Industry Directory | Manufacturer
Professional manufacturer of PTC & NTC thermistor, temperature sensor pressure Sensors. Thermistors for overload over-current protect, inrush current limit, temperature sense measurement compensation control, protect.
Industry Directory | Manufacturer
the company currently has more than 80 employees, over 30 professional and technical personel, 15 nationally recognized professionals and 9 technical personeel with medium to senior professional titles.
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
Circuit protection is to protect electronic components in the circuit mainly in over voltage, over current, surge, electromagnetic interference. With the development of science and technology, electric/electronic products have been increasingly diver
Electronics Forum | Thu Oct 04 21:39:44 EDT 2012 | jeffr
Are you saying that the buttons on the Joystick work, but the Joystick lever for XY is not working?
Electronics Forum | Wed Sep 19 06:42:56 EDT 2012 | ekki511
Hello alltogether we have some old assembleon mashines here in hungary. Since some days we are fighting with our Eclipse. After started if we push the ready button appear the error code : L006:Tr.over current. Does anyone know what is Tr. ? Is this
Used SMT Equipment | Chipshooters / Chip Mounters
YAMAHA YSM10 PICK AND PLACE MACHINE SPECIFICATION :YSM10 Object base size :L510 x W460 mm ～ L50 x W50 mm ※Optional accessories can correspond to the L610mm substrate Mounting capacity:HM mounting head (10 nozzles) specification /HM5 mount
Used SMT Equipment | Screen Printers
Right; Right->Left; Left-> Left; Right->Right details icon Details Print Pressure : 0kg to 20kg Print Speed : 2mm/sec to 300mm/sec Print Gap : 0mm to 6mm Squeegee : Clamped double trailing edge squeegee (1 set included) Squeeg
Industry News | 2016-06-22 15:33:28.0
Based on its recent analysis of the surface mount technology (SMT) reflow soldering equipment market, Frost & Sullivan recognizes Heller Industries, Inc. with the 2016 Global Frost & Sullivan Award for Growth Excellence Leadership. Heller Industries has made remarkable improvements to its product and technology portfolios over the last 10 years to emerge a top participant in the SMT reflow soldering equipment market.
Industry News | 2023-10-18 17:43:18.0
HELLER's High UPH Vacuum Reflow Oven clinched the coveted "Step-by-Step Excellence Awards" - Innovation Award owing to its industry-leading product strength and outstanding performance.
Parts & Supplies | Pick and Place/Feeders
GFC-Y01 YAMAHA Feeder Storage Cart The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling. When its time to change over to the next job, the cart is
Parts & Supplies | Pick and Place/Feeders
GFC-P01 PANASERT MSR Feeder Storage Cart The feeder storage cart gives your operators a secure place to put unused feeders between set-ups minimizing failures due to improper storage or handling. When its time to change over to the next job, the
Technical Library | 2019-05-30 10:59:13.0
In the current economic environment, the ability to reuse ball grid array(BGA) components that have failed due to solder defects may be an efficient way for electronics manufacturers to reduce costs. Cost may not be the only driving factor in the decision to engage in this recycling practice. The increasing demands placed upon the complexity of microprocessors and integrated circuits (ICs) has decreased the availability of some components, and increased their lead time. Because of this, reballing may provide a means to meet schedule, reduce rework turn-around time, and give a manufacturer a decisive advantage over other companies in an ever increasingly competitive market. This article will discuss the process of reballing BGA components (Figure 1), examining preparation (the preform method, the screen method), and cleaning and bake-out.
Technical Library | 2019-12-12 02:43:44.0
Today we discuss the reason that causes temperature humidity chamber to alarm,In most cases, the equipment alarm is caused by the improper operation in the process of use, which mainly includes following reasons:that are refrigeration system, temperature system and circulating system. First, Refrigeration system 1, refrigeration compressor overpressure alarm. If the refrigerant pressure exceeds the set value, it will stop and alarm at the same time. At this time, the fault must be eliminated and then manually reset. 2, short phase power supply, phase sequence alarm. When the external power supply of the equipment is out of phase or the phase sequence is changed, it will stop and alarm at the same time. 3. The circulating cooling water is short of water to alarm. When the water pressure of the cooling circulating water system is insufficient, it will stop and alarm at the same time, and it must wait for the fault to be eliminated and reset at the same time before it could run normally. 4, refrigeration compressor overheating alarm. When the coil of the compressor is overheated and the power supply of the line is not normal, it will stop and alarm at the same time. Second, Temperature system 1, the overtemperature alarm in the chamber. The sensors in the channel and the sample area are equipped with overtemperature protection devices, and there are also overtemperature protecter on the control panel. When the temperature in the working chamber exceeds the setting value on the controller, it will stop and alarm. 2. sample overtemperature protection. When the temperature in the sample area exceeds the protection temperature set by the controller, it will stop and alarm at the same time. The overtemperature protection of the sample is divided into upper limit protection and lower limit protection, which can be set according to the demand, Third,Circulating system 1. The alarm is caused by the overheating of the circulating fan. When the coil of the fan is over-heated, the alarm will be stopped at the same time. 2. The fan over-current alarm. When the current of the fan exceeds the allowable value, the alarm is stopped at the same time, and the normal operation can only be carried out after the fault maintenance of the overcurrent is completed. This is what we talk about today,if you have more questions,let us know.
Volumetric Dispense Pump - PCD Technology revolutionizes how you dispense and how you perceive dispensing. PCD - Progressive Cavity Displacement PCD is a continuously volumetric dispense pump based on the Progressive Cavity principle. PCD technolog
Precision PCB Services, Inc. to Exhibit at the SMTA’s Tampa Bay Expo & Tech Forum, which will take place on October 5, 2021 at Embassy Suites by Hilton Tampa Airport Westshore. 555 N Westshore Blvd., Tampa Bay, Florida. Pre
Training Courses | | | IPC/WHMA-A-620 Specialist (CIS) Recert.
The Certified IPC/WHMA-A-620 Specialist (CIS) recertification courses are intended for those individuals who were previously certified as IPC/WHMA-A-620 Specialist.
Training Courses | | | IPC J-STD-001 Space Specialist (CIS)
The J-STD-001 Space Addendum is an additional optional module for the Certified IPC J-STD-001 CIS (Specialist) program for organizations that are required to meet these additional requirements.
Events Calendar | Tue Jun 26 00:00:00 EDT 2018 - Thu Jun 28 00:00:00 EDT 2018 | College Park, Maryland USA
Symposium on Counterfeit Parts and Materials
Events Calendar | Thu Mar 25 00:00:00 EDT 2021 - Thu Mar 25 00:00:00 EDT 2021 | ,
Webinar: Process Control to Ensure Electrochemically Reliable Electronics
Career Center | Cork, Ireland | Production
Trainee Manufacturing Engineering Technician Background Moog Ltd. is located in Ringaskiddy, 8 miles outside Cork city, and currently employs over 120 people. The plant is the Corporate Electronics Manufacturing facility for Moog world-wide and su
Career Center | , Washington USA | Engineering,Management,Sales/Marketing
Do yor sales abilities over sell your current EMS employer? Are you tired of bringing in millions of dollars of potential new business, only to find out your company cannot close the deals or doesn't have the capacity to handle your clients? If you
Career Center | Costa Mesa, California | Maintenance,Production,Technical Support
Manufacturing tech/eng for a contract manufacture for 10+ years. Been working in the SMT industry for a total of 17yrs. Have done everything from operator to process work. Most familiar with Assembleon, MPM, Electrovert equipment. Have also done off-
Career Center | , Florida USA | Engineering,Management,Quality Control,Research and Development,Technical Support
Resourceful, innovative professional with over 15 years in the Electronic Industry, with domestic and international experience. Expertise in initiating projects and programs that boost efficiency and productivity while expanding employee education.
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/import-pod-parts-directly-into-current-fpx-library_topic1327_post5382.html
Import POD Parts Directly Into Current FPX Library - PCB Libraries Forum - Page 1 Forum Home > PCB Footprint Expert > Product Suggestions New Posts FAQ Search Events Register
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/-/media/Files/Nordson/efd/Products/Data-Sheets/Thermal-Compound/Nordson_EFD_Thermal_Compound_Selector_Guide.pdf?la=en
: Ohm-cm 1.65x10^14 1.0x10^13 2.0x10^15 2.0x10^15 over current over current over current 2.15x10^15 over current 7.28x10^13 Operating Temperature
