Electronics Forum | Fri Nov 22 10:38:30 EST 2002 | slthomas
The follwing is from the Technet archives, per IPC's Jack Crawford. I dug it up during some investigation of a supplier's issues with humidity in an Asian plant: There is support for this in IPD-HDBK-001 w/Amendment 1 Handbook and Guide to Suppleme
Electronics Forum | Sat Aug 25 08:39:15 EDT 2007 | gsala
If plastic Carrier Tape (CT)/ emboss tape, is made by: a)Polycarbonate material, it can withstand temperature around 120C� or may be more mantaining original dimension. b)Polystirene material, at max 45�C-50C� the CT starts to change dimensions and
Used SMT Equipment | Pick and Place/Feeders
Type Pick and Place machineDimension off-line (L x W x H) 2150 x 1700 x 1500 mm (+500 mm for signal light)Dimension in-line (L x W x H) 1750 x 1300 x 1500 mm (+500 mm for signal light)Board thickness min. 0.5 mm - max. 4.5 mm thickBoard size min. 30
Industry News | 2018-12-08 03:29:29.0
SMT Dictionary – Surface Mount Technology Acronym and Abbreviation
Industry News | 2018-10-18 09:37:27.0
How To Set Profile In SMT Reflow Oven
In the world of makers, people enjoy the fun of designing and developing hardware/ software, even final electronic products. They will not concentrate a lot on the cost and manufacturability. But it is quite different from lab to factory, when it com
ORION Industries | http://orionindustries.com/pdfs/300lse.pdf
Adhesive Transfer Tapes with Adhesive 300LSE 9453LE • 9471LE • 9472LE - 2 - 15 Minute Room 72 Hour Room 3M™ Adhesive Temperature Temperature Transfer Tape Oz./In. N/100 mm Oz./In
ASCEN Technology | https://www.ascen.ltd/Products/PCB_board_assembly_system/vision_measurin/505.html
verage Room Temperature: 18 - 22°C Maximum Thermal Gradients: 2 °C/day, 1°C/hour, 1°C/meter surrounding the machine. Humidity: 40% to 70%2). The location must be far away from the vibration source to avoid being placed above the two floor so as not to affect the accuracy of the vibration Avoid direct sunlight and use the RC structure as
