Industry Directory | Manufacturer
Depanelizer Equipment and Tools For Electronic Assembly. PCB Racks and Trays. Wire Crimp Press and Tooling.
Printed Circuit Board Nibbler Machine Specifications: Action stroke times 12 times / min Working dry air pressure 0.50-0.70 Mpa Slide stroke 2 mm PCB Nibbler Machine Weight 2 kg PCB Nibbler
Printed Circuit Board Nibbler Machine Specifications: Action stroke times 12 times / min Working dry air pressure 0.50-0.70 Mpa Slide stroke 2 mm PCB Nibbler Machine Weight 2 kg PCB Nibbler
Electronics Forum | Wed Jan 12 16:53:06 EST 2000 | Jason Webbs
Jacob, There are several companies I saw at a recent trade show that had "nibblers" that snap the tabs out. They are also called "board shockers" because they really shock the boards when they snap out the tabs. I did talk to a guy from a company
Electronics Forum | Wed Nov 13 15:00:57 EST 2019 | stephendo
I have seen resistors cracked during placement. The part was programmed incorrectly and the nozzle pushed down on the part too hard. I do not remember seeing any cracked during depanelization. Nibblers can cause damage if they are on the bottom and
Industry News | 2022-02-17 12:52:30.0
Cleanly and easily separate a row of up to 10 tabs without dust. Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N115 Nibbler from FKN Systek. Two sharp support blades on either side of the tab help cleanly slice the PCBs from the tabs.
Industry News | 2017-01-25 16:39:34.0
Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses of .120”, .093” and .062”. Custom sizes to match the width of the routed section can be ground. Tabs are cut cleanly on each side so that no further clean up is required to remove excess material, as is often the case when using hand tools or when breaking the panels manually. In addition, since only one tab is cut at a time, minimal stress is imparted to the board during the process as the panel is not pressed between two points during the cut.
Cleanly and easily separate tab routed PCBs without dust. Singulating tab routed printed circuit cards in low to medium volume production quantities is safe and easy with the N100 Nibbler from FKN Systek. Blades are available in standard thicknesses
Singulate Straight Tab Routed Panels Store cut tabs inside tool for discarding at operator convenience Available with 3 blade types and choice of support dies Clean cut - requires no rework for deburring PCB edges Easy blade change in under 5 m
