.jpg)
Layer Count: 8L Board Thickness: 1.0mm Panel Dimension:190*86mm/2up Material: S1141 Copper on board surface: 35μm Min Hole Diameter: 0.1mm Min line Width/Space: 8/8mil Surface Finish: ENIG+Selective OSP in BGA area This quick turn PCB is manufacture
Electronics Forum | Thu Jul 06 23:59:11 EDT 2017 | heros_electronics
We got an inquiry from US that requires high volume 8 layer 1.0mm PCB, OSP + selective ENIG surface, 5 groups impedance control, and stacked vias. These requirements are common, but there is 2/2mil lines in inner layers. It's said that this order was
Electronics Forum | Mon Jul 24 20:39:49 EDT 2017 | dawson
We got an inquiry from US that requires high > volume 8 layer 1.0mm PCB, OSP + selective ENIG > surface, 5 groups impedance control, and stacked > vias. These requirements are common, but there is > 2/2mil lines in inner layers. It's said that th
Surface Mount Technology Association (SMTA) | https://www.smta.org/certification/recertification.cfm
. James Hall are divided into 11 modules each with slides and a quiz on the following updated topics: PCB Basics and Surface Finishes like HASL and ENIG Surface Finishes like OSP, Immersion Tin, Immersion Silver Paste, stencils, printing and how they are interrelated Component placement with a focus
