid IDC board-to-cable connector can now be supplied with a variety of terminations including surface mount, solder-in, press-fit and pin-in-paste.
.jpg)
.jpg)
Technical Library | 2023-07-22 02:26:05.0
Patch offset; Uneven patches throughout the substrate (each substrate is offset in a different way); Only part of the substrate is offset; Only certain components are offset; The patch Angle is offset; Component absorption error; Laser identification (component identification) error; Nozzle loading and unloading error; Mark (BOC mark, IC mark) identification error; Image recognition error (KE-2060 only); Analysis of the main reasons for throwing material. More information about KINGSUN please Contact US at jenny@ksunsmt.com or visit www.ksunsmt.com
Technical Library | 2019-11-15 02:20:26.0
Material Aging Test-UV Weathering Test Chamber 1.What is UV aging? UV aging chambers use fluorescent ultraviolet lamp as light source to simulate UV radiation and condensation in natural sunlight, and to carry out accelerated weather resistance test in order to obtain the result of weather resistance of the material. UV aging detection is widely used in non-metallic materials, organic materials (such as coatings, paints, rubber, plastics and their products) under the change of sunlight, humidity, temperature, condensation and other climatic conditions to test the aging degree and situation of related products and materials. 2.Why we should do UV aging test? When the product is placed in the ambient environment, there will be different problems taken place, such as appearance changes, including cracking, speckle, powdering or color change, and even performance degradation,which may be due to the loss of components in the resin resulting in chemical bonds changes inside the molecular structure, this is mainly caused by sunlight, industrial exclusion of waste gas, bacteria and so on. The aging performance of the product directly affects the lifespan of the product, so aging test become significant,non-metallic materials, organic materials (such as paints, paints, rubber, plastics and their products) are subject to changes in sunlight, humidity, temperature, condensation and other climatic conditions to test the degree and condition of aging of related products and materials. The natural aging test is to put the plastic specimen under the sun exposure, and it is directly under the natural climate environment,to test the material performance under various factors such as light, heat energy, atmospheric humidity, oxygen and ozone, industrial pollution and the like, the most harsh climate condition should be selected,or near the actual application area of the material, the test site shall be open and flat, no obstacle to affect the test results,the specimen holder shall be facing the equator and at an angle of 45 ° from the ground. When the main performance index of the specimen has been reduced, the test s/b terminated when it achieve the minimum allowable use value . in most case,the test is terminated when the product primary performance index falls to 50% of the initial value. The natural aging process is a very slow process, and there is a great difference in different geographical conditions, which brings difficulties to evaluate the aging resistance of the product. It is an attempt to make an evaluation of the aging performance of the plastic in a shorter time,that is accelerated aging test. The accelerated aging test can be used to simulate the human light source of the fluorescent lamp, including the carbon arc lamp, the xenon arc lamp and the fluorescent ultraviolet lamp, and the artificial light sources can generate more light than the natural sunlight on the ground. When these artificial light sources are used, it is also common to use the combination of the condenser to simulate the rain drop, the dew and the like to conduct the aging test on the product.
PCB pad circuit repair using epoxy. Using multiple angles including overhead and from both right and left angles the BEST instructor staff demonstrates plainly how to repair a PCB pad using the epoxy method. This method is per IPC 7721 4.4.1. http://
Refurbished YAMAHA YV100XG SMT Pick and Place Machine Machine Type YV100XG Substrate size M type L460 * W335 (MAX) -L50 * W50 (MIN) L type L460 * W440 (MAX) -L50 * W50 (MIN) Mounting accuracy Absolute accuracy (μ + 3σ): ± 0
Career Center | , Philippines | Engineering,Maintenance,Production,Technical Support
>Conduct service support for South east Asia customer 1.Operating, maintenance and quick troubleshooting of Hitachi modular chip mounter GXH-1S �� NL axis motor replacement �� HL axis motor replacement �� NS axis m
Career Center | , Gjirokaster Philippines | Engineering,Production,Quality Control,Research and Development,Technical Support
TEST Engineer FOXCONN(Hon Hai Precision Ind., Ltd., Co)-formerly AMBIT Microsystems Co. Inc. Research and Development Center 5F-1 No. 5, Hsin Ann Road, Science-Based Industrial Park, Hsinchu City, Taiwan, R.O.C. General Job Functions: PCBA Testing u
SMTnet Express, December 24, 2014, Subscribers: 23,651, Members: Companies: 14,149, Users: 37,444 Profiled Squeegee Blade: Rewrites the Rules for Angle of Attack Ricky Bennett, Rich Lieske - Lu-Con Technologies , Corey Beech - River
