Electronics Forum | Thu Jul 05 13:47:10 EDT 2007 | arun2382
QFN assembled on a PCB indicates paramteric fails when tested. When the QFN on PCB is reflowed a second time, it recovers and passes testing. Visual, X-ray inspection revealed no anomalies. Cross-section images of solder joint revealed no anomalies (
Electronics Forum | Thu Jul 05 17:10:29 EDT 2007 | arun2382
Thanks all! I'm facing this issue with one specific batch of QFNs. It could be a plating issue. But, nothing was evident from visual inspection,No sign of voiding or non-wetting. Cross-section images of solder joints were clean as well. Could this s
Industry News | 2018-10-18 08:21:10.0
How to Prevent Non-Wetting Defect during the SMT Reflow Process
Industry News | 2013-09-10 12:18:26.0
The Surface Mount Technology Association (SMTA)'s Intermountain Chapter will hold its annual technical symposium on September 19 at the University of Utah in the Warnock Engineering Building, Salt Lake City, Utah.
Technical Library | 2014-03-06 19:04:07.0
Over the last few years, there has been an increase in the rate of Head-in-Pillow component soldering defects which interrupts the merger of the BGA/CSP component solder spheres with the molten solder paste during reflow. The issue has occurred across a broad segment of industries including consumer, telecom and military. There are many reasons for this issue such as warpage issues of the component or board, ball co-planarity issues for BGA/CSP components and non-wetting of the component based on contamination or excessive oxidation of the component coating. The issue has been found to occur not only on lead-free soldered assemblies where the increased soldering temperatures may give rise to increase component/board warpage but also on tin-lead soldered assemblies.
Training Courses | | | PCB Assembly Courses
The PCB assembly courses provide knowledge of different processes and equipment used in TH and SMT assembly of printed circuit boards.
| https://www.eptac.com/blog/are-voids-in-solder-joints-really-an-issue
Are Voids in Solder Joints Really an Issue? Looking for solder training standards, manuals, kits, and more? Visit soldertraining.com Training Training Materials Locations Resources Ask Helena
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_orcad-17-2-decimal-separator-issue_topic2060.xml
PCB Libraries Forum : Orcad 17.2 Decimal Separator Issue PCB Libraries Forum : Orcad 17.2 Decimal Separator Issue This is an XML content feed of