Industry Directory | Manufacturer
We are an online auction company. pls visit www.henrybutcher.com for many equipments listing.
Industry Directory | Consultant / Service Provider / Manufacturer
Nitrogen generator engineer and manufacturer. Custom nitrogen gas generators for a wide variety of industrial, military, and lab applications. All products are made in the USA.
The PCB Footprint Expert is a powerful CAD library development tool powered by our own proprietary CAD LEAP Technology (Libraries Enhanced with Automated Preferences). It is packed with very powerful advanced library management features that cuts foo
New Equipment | Assembly Services
Custom Coils is a leading manufacturer of 12V DC igniters in the USA that has been involved in winding and building DC igniters from more than 20 years. Features and Specifications Input Voltage Range: +10.5V to +15V DC Nominal Input: +12V DC @
Electronics Forum | Wed Mar 13 09:08:40 EST 2002 | stockley
It is a little bit sad that I know this - be prepared for some confusision - this is not as simple as it might seem. Something tells me that the calculation of the tolerances for the nominal dimensions is a little inconsistent. As I recall the defa
Electronics Forum | Fri Jun 14 00:47:17 EDT 2013 | mun4o
Thanks , Reese.Yes , I check the capacitors with C-meter.When measured with C-meter , all capacitors are OK - +/-10% of the value. I can not underst?nd "Note: This is not a summation). Y5V -- -20% of nominal value, -part tolerance, -machine toleranc
Used SMT Equipment | In-Circuit Testers
2 V at 1 MicroA, Vil = Timebase Specifications: Standard: Frequency: 10 MHz Uncertainty: 1 ppm Temperature Stability: 1 ppm Aging Rate: 1 ppm/yr, 5 ppm/10 years External Reference: Input: EXT REF IN Connector Frequency: 10.0 MHz Level: 0.
Used SMT Equipment | In-Circuit Testers
Fluke 2640A NetDAQ Fluke 2640A NetDAQ Networked Data Acquisition Unit Analog inputs: 20 Computed Channels: 10 Digital I/O & Alarm Outputs: 8 total Totalizer: 1 Scan speed: Slow 6 channels/second nominal Medium: 41 (50 Hz), 48 (60 Hz) chan
Industry News | 2003-03-14 09:03:48.0
Sarantel has developed a surface-mount version of its active GeoHelix miniature GPS antenna.
Industry News | 2003-05-29 08:30:31.0
Losses halved in the first half year � New organization of electronics group next on the agenda
Parts & Supplies | Pick and Place/Feeders
Which series nozzles could be used for Phlips Topaz and Emerald machine As we know, many parts are compatible for Yamaha and Philips machines, but some models their nozzles are not generic.So which series nozzles could be used for Phlips Topaz and
Technical Library | 2019-11-12 02:09:22.0
Thermal shock test chamber can be used for testing the chemical change or physical damage on composite materials caused by the thermal expansion and contraction of the sample in the shortest time,which is subjected to extremely and continuous high and low temperature environment.so how to check the temperature recovery time of this chamber? Normally we take following steps to inspect the temepratuire recovering time: 1.Install the temperature sensor at the specified position, and adjust the temperature controller of hot zone and cold zone to the required nominal temperature respectively. 2.The temperature increases and reduces respectively,30min after temperature in two zones reach stable status,record temperature value of the measuring point,pls set the temperature value of two zones to be required nominal temperature. 3.The temperature shock test chamber automatically places the inspected load into theh ot zone,select the corresponding retention time according to regulated standard. 4.Set the transfer time,then the inspection load is transferred from hot zone to cold zone, and the temperature of the measuring point is observed and recorded, and then the reverse conversion of the load from cold zone to hot zone is carried out according to the same method, and the temperature of the measuring point is observed and recorded. www.climatechambers.com
Technical Library | 2021-07-13 19:59:34.0
We have investigated the processing of lead-zirconate-titanate-based thick films by inkjet printing Pb (Zr0.53Ti0.47)0.98Nb0.02O3 with a 6 mol% excess of PbO nanosized powder dispersed in water. Differentwaveforms were employed to determine the optimum size and shape of the drops. A uniform, defect-free pattern with dimensions of 4 mm × 4 mm can be printed using 20 V and a drop spacing of 20 μm. The inkjet-printed films were heated to 400 °C to remove the organics and subsequently sintered at 750 and 850 °C. The correlations between the density, grain size and electromechanical properties of the thick films and bulk ceramics are qualitatively discussed. A thickness coupling factor of 46% was obtained for a 15-μm-thick film sintered at low temperature of 850 °C, which is comparable to the value of the bulk ceramic with an identical nominal chemical composition. Our results are important for the economic and environmental-benign printing of piezoelectric materials applicable in variety of electronic devices, such as sensors, actuators, transformers, piezoelectric energy harvesters and transducers.
The PCB Footprint Expert is a powerful CAD library development tool powered by our own proprietary CAD LEAP Technology (Libraries Enhanced with Automated Preferences). It is packed with very powerful advanced library management features that cuts foo
Events Calendar | Tue Jun 13 00:00:00 EDT 2017 - Tue Jun 13 00:00:00 EDT 2017 | Rolling Meadows, Illinois USA
Webinar Class III -The Deadly Sins of SMT Assembly
Career Center | , | Engineering,Production
Project Management, SMT Process Engineering
Heller Industries Inc. | https://hellerindustries.com/parts/7622/
7622 - KWIK CLAMP, DOUBLE SNAPPER, 3/4" NOMINAL Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
ORION Industries | http://orionindustries.com/pdfs/mylarel21.pdf
. Typical Values for Major Properties Tensile Dimensional Nominal Strength Stability Dielectric Thickness, MD/TD,* Elongation MD/TD,* Density, Strength (AC), µm (Gauge) kg/mm2 (kpsi) MD/TD,* % % Shrinkage Opacity
